Jinlong Pan 
- (2024): Development of a novel extrusion device to improve the printability of 3D printable geopolymer concrete. In: Journal of Building Engineering, v. 88 (July 2024).
- (2024): Development of High-Performance Sticky Rice–Lime Composite with Metakaolin and Hemp Fibers. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 5 (May 2024).
- (2024): Development of self-sensing engineered cementitious composite sensors for monitoring flexural performance of reinforced concrete beam. In: Developments in the Built Environment, v. 18 (April 2024).
- (2023): Development of impact-resistant mycelium-based composites (MBCs) with agricultural waste straws. In: Construction and Building Materials, v. 389 (July 2023).
- (2023): Effect of steel fiber on the permeability of freeze-thaw damaged concrete under splitting tensile and compressive loads. In: Journal of Building Engineering, v. 80 (December 2023).
- (2024): Bond behavior between steel-FRP composite bars and engineered cementitious composites in pullout conditions. In: Engineering Structures, v. 299 (January 2024).
- (2023): Experimental investigation on the seismic behavior of composite steel plate shear wall restrained by ECC panels. In: Engineering Structures, v. 297 (December 2023).
- (2023): Effect of Temperature on the Low-Velocity Impact Behaviors of Engineered Cementitious Composite. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 7 (July 2023).
- (2023): Behaviors of eccentrically loaded ECC-encased CFST columns after fire exposure. In: Engineering Structures, v. 289 (August 2023).
- (2022): Axial compressive behaviors of engineered cementitious composites-encased concrete filled steel tube columns after fire exposure. In: Engineering Structures, v. 273 (December 2022).
- (2022): Bond behavior between steel bars and 3D printed concrete: Effect of concrete rheological property, steel bar diameter and paste coating. In: Construction and Building Materials, v. 349 (September 2022).
- (2022): Effect of reinforcement configurations on the flexural behaviors of 3D printed fiber reinforced cementitious composite (FRCC) beams. In: Journal of Building Engineering, v. 46 (April 2022).
- (2022): Correlation of flaw structure and cracking behavior in SHCC with X-ray CT scanning technique. In: Construction and Building Materials, v. 331 (May 2022).
- (2022): Experimental and analytical study on shear behavior of strain‐hardening cementitious composite beams reinforced with fiber‐reinforced polymer bars. In: Structural Concrete, v. 23, n. 2 (April 2022).
- (2020): Experimental study on local compressive behaviour of ECC ring beam connections. In: Structures, v. 27 (October 2020).
- (2020): Behavior of geopolymeric recycled aggregate concrete-filled FRP tube (GRACFFT) columns under lateral cyclic loading. In: Engineering Structures, v. 222 (November 2020).
- (2020): Behavior of high-performance concrete under multiaxial tensile-compressive loading. In: Construction and Building Materials, v. 260 (November 2020).
- (2020): Experimental study on mechanical behavior of high-strength high-performance concrete under biaxial loading. In: Construction and Building Materials, v. 258 (October 2020).
- (2020): Bond behaviours of deformed steel rebars in engineered cementitious composites (ECC) and concrete. In: Construction and Building Materials, v. 252 (August 2020).
- (2020): Behavior of ECC-encased CFST columns under eccentric loading. In: Journal of Building Engineering, v. 30 (July 2020).
- (2020): Electrical resistivity of fly ash and metakaolin based geopolymers. In: Construction and Building Materials, v. 234 (February 2020).
- (2019): Development mechanism of plastic hinge in reinforced engineered cementitious composite beams under monotonic loading. In: Structural Concrete, v. 20, n. 1 (February 2019).
- (2007): Effect of Concrete Composition on FRP/Concrete Bond Capacity. In: Journal of Composites for Construction, v. 11, n. 6 (December 2007).
- (2008): Effect of End Tapering on Crack-Induced FRP Debonding from the Concrete Substrate. In: Journal of Composites for Construction, v. 12, n. 1 (February 2008).
- (2010): Effect of multiple secondary cracks on FRP debonding from the substrate of reinforced concrete beams. In: Construction and Building Materials, v. 24, n. 12 (December 2010).
- (2013): A comparison of engineered cementitious composites versus normal concrete in beam-column joints under reversed cyclic loading. In: Materials and Structures, v. 46, n. 1-2 (January 2013).
- (2018): Characterisation of the interfacial transition zone in mortars by nanoindentation and scanning electron microscope. In: Magazine of Concrete Research, v. 70, n. 18 (September 2018).
- (2009): Effect of Concrete Composition on Interfacial Parameters Governing FRP Debonding from the Concrete Substrate. In: Advances in Structural Engineering, v. 12, n. 5 (October 2009).
- (2018): Behavior of ECC-encased CFST columns under axial compression. In: Engineering Structures, v. 171 (September 2018).
- (2018): Development of Multiscale Fiber-Reinforced Engineered Cementitious Composites with PVA Fiber and CaCO3 Whisker. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 6 (June 2018).
Structurae cooperates with
