Togay Ozbakkaloglu 
- (2024): Engineering properties of hybrid polymer composites produced with different unsaturated polyesters and hybrid epoxy. In: Journal of Building Engineering, v. 89 (July 2024).
- (2023): Effect of molding pressure and firing temperature on the properties of ceramics from natural zeolite. In: Construction and Building Materials, v. 402 (October 2023).
- (2023): Development of sustainable concrete using recycled polyethylene terephthalate (PET) granules as fine aggregate. In: Developments in the Built Environment, v. 15 (October 2023).
- (2023): The effect of marble powder on physico‐mechanical and microstructural properties of kaolin‐based geopolymer pastes. In: Structural Concrete, v. 24, n. 5 (October 2023).
- (2023): Engineering properties of structural lightweight concrete containing expanded shale and clay with high volume class F and class C fly ash. In: Structural Concrete, v. 24, n. 3 (April 2023).
- (2022): Durability properties of 3D printed concrete (3DPC). In: Automation in Construction, v. 142 (October 2022).
- (2022): The effect of limestone and bottom ash sand with recycled fine aggregate in foam concrete. In: Journal of Building Engineering, v. 54 (August 2022).
- (2022): The effect of curing regimes on physico-mechanical, microstructural and durability properties of alkali-activated materials: A review. In: Construction and Building Materials, v. 321 (February 2022).
- (2021): Enhancing the performance and environmental impact of alkali-activated binder-based composites containing graphene oxide and industrial by-products. In: Construction and Building Materials, v. 284 (May 2021).
- (2022): Effect of supplementary cementitious materials on properties of 3D printed conventional and alkali-activated concrete: A review. In: Automation in Construction, v. 138 (June 2022).
- (2021): Development of waste-based concretes containing foundry sand, recycled fine aggregate, ground granulated blast furnace slag and fly ash. In: Construction and Building Materials, v. 267 (January 2021).
- (2021): Dynamic Compressive Behavior of Concrete Confined with Unidirectional Natural Flax FRP Based on SHPB Tests. In: Composite Structures, v. 259 (March 2021).
- (2020): Electrochemical and statistical analyses of the combined effect of air-entraining admixture and micro-silica on corrosion of reinforced concrete. In: Construction and Building Materials, v. 262 (November 2020).
- (2019): Effect of thermal cycles on mechanical response of pultruded glass fiber reinforced polymer profiles of different geometries. In: Composite Structures, v. 223 (September 2019).
- (2017): Cyclic stress-strain model incorporating buckling effect for steel reinforcing bars embedded in FRP-confined concrete. In: Composite Structures, v. 182 (December 2017).
- (2020): Effect of polymer content and temperature on mechanical properties of lightweight polymer concrete. In: Construction and Building Materials, v. 260 (November 2020).
- (2021): Development of a waste‐based eco‐friendly structural mortar without Portland cement and natural sand. In: Structural Concrete, v. 22 (January 2021).
- (2020): Effects of nano-TiO2, nano-Al2O3, and nano-Fe2O3 on rheology, mechanical and durability properties of self-consolidating concrete (SCC): An experimental study. In: Construction and Building Materials, v. 245 (June 2020).
- (2020): Durability of concrete containing recycled concrete coarse and fine aggregates and milled waste glass in magnesium sulfate environment. In: Journal of Building Engineering, v. 29 (May 2020).
- (2020): Effect of concrete strength and longitudinal reinforcement arrangement on the performance of reinforced concrete beams strengthened using EBR and EBROG methods. In: Engineering Structures, v. 205 (February 2020).
- (2018): Effect of SnO 2 , ZrO 2 , and CaCO 3 nanoparticles on water transport and durability properties of self-compacting mortar containing fly ash: Experimental observations and ANFIS predictions. In: Construction and Building Materials, v. 158 (January 2018).
- (2020): Electrochemically produced graphene with ultra large particles enhances mechanical properties of Portland cement mortar. In: Construction and Building Materials, v. 234 (February 2020).
- (2016): Damage-Plasticity Model for FRP-Confined Normal-Strength and High-Strength Concrete. In: Journal of Composites for Construction, v. 20, n. 6 (December 2016).
- (2014): Confinement Model for FRP-Confined High-Strength Concrete. In: Journal of Composites for Construction, v. 18, n. 4 (August 2014).
- (2016): Evaluation of ultimate conditions of FRP-confined concrete columns using genetic programming. In: Computers & Structures, v. 162 (1 January 2016).
- (2014): Design model for FRP-confined normal- and high-strength concrete square and rectangular columns. In: Magazine of Concrete Research, v. 66, n. 20 (October 2014).
- (2017): Displacement-based model to predict lateral drift capacities of concrete-filled FRP tube columns. In: Engineering Structures, v. 147 (September 2017).
- (2016): Corner strengthening of square and rectangular concrete-filled FRP tubes. In: Engineering Structures, v. 117 (June 2016).
- (2007): Distributed Brillouin sensor for structural health monitoring. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 34, n. 3 (March 2007).
- (2018): A critical assessment of the compressive behavior of reinforced recycled aggregate concrete columns. In: Engineering Structures, v. 161 (April 2018).
Structurae cooperates with
