Jinping Ou 
- (2024): Factors influencing the wetting performance of asphalt emulsion on RAP surface. In: Construction and Building Materials, v. 449 (October 2024).
- (2024): Improved State-Space Approach Based on Lumped Mass Matrix for Transient Analysis of Large-Scale Locally Nonlinear Structures. In: Buildings, v. 14, n. 9 (25 August 2024).
- (2024): Grout sleeve splicing of steel-fiber reinforced polymer composite bars: Tensile behavior and bond mechanism. In: Construction and Building Materials, v. 425 (April 2024).
- (2024): Fatigue-Healing Performance Evaluation of Fiber-Modified Asphalt Mixture. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 1 (January 2024).
- (2024): Influence of negative temperature hardening on hydration, pore structure evolution and strength development of cement paste. In: Journal of Building Engineering, v. 83 (April 2024).
- (2023): Investigation on the wetting behavior of asphalt emulsion on aggregate for asphalt emulsion mixture. In: Construction and Building Materials, v. 400 (October 2023).
- (2023): Fatigue Life Evaluation of Parallel Steel-Wire Cables under the Combined Actions of Corrosion and Traffic Load. In: Structural Control and Health Monitoring, v. 2023 (February 2023).
- (2023): Large eddy simulation of turbulent atmospheric boundary layer flow based on a synthetic volume forcing method. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 233 (February 2023).
- (2022): GFRP bar-reinforced seawater sea-sand concrete beam under the combined influence of seawater exposure and sustained load: Durability and degradation mechanism. In: Structures, v. 43 (September 2022).
- (2021): Integrated Fatigue Life Evaluation Method for Members in Riveted Steel Truss Bridges. In: Journal of Performance of Constructed Facilities (ASCE), v. 35, n. 4 (August 2021).
- (2009): Guided wave propagation and spectral element method for debonding damage assessment in RC structures. In: Journal of Sound and Vibration, v. 324, n. 3-5 (July 2009).
- (2011): Investigation of vortex-induced vibration of a suspension bridge with two separated steel box girders based on field measurements. In: Engineering Structures, v. 33, n. 6 (June 2011).
- (2021): Interfacial design of nano-TiO2 modified fly ash-cement based low carbon composites. In: Construction and Building Materials, v. 270 (February 2021).
- (2020): Long-Term Monitoring Reliability and Life Prediction of Fiber Bragg Grating-Based Self-Sensing Steel Strands. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2011): Fractal Dimension-Based Damage Detection Method for Beams with a Uniform Cross-Section. FD-based damage detection method for beams. In: Computer-Aided Civil and Infrastructure Engineering, v. 26, n. 3 ( 2011).
- (2018): Improved Performance-Based Plastic Design for RC Moment Resisting Frames: Development and a Comparative Case Study. In: International Journal of Structural Stability and Dynamics, v. 18, n. 4 (March 2018).
- (2012): Fabrication of Piezoresistive CNT/CNF Cementitious Composites with Superplasticizer as Dispersant. In: Journal of Materials in Civil Engineering (ASCE), v. 24, n. 6 (June 2012).
- (2011): Hybrid active mass damper (AMD) vibration suppression of nonlinear high-rise structure using fuzzy logic control algorithm under earthquake excitations. In: Structural Control and Health Monitoring, v. 18, n. 6 (October 2011).
- (2013): In situ growth of carbon nanotubes/carbon nanofibers on cement/mineral admixture particles: A review. In: Construction and Building Materials, v. 49 (December 2013).
- (2015): Frequency-Domain Substructure Isolation for Local Damage Identification. In: Advances in Structural Engineering, v. 18, n. 1 (January 2015).
- (2013): Failure Patterns and Ultimate Load-Carrying Capacity Evolution of a Prestressed Concrete Cable-Stayed Bridge: Case Study. In: Advances in Structural Engineering, v. 16, n. 7 (July 2013).
- (2012): Investigation of Temperature Effects on Modal Parameters of the China National Aquatics Center. In: Advances in Structural Engineering, v. 15, n. 7 (July 2012).
- (2004): Load-Deflection Response of Concrete Beams Reinforced with FRP Bars. In: Advances in Structural Engineering, v. 7, n. 5 (October 2004).
- (2013): Global stability design method of buckling-restrained braces considering end bending moment transfer: Discussion on pinned connections with collars. In: Engineering Structures, v. 49 (April 2013).
- (2014): Local buckling behavior of steel angle core members in buckling-restrained braces: Cyclic tests, theoretical analysis, and design recommendations. In: Engineering Structures, v. 66 (May 2014).
- (2007): Investigation of vibration mitigation of stay cables incorporated with superelastic shape memory alloy dampers. In: Smart Materials and Structures, v. 16, n. 6 (December 2007).
- (2012): Flexural Demand on Pin-Connected Buckling-Restrained Braces and Design Recommendations. In: Journal of Structural Engineering (ASCE), v. 138, n. 11 (November 2012).
- (2017): Fast Warning Method for Rigid Hangers in a High-Speed Railway Arch Bridge Using Long-Term Monitoring Data. In: Journal of Performance of Constructed Facilities (ASCE), v. 31, n. 6 (December 2017).
- (2007): Investigation of the structural form optimization methods of high-rise buildings. In: Frontiers of Architecture and Civil Engineering in China, v. 1, n. 2 (May 2007).
- (2018): Linear-elastic lateral load analysis and seismic design of pin-supported wall-frame structures with yielding dampers. In: Earthquake Engineering and Structural Dynamics, v. 47, n. 4 (10 April 2018).
Structurae cooperates with
