Sang-Hoon Oh
- (2024): Experimental investigation on retrofitting effects of circular steel rod damper systems on non-seismic detailed reinforced concrete frames. In: Structures, v. 65 (July 2024).
- (2024): Energy-based seismic design method for seismically isolated structures with friction pendulum systems. In: Journal of Building Engineering, v. 92 (September 2024).
- (2016): 조립형 프리캐스트 콘크리트 보강재를 가지는 비좌굴가새의 이력특성 (Hysteresis Characteristics of Buckling Restrained Brace with Precast RC Restraining Elements). In: Journal of the Korea Institute for Structural Maintenance and Inspection (한국구조물진단유지관리공학회 논문집), v. 20, n. 1 (January 2016).
- (2014): 파괴모드를 고려한 비보강 조적벽체의 비선형 해석모델 (Nonlinear Analysis Model Considering Failure Mode of Unreinforced Masonry Wall). In: Journal of the Korea Institute for Structural Maintenance and Inspection (한국구조물진단유지관리공학회 논문집), v. 18, n. 4 (July 2014).
- (2013): 비내진상세를 가지는 철근콘크리트 기둥의 정량적 손상도 평가 기준 (Quantitative Damage Index of RC Columns with Non-seismic Details). In: Journal of the Korea Institute for Structural Maintenance and Inspection (한국구조물진단유지관리공학회 논문집), v. 17, n. 6 (November 2013).
- (2022): Experimental study on seismic performance of steel slit damper under additional tensile load. In: Journal of Building Engineering, v. 50 (June 2022).
- (2021): Effect of Torsion on Seismic Response of Single-Story Structures: an Energy-Based Design Approach (EBD). In: International Journal of Steel Structures, v. 21, n. 3 (26 May 2021).
- (2020): Experimental evaluation of the seismic performance of retrofitted masonry walls. In: Composite Structures, v. 240 (May 2020).
- (2021): Experimental verification of seismic performance of built-up beam-to-column connections with ductile detail. In: Journal of Constructional Steel Research, v. 176 (January 2021).
- (2020): Evaluation of the damage distribution of buildings considering the characteristics of far-fault long-period ground motions. In: Soil Dynamics and Earthquake Engineering, v. 133 (June 2020).
- (2020): Structural performance of beam system with T-stub type slit damper. In: Engineering Structures, v. 205 (February 2020).
- (2019): Design range of the damper of a T-stub damage-controlled system. In: Journal of Constructional Steel Research, v. 162 (November 2019).
- (2012): 고층 전단벽시스템 적용을 위한 직렬 연결형 강재이력댐퍼의 구조성능평가 (Structural Performance Evaluations of Steel Hysteretic Damper in Series for High-Rise Shear Wall System). In: Journal of Korean Society of Steel Construction (한국강구조학회 논문집), v. 24, n. 4 (August 2012).
- (2012): 건물의 내진보강을 위한 캔틸레버타입 강재댐퍼의 실험 (Experimental study on a Cantilever Type Metallic Damper for Seismic Retrofit of Building Structures). In: Journal of Korean Society of Steel Construction (한국강구조학회 논문집), v. 24, n. 2 (April 2012).
- (2019): Stability evaluation of the acceleration and energy response spectra. In: Soil Dynamics and Earthquake Engineering, v. 123 (August 2019).
- (2018): Distribution of Optimum Yield-Strength and Plastic Strain Energy Prediction of Hysteretic Dampers in Coupled Shear Wall Buildings. In: International Journal of Steel Structures, v. 18, n. 4 ( 2018).
- (2007): Effect of the moment transfer efficiency of a beam web on deformation capacity at box column-to-H beam connections. In: Journal of Constructional Steel Research, v. 63, n. 1 (January 2007).
- (2017): A proposal for a seismic design process for a passive control structural system based on the energy equilibrium equation. In: International Journal of Steel Structures, v. 17, n. 4 ( 2017).
- (2016): Shaking table test for evaluating the seismic response characteristics of concentrically braced steel structure with and without hysteretic dampers. In: International Journal of Steel Structures, v. 16, n. 1 ( 2016).
- (2016): A study to enhance the deformation capacity of beam-to-column connections using high strength steel having high yield ratio. In: International Journal of Steel Structures, v. 16, n. 1 ( 2016).
- (2016): Experimental study of using cantilever type steel plates for passive energy dissipation. In: International Journal of Steel Structures, v. 16, n. 3 ( 2016).
- (2012): Seismic response of base isolating systems with U-shaped hysteretic dampers. In: International Journal of Steel Structures, v. 12, n. 2 ( 2012).
- (2009): Experimental investigation of deck plate system with non-welding truss type deformed steel wires (tox deck plate slab). In: International Journal of Steel Structures, v. 9, n. 4 ( 2009).
- (2008): Evaluation of Rocking and Toe Crushing Failure of Unreinforced Masonry Walls. In: Advances in Structural Engineering, v. 11, n. 5 (October 2008).
- (2013): Experimental study of seismic performance of base-isolated frames with U-shaped hysteretic energy-dissipating devices. In: Engineering Structures, v. 56 (November 2013).
- (2009): Seismic performance of steel structures with slit dampers. In: Engineering Structures, v. 31, n. 9 (September 2009).
- (2004): Seismic behavior and retrofit of steel moment connections considering slab effects. In: Engineering Structures, v. 26, n. 13 (November 2004).
- (2007): Cyclic performance of existing moment connections in steel retrofitted with a reduced beam section and bottom flange reinforcements. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 34, n. 2 (February 2007).
- (2011): Seismic performance evaluation of moment resisting frames using high performance steel. In: International Journal of Steel Structures, v. 11, n. 2 ( 2011).
- (2018): Seismic Design of Coupled Shear Wall Building Linked by Hysteretic Dampers using Energy Based Seismic Design. In: International Journal of Steel Structures, v. 18, n. 1 ( 2018).
Structurae cooperates with
