Fujian Ni
- (2023): Comprehensive evaluation and data analysis of field pavement distress for epoxy asphalt pavement on steel bridge deck. In: Construction and Building Materials, v. 409 (December 2023).
- (2024): Cracking resistance performance of epoxy asphalt mixture collected from in-service steel bridge deck pavement: Multiscale testing and evaluation. In: Construction and Building Materials, v. 411 (January 2024).
- (2022): Characterizing the curing behavior and high-temperature performance of epoxy-resin modified asphalts. In: Construction and Building Materials, v. 353 (October 2022).
- (2022): Evaluating the storage stability of SBR-modified asphalt binder containing polyphosphoric acid (PPA). In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2022): Evaluating the thermal aging-induced raveling potential of thin friction course (TFC). In: Construction and Building Materials, v. 321 (February 2022).
- (2022): Evaluating the effects of styrene-butadiene rubber (SBR) and polyphosphoric acid (PPA) on asphalt adhesion performance. In: Construction and Building Materials, v. 321 (February 2022).
- (2009): Analysis on Stress of Pavement with Different Crack Statuses in Base. In: Journal of Highway and Transportation Research and Development (English Edition), v. 4, n. 1 (June 2009).
- (2009): Analysis of Mechanical Behavior of Pavement Slab Humping by High Temperature. In: Journal of Highway and Transportation Research and Development (English Edition), v. 4, n. 1 (June 2009).
- (2012): Atmospheric Temperature and Vehicle Loading Affect Rutting Formation in Asphalt Concrete Pavement. In: Journal of Highway and Transportation Research and Development (English Edition), v. 6, n. 3 (September 2012).
- (2021): 3D-Reconstruction and characterization of the pore microstructure within the asphalt FAM using the X-ray micro-computed tomography. In: Construction and Building Materials, v. 272 (February 2021).
- (2021): Effects of design parameters and moisture conditions on interface bond strength between thin friction course (TFC) and underlying asphalt pavements. In: Construction and Building Materials, v. 269 (February 2021).
- (2020): Correlation investigation of fatigue indices of fine aggregate matrix (FAM) and asphalt mixture containing reclaimed asphalt pavement materials. In: Construction and Building Materials, v. 262 (November 2020).
- (2021): Crack Resistance Evaluation for In-Service Asphalt Pavements by Using SCB Tests of Layer-Core Samples. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 1 (January 2021).
- (2020): Accuracy Improvement for Two-Dimensional Finite-Element Modeling while Considering Asphalt Mixture Meso-Structure Characteristics in Indirect Tensile Test Simulation. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 10 (October 2020).
- (2020): Effect of binder film distribution on the fatigue characteristics of asphalt Binder/Filler composite based on image analysis method. In: Construction and Building Materials, v. 260 (November 2020).
- (2020): Effect of cohesive and adhesive parameters on the moisture resistance of thin friction course (TFC) with varying mix design parameters. In: Construction and Building Materials, v. 258 (October 2020).
- (2020): Deep reinforcement learning for long‐term pavement maintenance planning. In: Computer-Aided Civil and Infrastructure Engineering, v. 35, n. 11 (16 October 2020).
- (2018): Characterization of permanent deformation performance of asphalt mixture by multi-sequenced repeated load test. In: Construction and Building Materials, v. 180 (August 2018).
- (2018): Characterization and identification of asphalt mixtures based on Convolutional Neural Network methods using X-ray scanning images. In: Construction and Building Materials, v. 174 (June 2018).
- (2019): Evaluation of aggregate packing based on thickness distribution of asphalt binder, mastic and mortar within asphalt mixtures using multiscale methods. In: Construction and Building Materials, v. 222 (October 2019).
- (2019): Comparison of the Hamburg, indirect tensile, and multi-sequenced repeated load tests for evaluation of HMA rutting resistance. In: Construction and Building Materials, v. 216 (August 2019).
- (2014): Evaluating the rutting resistance of asphalt mixtures using an advanced repeated load permanent deformation test under field conditions. In: Construction and Building Materials, v. 61 (June 2014).
- (2015): Characterization of air voids in cold in-place recycling mixtures using X-ray computed tomography. In: Construction and Building Materials, v. 84 (June 2015).
- (2015): Cause analysis on permanent deformation for asphalt pavements using field cores. In: Construction and Building Materials, v. 100 (December 2015).
- (2016): Evaluation of fatigue behavior in cold recycled mixture using digital image correlation method. In: Construction and Building Materials, v. 102 (January 2016).
- (2016): Developing an optional multiple repeated load test to evaluate permanent deformation of asphalt mixtures based on axle load spectrum. In: Construction and Building Materials, v. 122 (September 2016).
- (2017): Effect of the contact structure characteristics on rutting performance in asphalt mixtures using 2D imaging analysis. In: Construction and Building Materials, v. 136 (April 2017).
- (2013): Dynamic response of pavement under FWD using spectral element method. In: KSCE Journal of Civil Engineering, v. 18, n. 4 (November 2013).
- (2018): Development of Permanent Deformation Master Curves of Asphalt Mixtures by Load-Temperature Superposition. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 6 (June 2018).
- (2017): Characterization of Fatigue Damage of Hot Mix Asphalt Based on Residual Strength. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 8 (August 2017).
Structurae cooperates with
