Sanket Nayak 
- (2024): Evaluation of rheological properties of sustainable self-compacting recycled aggregate concrete produced by two-stage mixing approach. In: Journal of Building Engineering, v. 87 (June 2024).
- (2024): Seismic safety evaluation of coir and nylon fiber-reinforced masonry building models subjected to bi-axial shaking table test. In: Journal of Building Engineering, v. 85 (May 2024).
- (2023): Efficacy of high-volume fly ash and slag on the physicomechanical, durability, and analytical characteristics of high-strength mass concrete. In: Journal of Building Engineering, v. 76 (October 2023).
- (2023): Impact of slag‐fly ash cementitious system on thermal controls and durability of high‐strength mass concrete. In: Structural Concrete, v. 24, n. 5 (October 2023).
- (2023): Rheology of Concrete: Critical Review, recent Advancements, and future prospectives. In: Construction and Building Materials, v. 392 (August 2023).
- (2023): Exploring applicability of recycled nylon fiber reinforced mortar in joints and plaster to enhance the bond strength, in-plane and out-of-plane capacity of masonry structures. In: Journal of Building Engineering, v. 72 (August 2023).
- (2022): Efficacy of pond ash (PA) combined with ground granulated blast furnace slag (GGBFS) in producing cement-less mortar. In: Structures, v. 45 (November 2022).
- (2023): Agro-waste fiber reinforced mortar for augmenting the performance of masonry structures. In: Construction and Building Materials, v. 363 (January 2023).
- (2022): Improvement of shear capacity of RAC beams by adopting identical mortar volume method of mix-design along with dual-stage mixing approach. In: European Journal of Environmental and Civil Engineering, v. 27, n. 3 (May 2022).
- (2022): Efficacy of C&D waste in base/subbase layers of pavement – current trends and future prospectives: A systematic review. In: Construction and Building Materials, v. 340 (July 2022).
- (2021): Adjudging efficacy of geonet reinforcement on the seismic performance of brick masonry structures: an experimental study. In: Materials and Structures, v. 54, n. 6 (20 November 2021).
- (2021): Seismic performance enhancement of masonry building models strengthened with the cost-effective materials under bi-directional excitation. In: Engineering Structures, v. 242 (September 2021).
- (2020): Development of durable concrete from C&D waste by adopting identical mortar volume method in conjunction with two-stage mixing procedure. In: Construction and Building Materials, v. 256 (September 2020).
- (2020): Augmenting the seismic performance of masonry models using polypropylene band and steel wire mesh through shaking table testing. In: Structures, v. 26 (August 2020).
- (2020): Improving the In-Plane Behavior of Brick Masonry Wallet Using PP Band and Steel Wire Mesh. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 6 (June 2020).
- (2020): Shear and flexural behaviour of unreinforced masonry wallets with steel wire mesh. In: Journal of Building Engineering, v. 30 (July 2020).
- (2020): Microstructural investigation of recycled aggregate concrete produced by adopting equal mortar volume method along with two stage mixing approach. In: Structures, v. 24 (April 2020).
- (2020): Mix Design Method for Self-Compacting Recycled Aggregate Concrete and Its Microstructural Investigation by Considering Adhered Mortar in Aggregate. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 3 (March 2020).
- (2018): Sustainability on durability of self compacting concrete from C&D waste by improving porosity and hydrated compounds: A microstructural investigation. In: Construction and Building Materials, v. 174 (June 2018).
- (2015): 2011 Sikkim Earthquake at Eastern Himalayas: Lessons learnt from performance of structures. In: Soil Dynamics and Earthquake Engineering, v. 75 (August 2015).
- (2016): Gorkha (Nepal) earthquake of April 25, 2015: Actual damage, retrofitting measures and prediction by RVS for a few typical structures. In: Soil Dynamics and Earthquake Engineering, v. 89 (October 2016).
- (2019): Proposed mix design method for producing sustainable self compacting heat cured recycled aggregate concrete and its microstructural investigation. In: Construction and Building Materials, v. 218 (September 2019).
- (2019): EMV mix design method for preparing sustainable self compacting recycled aggregate concrete subjected to chloride environment. In: Construction and Building Materials, v. 199 (February 2019).
- (2017): A critical review and assessment for usage of recycled aggregate as sustainable construction material. In: Construction and Building Materials, v. 131 (January 2017).
- (2016): Improving Resistance of Masonry Structures to Tsunami Loading. In: Journal of The Institution of Engineers (India): Series A, v. 97, n. 2 (May 2016).
- (2019): Enhancing the flexural behaviour of masonry wallet using PP band and steel wire mesh. In: Construction and Building Materials, v. 194 (January 2019).
- (2014): Lateral period and seismic vulnerability of masonry buildings. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 167, n. 11 (November 2014).
- (2016): Failure of masonry structures in earthquake: A few simple cost effective techniques as possible solutions. In: Engineering Structures, v. 106 (January 2016).
- (2016): Improving Seismic Performance of Masonry Structures with Openings by Polypropylene Bands and L-Shaped Reinforcing Bars. In: Journal of Performance of Constructed Facilities (ASCE), v. 30, n. 2 (April 2016).
- (2019): Experimental and Field Performance of PP Band–Retrofitted Masonry: Evaluation of Seismic Behavior. In: Journal of Performance of Constructed Facilities (ASCE), v. 33, n. 1 (February 2019).
Structurae cooperates with
