Antonio Nanni 
- (2024): Lap splice assessment of GFRP rebars in reinforced concrete beams under flexure. In: Construction and Building Materials, v. 419 (March 2024).
- (2023): Nondestructive Testing (NDT) for Damage Detection in Concrete Elements with Externally Bonded Fiber-Reinforced Polymer. In: Buildings, v. 14, n. 1 (31 December 2023).
- (2023): Long-term field monitoring of slabs-on-ground reinforced with GFRP bars. In: Construction and Building Materials, v. 404 (November 2023).
- (2024): Load transfer of small-diameter GFRP and stainless steel doweled-joints in slabs-on-ground. In: Engineering Structures, v. 302 (March 2024).
- (2023): Optimizing Truss Structures Using Composite Materials under Natural Frequency Constraints with a New Hybrid Algorithm Based on Cuckoo Search and Stochastic Paint Optimizer (CSSPO). In: Buildings, v. 13, n. 6 (23 May 2023).
- (2023): Identifying NDT methods for damage detection in concrete elements reinforced or strengthened with FRP. In: Engineering Structures, v. 287 (July 2023).
- (2022): Life-Cycle Cost and Life-Cycle Assessment of a Monumental Fiber-Reinforced Polymer Reinforced Concrete Structure. In: Journal of Construction Engineering and Management, v. 148, n. 9 (September 2022).
- (1997): Modeling of bond behavior of hybrid rods for concrete reinforcement. In: Structural Engineering and Mechanics, v. 5, n. 4 (July 1997).
- (2017): Influence of width and thickness of composite laminates on the flexural behavior of reinforced concrete beams and slabs. In: Composite Structures, v. 178 (October 2017).
- (2011): Modeling of flexural behavior of RC beams strengthened with mechanically fastened FRP strips. In: Composite Structures, v. 93, n. 8 (July 2011).
- (2019): Life-Cycle Cost and Life-Cycle Assessment Analysis at the Design Stage of a Fiber-Reinforced Polymer-Reinforced Concrete Bridge in Florida. In: Advances in Civil Engineering Materials, v. 8, n. 2 (February 2019).
- (2019): Hydration, Strength, and Shrinkage of Cementitious Materials Mixed with Simulated Desalination Brine. In: Advances in Civil Engineering Materials, v. 8, n. 2 (February 2019).
- (2019): Hydration, Pore Solution, and Porosity of Cementitious Pastes Made with Seawater. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 8 (August 2019).
- (2006): NDT Monitoring of Bridges using Innovative High Precision Surveying System. Presented at: IABSE Symposium: Responding to Tomorrow's Challenges in Structural Engineering, Budapest, Hungary, 13-15 September 2006.
- (2011): Novel Test Method for Ultimate Hoop-Strain Characterization in FRP Jackets. In: Journal of Materials in Civil Engineering (ASCE), v. 23, n. 12 (December 2011).
- (1993): Laboratory Consolidation Methods Applied to Compacted Concrete for Pavements. In: Journal of Materials in Civil Engineering (ASCE), v. 5, n. 1 (February 1993).
- (2000): Local Bond-Slip Relationship for FRP Reinforcement in Concrete. In: Journal of Composites for Construction, v. 4, n. 1 (February 2000).
- (2017): GFRP Reinforcement in Concrete after 15 Years of Service. In: Journal of Composites for Construction, v. 21, n. 5 (October 2017).
- (2008): Monte Carlo Simulation of Shear Capacity of URM Walls Retrofitted by Polyurea Reinforced GFRP Grids. In: Journal of Composites for Construction, v. 12, n. 4 (August 2008).
- (2017): In-Plane Performance of Unreinforced Concrete Masonry Strengthened with Prestressed GFRP Bars. In: Journal of Composites for Construction, v. 21, n. 1 (February 2017).
- (2014): Out-of-Plane Behavior of URM Walls Strengthened with Fabric-Reinforced Cementitious Matrix Composite. In: Journal of Composites for Construction, v. 18, n. 4 (August 2014).
- (2009): Interaction diagram methodology for design of FRP-confined reinforced concrete columns. In: Construction and Building Materials, v. 23, n. 4 (April 2009).
- (2013): Incorporating Expected Life-Time into Live Load Factor for RC Structures Using Reliability Analysis. In: Advances in Structural Engineering, v. 16, n. 5 (May 2013).
- (2013): Numerical Approach to the Live Load Factor for RC Structures as a Function of Life-Time. In: Advances in Structural Engineering, v. 16, n. 11 (November 2013).
- (2017): A model for the bond-slip of a GFRP bar in concrete. In: Engineering Structures, v. 146 (September 2017).
- (2005): In Situ Load Testing of Parking Garage Reinforced Concrete Slabs: Comparison between 24 h and Cyclic Load Testing. In: Practice Periodical on Structural Design and Construction, v. 10, n. 1 (February 2005).
- (2014): In Situ Load Testing of a One-Way Reinforced Concrete Slab per the ACI 437 Standard. In: Journal of Performance of Constructed Facilities (ASCE), v. 28, n. 5 (October 2014).
- (2008): In-Situ Evaluation of Two Concrete Slab Systems. II: Evaluation Criteria and Outcomes. In: Journal of Performance of Constructed Facilities (ASCE), v. 22, n. 4 (August 2008).
- (2008): In-Situ Evaluation of Two Concrete Slab Systems. I: Load Determination and Loading Procedure. In: Journal of Performance of Constructed Facilities (ASCE), v. 22, n. 4 (August 2008).
- (2003): North American design guidelines for concrete reinforcement and strengthening using FRP: principles, applications and unresolved issues. In: Construction and Building Materials, v. 17, n. 6-7 (September 2003).
Structurae cooperates with
