0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

J. Toby Mottram

The following bibliography contains all publications indexed in this database that are linked with this name as either author, editor or any other kind of contributor.

  1. Qureshi, Jawed / Mottram, J. Toby (2013): Behaviour of pultruded beam-to-column joints using steel web cleats. In: Thin-Walled Structures, v. 73 (December 2013).

    https://doi.org/10.1016/j.tws.2013.06.019

  2. Mottram, J. Toby (1997): Design guidance for joints using polymeric composite materials. Presented at: International Conference: Composite Construction - Conventional and Innovative, Innsbruck, Austria, 16-18 September 1997.

    https://doi.org/10.5169/seals-987

  3. Wei, Xiaojun / Russell, Justin / Živanović, Stana / Mottram, J. Toby (2019): Measured dynamic properties for FRP footbridges and their critical comparison against structures made of conventional construction materials. In: Composite Structures, v. 223 (September 2019).

    https://doi.org/10.1016/j.compstruct.2019.110956

  4. Girão Coelho, Ana M. / Mottram, J. Toby / Harries, Kent A. (2015): Bolted connections of pultruded GFRP: Implications of geometric characteristics on net section failure. In: Composite Structures, v. 131 (November 2015).

    https://doi.org/10.1016/j.compstruct.2015.06.048

  5. Girão Coelho, Ana M. / Mottram, J. Toby / Harries, Kent A. (2015): Finite element guidelines for simulation of fibre-tension dominated failures in composite materials validated by case studies. In: Composite Structures, v. 126 (August 2015).

    https://doi.org/10.1016/j.compstruct.2015.02.071

  6. Mirmiran, Amir / Bank, Lawrence C. / Neale, Kenneth W. / Mottram, J. Toby / Ueda, Tamon / Davalos, Julio F. (2003): World Survey of Civil Engineering Programs on Fiber Reinforced Polymer Composites for Construction. In: Journal of Professional Issues in Engineering Education and Practice, v. 129, n. 3 (July 2003).

    https://doi.org/10.1061/(asce)1052-3928(2003)129:3(155)

  7. Girão Coelho, Ana M. / Mottram, J. Toby (2017): Numerical Evaluation of Pin-Bearing Strength for the Design of Bolted Connections of Pultruded FRP Material. In: Journal of Composites for Construction, v. 21, n. 5 (October 2017).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000809

  8. Boscato, Giosuè / Mottram, J. Toby / Russo, Salvatore (2011): Dynamic Response of a Sheet Pile of Fiber-Reinforced Polymer for Waterfront Barriers. In: Journal of Composites for Construction, v. 15, n. 6 (December 2011).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000231

  9. Qureshi, Jawed / Mottram, J. Toby (2014): Response of Beam-To-Column Web Cleated Joints For FRP Pultruded Members. In: Journal of Composites for Construction, v. 18, n. 2 (April 2014).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000392

  10. Wu, Chao / Bai, Yu / Mottram, J. Toby (2016): Effect of Elevated Temperatures on the Mechanical Performance of Pultruded FRP Joints with a Single Ordinary or Blind Bolt. In: Journal of Composites for Construction, v. 20, n. 2 (April 2016).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000608

  11. Boscato, Giosuè / Casalegno, Carlo / Russo, Salvatore / Mottram, J. Toby (2014): Buckling of Built-Up Columns of Pultruded Fiber-Reinforced Polymer C-Sections. In: Journal of Composites for Construction, v. 18, n. 4 (August 2014).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000453

  12. Pearson, Ian T. / Mottram, J. Toby (2013): A finite element modelling methodology for the non-linear stiffness evaluation of adhesively bonded single lap-joints: Part 2. Novel shell mesh to minimise analysis time. In: Computers & Structures, v. 114 (January 2013).

    https://doi.org/10.1016/j.compstruc.2011.10.006

  13. Pearson, Ian T. / Mottram, J. Toby (2013): A finite element modelling methodology for the non-linear stiffness evaluation of adhesively bonded single lap-joints: Part 1. Evaluation of key parameters. In: Computers & Structures, v. 114 (January 2013).

    https://doi.org/10.1016/j.compstruc.2011.10.005

  14. Qureshi, Jawed / Mottram, J. Toby (2015): Moment-rotation response of nominally pinned beam-to-column joints for frames of pultruded fibre reinforced polymer. In: Construction and Building Materials, v. 77 (February 2015).

    https://doi.org/10.1016/j.conbuildmat.2014.12.057

  15. Evernden, Mark C. / Mottram, J. Toby (2012): A case for houses to be constructed of fibre reinforced polymer components. In: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 165, n. 1 (February 2012).

    https://doi.org/10.1680/coma.2012.165.1.3

  16. Mottram, J. Toby / Zafari, Behrouz (2011): Pin-bearing strengths for bolted connections in fibre-reinforced polymer structures. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 164, n. 5 (October 2011).

    https://doi.org/10.1680/stbu.2011.164.5.291

  17. Qureshi, Jawed / Mottram, J. Toby / Zafari, Behrouz (2015): Robustness of simple joints in pultruded FRP frames. In: Structures, v. 3 (August 2015).

    https://doi.org/10.1016/j.istruc.2015.03.007

  18. Zafari, Behrouz / Qureshi, Jawed / Mottram, J. Toby / Rusev, Rusi (2016): Static and fatigue performance of resin injected bolts for a slip and fatigue resistant connection in FRP bridge engineering. In: Structures, v. 7 (August 2016).

    https://doi.org/10.1016/j.istruc.2016.05.004

  19. Živanović, Stana / Wei, Xiaojun / Russell, Justin / Mottram, J. Toby (2017): Vibration Performance of Two FRP Footbridge Structures in the United Kingdom. Presented at: Footbridge 2017 Berlin - Tell A Story, 6-8.9.2017, Technische Universität Berlin (TU Berlin).

    https://doi.org/10.24904/footbridge2017.09384

Search for a publication...

Only available with
My Structurae

Full text
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine