Davood Mostofinejad 
- (2024): Novel Cement-Free UHPC with High Gamma-Ray Resistance Using Calcium Oxide–Activated Slag, Iron and Barite Powders, and Steel Fibers. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 12 (December 2024).
- (2024): Hybrid rehabilitation of 3D RC beam-column joints using UHP-HFRC and FRP wrapping: Experimental evaluation and theoretical analysis. In: Journal of Building Engineering, v. 97 (November 2024).
- (2023): Improving thermal characteristics and energy absorption of concrete by recycled rubber and silica fume. In: Developments in the Built Environment, v. 16 (December 2023).
- (2024): Mechanical Properties and Impact Resistance of Concrete Pavement Containing Crumb Rubber. In: International Journal of Geomechanics, v. 24, n. 1 (January 2024).
- (2023): Improving the resistance of ultra-high-performance concrete against nuclear radiation: Replacing cement with barite, hematite, and lead powder. In: Developments in the Built Environment, v. 15 (October 2023).
- (2023): A novel development of HPC without cement: Mechanical properties and sustainability evaluation. In: Journal of Building Engineering, v. 76 (October 2023).
- (2023): Impacts of Conifer Leaves and Pine Ashes on Concrete Thermal Properties. In: Construction and Building Materials, v. 377 (May 2023).
- (2023): High volume of slag and PP fibres in engineered cementitious composites (ECC): Microstructure and mechanical properties. In: Magazine of Concrete Research, v. 75, n. 12 (June 2023).
- (2023): A new approach of ensemble learning in fully automated identification of structural modal parameters of concrete gravity dams: A case study of the Koyna dam. In: Structures, v. 50 (April 2023).
- (2023): A high‐strength concrete resistant to elevated temperatures using steel slag aggregates. In: Structural Concrete, v. 24, n. 3 (April 2023).
- (2022): Improving thermal and mechanical properties of concrete by using ceramic electrical insulator waste as aggregates. In: Construction and Building Materials, v. 338 (July 2022).
- (2021): Groove classification in EBROG FRP-to-concrete joints. In: Construction and Building Materials, v. 275 (March 2021).
- (2021): Mechanical properties of fiber-reinforced concrete containing waste porcelain aggregates under elevated temperatures. In: Construction and Building Materials, v. 289 (June 2021).
- (2022): Microstructure of ultra-high-performance concrete (UHPC) – A review study. In: Journal of Building Engineering, v. 50 (June 2022).
- (2022): An Investigation on Bacterial Air-Entrained Concrete Permeability using Statistical Modeling. In: Advances in Civil Engineering Materials, v. 11, n. 1 (11 January 2022).
- (2023): Improving retrofit of concrete columns with fibre strips using grooves and corner battens. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 176, n. 3 (March 2023).
- (2020): Investigating the effects of bacterial activity on compressive strength and durability of natural lightweight aggregate concrete reinforced with steel fibers. In: Construction and Building Materials, v. 251 (August 2020).
- (2020): An investigation into influence of physical and chemical surface modification of macro-polypropylene fibers on properties of cementitious composites. In: Construction and Building Materials, v. 244 (May 2020).
- (2021): Investigation of flexural performance of concrete reinforced with indented and fibrillated macro polypropylene fibers based on numerical and experimental comparison. In: Structural Concrete, v. 22, n. 1 (February 2021).
- (2020): Investigation of flexural and shear behaviors of biaxial voided slabs containing steel cages. In: Structural Concrete, v. 21, n. 1 (February 2020).
- (2019): Innovative warp and woof strap (WWS) method to anchor the FRP sheets in strengthened concrete beams. In: Construction and Building Materials, v. 218 (September 2019).
- (2011): Investigation of RC Beams Strengthened with Prestressed NSM CFRP Laminates. In: Journal of Composites for Construction, v. 15, n. 6 (December 2011).
- (2010): Grooving as Alternative Method of Surface Preparation to Postpone Debonding of FRP Laminates in Concrete Beams. In: Journal of Composites for Construction, v. 14, n. 6 (December 2010).
- (2019): Mix design of the green self-consolidating concrete: Incorporating the waste glass powder. In: Construction and Building Materials, v. 199 (February 2019).
- (2012): A new DEM-based method to predict packing density of coarse aggregates considering their grading and shapes. In: Construction and Building Materials, v. 35 (October 2012).
- (2016): Influence of different bonding and wrapping techniques on performance of beams strengthened in shear using CFRP reinforcement. In: Construction and Building Materials, v. 116 (July 2016).
- (2016): Influence of magnesium sulphate concentration on durability of concrete containing micro-silica, slag and limestone powder using durability index. In: Construction and Building Materials, v. 117 (August 2016).
- (2017): Implementing ANN to minimize sewage systems concrete corrosion with glass beads substitution. In: Construction and Building Materials, v. 138 (May 2017).
- (2018): Grooving methods in square RC columns strengthened with longitudinal CFRP under cyclic axial compression. In: Engineering Structures, v. 174 (November 2018).
- (2018): Investigating the effects of concrete compressive strength, CFRP thickness and groove depth on CFRP-concrete bond strength of EBROG joints. In: Construction and Building Materials, v. 189 (November 2018).
Structurae cooperates with
