0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

The following bibliography contains all publications indexed in this database that are linked with this name as either author, editor or any other kind of contributor.

  1. Lan, Haitao / Yan, Xuefeng / Moore, Ian D. (2024): Mud infiltration and travel paths during mud loss experiments on horizontal borehole stability. In: Tunnelling and Underground Space Technology, v. 144 (February 2024).

    https://doi.org/10.1016/j.tust.2023.105565

  2. Lan, Haitao / Moore, Ian D. (2022): Experimental investigation examining influence of pump rates on horizontal borehole stability in sand. In: Tunnelling and Underground Space Technology, v. 127 (September 2022).

    https://doi.org/10.1016/j.tust.2022.104608

  3. Lan, Haitao / Moore, Ian D. (2022): New design equation for maximum allowable mud pressure in sand during horizontal Directional drilling. In: Tunnelling and Underground Space Technology, v. 126 (August 2022).

    https://doi.org/10.1016/j.tust.2022.104543

  4. Wang, Dong / Moore, Ian D. / Hoult, Neil / Lan, Haitao (2022): Evaluation and comparison of different detection technologies on simulated voids near buried pipes. In: Tunnelling and Underground Space Technology, v. 123 (May 2022).

    https://doi.org/10.1016/j.tust.2022.104440

  5. Moore, Ian D. / Zhang, Chuntao (1998): Nonlinear Predictions for HDPE Pipe Response under Parallel Plate Loading. In: Journal of Transportation Engineering, v. 124, n. 3 (May 1998).

    https://doi.org/10.1061/(asce)0733-947x(1998)124:3(286)

  6. Dhar, Ashutosh S. / Moore, Ian D. (2006): Evaluation of Local Bending in Profile-Wall Polyethylene Pipes. In: Journal of Transportation Engineering, v. 132, n. 11 (November 2006).

    https://doi.org/10.1061/(asce)0733-947x(2006)132:11(898)

  7. Baumert, Michael E. / Allouche, Erez N. / Moore, Ian D. (2005): Drilling Fluid Considerations in Design of Engineered Horizontal Directional Drilling Installations. In: International Journal of Geomechanics, v. 5, n. 4 (December 2005).

    https://doi.org/10.1061/(asce)1532-3641(2005)5:4(339)

  8. Kennedy, Matthew J. / Moore, Ian D. / Skinner, Graeme D. (2006): Development of Tensile Hoop Stress during Horizontal Directional Drilling through Sand. In: International Journal of Geomechanics, v. 6, n. 5 (September 2006).

    https://doi.org/10.1061/(asce)1532-3641(2006)6:5(367)

  9. Lan, Haitao / Moore, Ian D. (2017): Numerical Investigation of the Circumferential Stresses around Boreholes during Horizontal Directional Drilling. In: International Journal of Geomechanics, v. 17, n. 12 (December 2017).

    https://doi.org/10.1061/(asce)gm.1943-5622.0001011

  10. Mai, Van Thien / Moore, Ian D. / Hoult, Neil A. (2021): Laboratory Investigation of the Structural Performance of a Corrugated Steel Culvert under Increasing Cover Depth. In: Journal of Bridge Engineering (ASCE), v. 26, n. 6 (June 2021).

    https://doi.org/10.1061/(asce)be.1943-5592.0001722

  11. Kearns, Oliver / Moore, Ian D. / Hoult, Neil A. (2020): Measured Responses of a Corrugated Steel Ellipse Culvert at Different Cover Depths. In: Journal of Bridge Engineering (ASCE), v. 25, n. 11 (November 2020).

    https://doi.org/10.1061/(asce)be.1943-5592.0001635

  12. Brown, Michael J. P. / Moore, Ian D. / Fam, Amir (2020): Analysis of a cured-in-place pressure pipe liner spanning circular voids. In: Tunnelling and Underground Space Technology, v. 101 (July 2020).

    https://doi.org/10.1016/j.tust.2020.103424

  13. Becerril García, David / Cortés-Pérez, Jacinto / Moore, Ian D. (2020): Modelling and parametric study of a gasketed bell and spigot joint in a buried high density polyethylene pipeline. In: Tunnelling and Underground Space Technology, v. 98 (April 2020).

    https://doi.org/10.1016/j.tust.2020.103325

  14. Purushothaman, N. / Moore, Ian D. (1990): Hysteresis Sliding Friction of Rubber—Finite Element Analysis. In: Journal of Engineering Mechanics (ASCE), v. 116, n. 1 (January 1990).

    https://doi.org/10.1061/(asce)0733-9399(1990)116:1(217)

  15. Moore, Ian D. (1985): Analytical Theory for Buried Tube Postbuckling. In: Journal of Engineering Mechanics (ASCE), v. 111, n. 7 (July 1985).

    https://doi.org/10.1061/(asce)0733-9399(1985)111:7(936)

  16. Ni, Pengpeng / Moore, Ian D. / Take, W. Andy (2018): Numerical modeling of normal fault-pipeline interaction and comparison with centrifuge tests. In: Soil Dynamics and Earthquake Engineering, v. 105 (February 2018).

    https://doi.org/10.1016/j.soildyn.2017.10.011

  17. Ampiah, Nancy / Fam, Amir / Moore, Ian D. (2010): Effect of Wrinkles on the Circumferential Strength of a Cast-in-Place Composite Polymer Liner Used in Retrofitting Pressure Pipes. In: Journal of Materials in Civil Engineering (ASCE), v. 22, n. 12 (December 2010).

    https://doi.org/10.1061/(asce)mt.1943-5533.0000160

  18. Almahakeri, Mohamed / Fam, Amir / Moore, Ian D. (2013): Longitudinal Bending and Failure of GFRP Pipes Buried in Dense Sand under Relative Ground Movement. In: Journal of Composites for Construction, v. 17, n. 5 (October 2013).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000340

  19. MacDougall, Katrina / Hoult, Neil A. / Moore, Ian D. (2016): Measured load capacity of buried reinforced concrete pipes. In: ACI Structural Journal, v. 113, n. 1 (January 2016).

    https://doi.org/10.14359/51688059

  20. Dhar, Ashutosh S. / Moore, Ian D. (2004): Laboratory Investigation of Local Bending in Profiled Thermoplastic Pipes. In: Advances in Structural Engineering, v. 7, n. 3 (July 2004).

    https://doi.org/10.1260/136943304323213166

  21. Trickey, Susan A. / Moore, Ian D. / Balkaya, Müge (2016): Parametric study of frost-induced bending moments in buried cast iron water pipes. In: Tunnelling and Underground Space Technology, v. 51 (January 2016).

    https://doi.org/10.1016/j.tust.2015.10.028

  22. Chehab, Abdul G. / Moore, Ian D. (2010): Parametric study examining the short and long term response of HDPE pipes when installed by horizontal directional drilling. In: Tunnelling and Underground Space Technology, v. 25, n. 6 (December 2010).

    https://doi.org/10.1016/j.tust.2010.06.002

  23. Law, T. C. Michael / Moore, Ian D. (2007): Numerical modeling of tight fitting flexible liner in damaged sewer under earth loads. In: Tunnelling and Underground Space Technology, v. 22, n. 5-6 (September 2007).

    https://doi.org/10.1016/j.tust.2006.11.006

  24. Moore, Ian D. / Hu, Fuping (1996): Linear viscoelastic modelling of profiled high density polyethylene pipe. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 23, n. 2 (April 1996).

    https://doi.org/10.1139/l96-044

  25. Abdel-Fattah, Mohamed T. / Moore, Ian D. / Abdel-Fattah, Tarek T. (2006): Behaviour of elevated concrete silos filled with saturated solids. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 33, n. 3 (March 2006).

    https://doi.org/10.1139/l05-108

  26. Sheldon, Timothy / Sezen, Halil / Moore, Ian D. (2016): Beam-on-Springs Modeling of Jointed Pipe Culverts. In: Journal of Performance of Constructed Facilities (ASCE), v. 30, n. 2 (April 2016).

    https://doi.org/10.1061/(asce)cf.1943-5509.0000729

  27. Sheldon, Timothy / Sezen, Halil / Moore, Ian D. (2015): Joint Response of Existing Pipe Culverts under Surface Live Loads. In: Journal of Performance of Constructed Facilities (ASCE), v. 29, n. 1 (February 2015).

    https://doi.org/10.1061/(asce)cf.1943-5509.0000494

  28. Michael Law, T. C. / Moore, Ian D. (2007): Installed Geometry of Cast-in-Place Polymer Sewer Liners. In: Journal of Performance of Constructed Facilities (ASCE), v. 21, n. 2 (April 2007).

    https://doi.org/10.1061/(asce)0887-3828(2007)21:2(172)

  29. Regier, Caleb / Hoult, Neil A. / Moore, Ian D. (2017): Laboratory Study on the Behavior of a Horizontal-Ellipse Culvert during Service and Ultimate Load Testing. In: Journal of Bridge Engineering (ASCE), v. 22, n. 3 (March 2017).

    https://doi.org/10.1061/(asce)be.1943-5592.0001016

  30. Peter, Jane M. / Chapman, David / Moore, Ian D. / Hoult, Neil (2018): Impact of soil erosion voids on reinforced concrete pipe responses to surface loads. In: Tunnelling and Underground Space Technology, v. 82 (December 2018).

    https://doi.org/10.1016/j.tust.2018.08.003

Search for a publication...

Only available with
My Structurae

Full text
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine