Rosario Montuori 
- (2024): Finite element analysis of concrete filled steel tubes subjected to cyclic bending. In: Engineering Structures, v. 314 (September 2024).
- (2024): Advanced seismic retrofitting with high-mass-ratio Tuned Mass Dampers. In: Soil Dynamics and Earthquake Engineering, v. 179 (April 2024).
- (2024): Experimental and analytical study on the behaviour of circular concrete filled steel tubes in cyclic bending. In: Engineering Structures, v. 304 (April 2024).
- (2024): Experimental programme on austenitic stainless steel RHS members subjected to monotonic and cyclic bending. In: Engineering Structures, v. 302 (March 2024).
- (2023): The effect of the gravity column in the seismic design of steel CBFs. In: Structures, v. 57 (November 2023).
- (2023): Design procedure for failure mode control of linked column frames. In: Engineering Structures, v. 296 (December 2023).
- (2023): Design and seismic evaluation of MRFs in DC2 ductility class introduced in the new prEN1998 draft and comparison with TPMC. In: Soil Dynamics and Earthquake Engineering, v. 168 (May 2023).
- (2023): Critical discussion of DC2 design rules for MR-Frames in the framework of the prEN1998 draft. In: Procedia Structural Integrity, v. 44 ( 2023).
- (2022): Performance-based rules for the simplified assessment of steel CBFs. In: Journal of Constructional Steel Research, v. 191 (April 2022).
- (2021): The Influence of the Material Properties on the Ultimate Behaviour of Aluminium H-shaped Beams. In: The Open Construction and Building Technology Journal, v. 15, n. 1 (18 March 2021).
- (2021): Modelling non-linear behaviur of aluminium alloy gusset joints for single layer lattices domes. In: Structures, v. 34 (December 2021).
- (2021): Experimental validation of a theoretical model accounting for floor joists contribution on the flexural resistance of beam-column joints in R. C. frames. In: Engineering Structures, v. 247 (November 2021).
- (2021): The influence of the axial restraint on the overstrength of short links. In: Journal of Constructional Steel Research, v. 184 (September 2021).
- (2021): Influence of the seismic shear proportioning factor on steel MRFs seismic performances. In: Soil Dynamics and Earthquake Engineering, v. 141 (February 2021).
- (2017): Globally stable tensegrity compressive structures for arbitrary complexity. In: Composite Structures, v. 179 (November 2017).
- (2016): Globally stable minimal mass compressive tensegrity structures. In: Composite Structures, v. 141 (May 2016).
- (2010): Failure Mode and Drift Control of MRF-CBF Dual Systems. In: The Open Construction and Building Technology Journal, v. 4, n. 1 (November 2010).
- (2010): Failure Mode and Drift Control of MRF-CBF Dual Systems. In: The Open Construction and Building Technology Journal, v. 4, n. 1 (November 2010).
- (2015): Analysis and modelling of CFT members: Moment curvature analysis. In: Thin-Walled Structures, v. 86 (January 2015).
- (2018): Comparison Between Different Design Strategies For Freedam Frames: Push-Overs and Ida Analyses. In: The Open Construction and Building Technology Journal, v. 12, n. 1 (December 2018).
- (2019): An Optimal Seismic Force Pattern for Uniform Drift Distribution. In: Buildings, v. 9, n. 11 (31 October 2019).
- (2019): Consideration of second-order effects on plastic design of steel moment resisting frames. In: Bulletin of Earthquake Engineering, v. 17, n. 6 (April 2019).
- (2019): The effect of floor joists on the elastic and inelastic behavior of R.C frames. In: Engineering Structures, v. 196 (October 2019).
- (2010): Plastic design of CB-frames with reduced section solution for bracing members. In: Journal of Constructional Steel Research, v. 66, n. 5 (May 2010).
- (2015): Advances in theory of plastic mechanism control: closed form solution for MR-Frames. In: Earthquake Engineering and Structural Dynamics, v. 44, n. 7 (June 2015).
- (2016): Moment frames – concentrically braced frames dual systems: analysis of different design criteria. In: Structure and Infrastructure Engineering, v. 12, n. 1 (January 2016).
- (2016): A general design procedure for failure mechanism control of reinforced concrete frames. In: Engineering Structures, v. 118 (July 2016).
- (2017): Influence of connection typology on seismic response of MR-Frames with and without 'set-backs'. In: Earthquake Engineering and Structural Dynamics, v. 46, n. 1 (January 2017).
- (2018): Critical analysis of ultimate rotation formula for R.C. columns subjected to cyclic loadings. In: Engineering Structures, v. 177 (December 2018).
- (2019): Partial safety factors and overstrength coefficient evaluation for the design of connections equipped with friction dampers. In: Engineering Structures, v. 178 (January 2019).
Structurae cooperates with
