Kim Hung Mo 
- (2024): Performance of high-strength green strain-hardening cementitious composites incorporating CSA/CAC cements and GGBS. In: Structures, v. 67 (September 2024).
- (2024): Modification of gypsum composite binder via introduction of ground granulated blast furnace slag and waterproofing agent. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Investigation of machine learning models in predicting compressive strength for ultra-high-performance geopolymer concrete: A comparative study. In: Construction and Building Materials, v. 436 (July 2024).
- (2023): Municipal woody biomass waste ash-based cold-bonded artificial lightweight aggregate produced by one-part alkali-activation method. In: Construction and Building Materials, v. 394 (August 2023).
- (2023): Lightweight cementitious composites incorporating fly ash cenospheres and perlite microspheres. In: Construction and Building Materials, v. 404 (November 2023).
- (2023): Inherent characteristics of agro and industrial By-Products based lightweight concrete – A comprehensive review. In: Construction and Building Materials, v. 397 (September 2023).
- (2024): Interaction of various parameters on the properties of semi-dry gypsum-based blocks produced by compression forming method. In: Construction and Building Materials, v. 411 (January 2024).
- (2023): Hybrid Nucleation Acceleration Method with Calcium Carbonate and Calcium Silicate Hydrate for Fast-Track Construction. In: Buildings, v. 13, n. 12 (22 November 2023).
- (2023): An Overview of the Utilization of Common Waste as an Alternative Fuel in the Cement Industry. In: Advances in Civil Engineering, v. 2023 (February 2023).
- (2023): Influence of calcination and GGBS addition in preparing β-hemihydrate synthetic gypsum from phosphogypsum. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2023): Performance of reinforced concrete flat slab strengthened with CFRP for punching shear. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2023): Influences of w/c and CO2 curing duration on the high temperature properties of cement pastes. In: Journal of Building Engineering, v. 69 (June 2023).
- (2022): Insulating foamed lightweight cementitious composite with co-addition of micro-sized aerogel and hydrogen peroxide. In: Construction and Building Materials, v. 360 (December 2022).
- (2022): Mechanical strength, water resistance and drying shrinkage of lightweight hemihydrate phosphogypsum-cement composite with ground granulated blast furnace slag and recycled waste glass. In: Construction and Building Materials, v. 345 (August 2022).
- (2022): Meta-Analysis of the Performance of Pervious Concrete with Cement and Aggregate Replacements. In: Buildings, v. 12, n. 4 (11 April 2022).
- (2021): Incorporation of crumb rubber and air-entraining agent in ultra-lightweight cementitious composite: Evaluation of mechanical and acoustic properties. In: Journal of Building Engineering, v. 42 (October 2021).
- (2021): Performance of mechanical steel bar splices using grouted couplers under uniaxial tension. In: Journal of Building Engineering, v. 34 (February 2021).
- (2020): Mechanical strength and permeation properties of high calcium fly ash-based geopolymer containing recycled brick powder. In: Journal of Building Engineering, v. 32 (November 2020).
- (2020): The Influence of Powdered Crumb Rubber on the Mechanical Properties and Thermal Performance of Lightweight Foamed Concrete. In: IOP Conference Series: Materials Science and Engineering, v. 739 (February 2020).
- (2020): Hydraulic and strength characteristics of pervious concrete containing a high volume of construction and demolition waste as aggregates. In: Construction and Building Materials, v. 253 (August 2020).
- (2020): Mechanical properties and drying shrinkage of lightweight cementitious composite incorporating perlite microspheres and polypropylene fibers. In: Construction and Building Materials, v. 246 (June 2020).
- (2018): Incorporation of expanded vermiculite lightweight aggregate in cement mortar. In: Construction and Building Materials, v. 179 (August 2018).
- (2019): Microstructural and Strength Characteristics of High-Strength Mortar Using Nontraditional Supplementary Cementitious Materials. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 4 (April 2019).
- (2014): Impact resistance of hybrid fibre-reinforced oil palm shell concrete. In: Construction and Building Materials, v. 50 (January 2014).
- (2015): Influence of lightweight aggregate on the bond properties of concrete with various strength grades. In: Construction and Building Materials, v. 84 (June 2015).
- (2016): Microstructural investigations of palm oil fuel ash and fly ash based binders in lightweight aggregate foamed geopolymer concrete. In: Construction and Building Materials, v. 120 (September 2016).
- (2017): Overview of supplementary cementitious materials usage in lightweight aggregate concrete. In: Construction and Building Materials, v. 139 (May 2017).
- (2017): Mechanical strength and durability performance of autoclaved lime-saline soil brick. In: Construction and Building Materials, v. 146 (August 2017).
- (2017): Incorporation of nano-materials in cement composite and geopolymer based paste and mortar – A review. In: Construction and Building Materials, v. 148 (September 2017).
- (2017): Mechanical, toughness, bond and durability-related properties of lightweight concrete reinforced with steel fibres. In: Materials and Structures, v. 50, n. 1 (February 2017).
Structurae cooperates with
