Taito Miura 
- (2024): New insight on the thermal impact on cementitious materials due to high-temperature with water supply: Continuous expansive spalling in water. In: Case Studies in Construction Materials, v. 21 (December 2024).
- (2023): Development of elastic and plastic strains in concrete damaged by alkali–silica reaction during various compression loading tests. In: Construction and Building Materials, v. 393 (August 2023).
- (2023): Experimental study on the effect of different shear reinforcement shapes and arrangement on 3D crack propagation and shear failure mechanism in RC beams. In: Structures, v. 58 (December 2023).
- (2023): Influence of Reinforcing Rebar on Expansion due to Delayed Ettringite Formation along the Bonding Length – Part I: The Role of Bond on Expansive Behavior of Concrete. In: Journal of Advanced Concrete Technology, v. 21, n. 11 (18 November 2023).
- (2023): Influence of Reinforcing Rebar on Expansion due to Delayed Ettringite Formation along the Bonding Length – Part II: Bond Performance of Reinforced Concrete Affected by DEF Expansion. In: Journal of Advanced Concrete Technology, v. 21, n. 11 (18 November 2023).
- (2023): A Review of Numerical Models for the Performance Assessment of Concrete Structures Affected by Alkali-Silica Reaction. In: Journal of Advanced Concrete Technology, v. 21, n. 8 (22 August 2023).
- (2022): Numerical evaluation of the perfobond (PBL) shear connector with transverse rebar using coupled rigid Body spring model (RBSM) and solid finite element method (FEM). In: Structures, v. 45 (November 2022).
- (2022): A numerical study on the influence of rebar cut-off on the shear performance of RC beam by using rigid-body-spring-method. In: Structures, v. 40 (June 2022).
- (2021): Numerical Evaluation of Shear Strength Degradation Mechanism Dependent on the Size Increase of RC Deep Beams with Height up to 1.5 Meter by Using 3D Rigid-Body-Spring-Method. In: Journal of Advanced Concrete Technology, v. 19, n. 12 (16 December 2021).
- (2022): Evaluation of failure mechanism in lap splices and role of stirrup confinement using 3D RBSM. In: Engineering Structures, v. 252 (February 2022).
- (2021): Influence of primary cracks on static and fatigue compressive behavior of concrete under water. In: Construction and Building Materials, v. 305 (October 2021).
- (2021): Experimental study on bond behavior of corroded rebars coated by anti-corrosive materials in polymer cement mortar. In: Construction and Building Materials, v. 300 (September 2021).
- (2021): Analytical Study on the Effect of Different Shear Reinforcement Shapes on Shear Failure Behavior and Shear Resistance Mechanism of RCBeams. In: Journal of Advanced Concrete Technology, v. 19, n. 6 (2 June 2021).
- (2021): Experimental Study on the Effect of Different Shear Reinforcement Shapes on Shear Failure Behavior and Internal Crack Pattern of RC Beams. In: Journal of Advanced Concrete Technology, v. 19, n. 1 (7 January 2021).
- (2021): Experimental study on the effect of anti-corrosive coatings on bond behavior of corroded rebar. In: Construction and Building Materials, v. 274 (March 2021).
- (2020): Impact of origination of expansion on three-dimensional expansion crack propagation process due to DEF evaluated by mesoscale discrete model. In: Construction and Building Materials, v. 260 (November 2020).
- (2020): Effect of Various Structural Factors on Shear Strength Degradation after Yielding of RC Members under Cyclic Loads. In: Journal of Advanced Concrete Technology, v. 18, n. 4 (15 April 2020).
- (2020): Numerical simulation of bond degradation subjected to corrosion-induced crack by simplified rebar and interface model using RBSM. In: Construction and Building Materials, v. 247 (June 2020).
- (2020): High temperature influence on concrete produced by spherical shaped EAF slag fine aggregate – Physical and mechanical properties. In: Construction and Building Materials, v. 231 (January 2020).
- (2019): Effect of corrosion‐induced crack and corroded rebar shape on bond behavior. In: Structural Concrete, v. 20, n. 6 (December 2019).
- (2018): Numerical evaluation of localization and softening behavior of concrete confined by steel tubes. In: Structural Concrete, v. 19, n. 6 (December 2018).
- (2019): Investigation on material stability of spherical shaped EAF slag fine aggregate concrete for pavement during thermal change. In: Construction and Building Materials, v. 215 (August 2019).
- (2016): Crack patterns of concrete with a single rebar subjected to non-uniform and localized corrosion. In: Construction and Building Materials, v. 116 (July 2016).
- (2017): Feedback System of Ion Transfer through Cracks During Deterioration of Mortar Due to Sulfate Attack Evaluated by RBSM-Truss Network Model. In: Journal of Advanced Concrete Technology, v. 15, n. 10 ( 2017).
- (2017): Investigation of Influence of Section Pre-crack on Shear Strength and Shear Resistance Mechanism of RC Beams by Experiment and 3-D RBSM Analysis. In: Journal of Advanced Concrete Technology, v. 15, n. 11 ( 2017).
- (2015): Evaluation Method of Tensile Behavior of Corroded Reinforcing Bars Considering Radius Loss. In: Journal of Advanced Concrete Technology, v. 13, n. 3 ( 2015).
- (2016): Modeling of Corrosion-Induced Damage in Reinforced Concrete Considering Electro-Mechanical Coupling. In: Journal of Advanced Concrete Technology, v. 14, n. 11 ( 2016).
- (2018): Investigation on applicability of spherical shaped EAF slag fine aggregate in pavement concrete – Fundamental and durability properties. In: Construction and Building Materials, v. 192 (December 2018).
- (2018): Development of simulation method of concrete cracking behavior and corrosion products movement due to rebar corrosion. In: Construction and Building Materials, v. 190 (November 2018).
- (2017): Mechanism of shear strength degradation of a reinforced concrete column subjected to cyclic loading. In: Structural Concrete, v. 18, n. 1 (February 2017).
Structurae cooperates with
