Jahangir Mirza
- (2024): Evaluation of high-volume fly-ash cementitious binders incorporating nanosilica as eco-friendly sustainable concrete repair materials. In: Construction and Building Materials, v. 447 (October 2024).
- (2023): Physico-Antibacterial Feature and SEM Morphology of Bio-Hydraulic Lime Mortars Incorporating Nano-Graphene Oxide and Binary Combination of Nano-Graphene Oxide with Nano Silver, Fly Ash, Zinc, and Titanium Powders. In: Buildings, v. 13, n. 1 (13 January 2023).
- (2022): Mechanical, thermal, durability and microstructural behavior of hybrid waste-modified green reactive powder concrete. In: Construction and Building Materials, v. 344 (August 2022).
- (2018): Impact of curing temperatures and alkaline activators on compressive strength and porosity of ternary blended geopolymer mortars. In: Case Studies in Construction Materials, v. 9 (December 2018).
- (2021): Durability performance of modified concrete incorporating fly ash and effective microorganism. In: Construction and Building Materials, v. 267 (January 2021).
- (2020): Enhanced performance of nano-palm oil ash-based green mortar against sulphate environment. In: Journal of Building Engineering, v. 32 (November 2020).
- (2018): Effects of POFA replaced with FA on durability properties of GBFS included alkali activated mortars. In: Construction and Building Materials, v. 175 (June 2018).
- (2018): Effects of nanocharcoal coconut-shell ash on the physical and rheological properties of bitumen. In: Construction and Building Materials, v. 158 (January 2018).
- (2020): Effects of ceramic tile powder waste on properties of self-compacted alkali-activated concrete. In: Construction and Building Materials, v. 236 (March 2020).
- (2020): Coal bottom ash as sand replacement in concrete: A review. In: Construction and Building Materials, v. 236 (March 2020).
- (2014): Joint Seals for Hydraulic Structures in Severe Climates. In: Journal of Civil Engineering and Management, v. 20, n. 1 (March 2014).
- (2019): Properties of ceramic tile waste based alkali-activated mortars incorporating GBFS and fly ash. In: Construction and Building Materials, v. 214 (July 2019).
- (2019): Microstructure and physical properties of nano charcoal ash as binder. In: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 172, n. 2 (April 2019).
- (2019): Evaluation of alkali-activated mortars containing high volume waste ceramic powder and fly ash replacing GBFS. In: Construction and Building Materials, v. 210 (June 2019).
- (2016): Chloride penetration of RHA concrete under marine environment. In: Proceedings of the Institution of Civil Engineers - Maritime Engineering, v. 169, n. 2 (June 2016).
- (2013): In situ performance of field-moulded joint sealants in dams. In: Construction and Building Materials, v. 41 (April 2013).
- (2013): Properties of microfine cement grouts at 4°C, 10°C and 20°C. In: Construction and Building Materials, v. 47 (October 2013).
- (2014): Preferred test methods to select suitable surface repair materials in severe climates. In: Construction and Building Materials, v. 50 (January 2014).
- (2014): Flow characteristics of ternary blended self-consolidating cement mortars incorporating palm oil fuel ash and pulverised burnt clay. In: Construction and Building Materials, v. 64 (August 2014).
- (2016): Palm oil fuel ash as potential green micro-filler in polymer concrete. In: Construction and Building Materials, v. 102 (January 2016).
- (2016): Investigation of coal bottom ash and fly ash in concrete as replacement for sand and cement. In: Construction and Building Materials, v. 116 (July 2016).
- (2016): Optimum concentration of Bacillus megaterium for strengthening structural concrete. In: Construction and Building Materials, v. 118 (August 2016).
- (2016): Evaluation of iron ore tailings as replacement for fine aggregate in concrete. In: Construction and Building Materials, v. 120 (September 2016).
- (2016): Influence of different curing temperatures and alkali activators on properties of GBFS geopolymer mortars containing fly ash and palm-oil fuel ash. In: Construction and Building Materials, v. 125 (October 2016).
- (2016): Properties of sustainable lightweight pervious concrete containing oil palm kernel shell as coarse aggregate. In: Construction and Building Materials, v. 126 (November 2016).
- (2019): Properties of high strength palm oil clinker lightweight concrete containing palm oil fuel ash in tropical climate. In: Construction and Building Materials, v. 199 (February 2019).
- (2017): Effects of mixture design variables on rubber–bitumen interaction: properties of dry mixed rubberized asphalt mixture. In: Materials and Structures, v. 50, n. 1 (February 2017).
- (2011): Evaluation of surface sealers for concrete hydraulic structures exposed to low temperatures. In: Materials and Structures, v. 44, n. 1 (January 2011).
- (2006): Performance of waterstops at different temperatures. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 33, n. 6 (June 2006).
- (2008): Performance of Pakistani volcanic ashes in mortars and concrete. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 35, n. 12 (December 2008).
Structurae cooperates with
