0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

Pedro F. Miguel

The following bibliography contains all publications indexed in this database that are linked with this name as either author, editor or any other kind of contributor.

  1. Traver-Abella, Celia / Bonet, José L. / Miguel, Pedro F. / Albiol-Ibáñez, José Ramón (2024): Effect of steel fibres on the shear behaviour of SCC dry joints in precast segmental bridges. In: Construction and Building Materials, v. 415 (February 2024).

    https://doi.org/10.1016/j.conbuildmat.2024.134998

  2. Traver-Abella, Celia / Bonet, José L. / Miguel, Pedro F. / Fernández-Prada, Miguel Ángel (2024): Shear strength of self-compacting concrete dry joints subjected to combined axial, bending and shear forces in precast concrete segmental bridges. In: Engineering Structures, v. 303 (March 2024).

    https://doi.org/10.1016/j.engstruct.2024.117495

  3. Traver, Celia / Ruiz-Pinilla, Joaquín G. / Monserrrat, Andrea / Montoya-Coronado, Luis A. / Miguel, Pedro F. / Ribas, Carlos / Cladera, Antoni / Bonet, José L. (2023): Feasibility of iron-based shape memory alloy strips for shear strengthening of damaged RC beams promoting the formation of plastic hinges. In: Construction and Building Materials, v. 401 (October 2023).

    https://doi.org/10.1016/j.conbuildmat.2023.132906

  4. Miguel, Pedro F. / Fernández, Miguel A. / Hegger, Josef / Schmidt, Maximilian: Shear Resistance of Members Without Shear Reinforcement in Presence of Axial Forces in the Next Eurocode 2. In: Hormigón y acero.

    https://doi.org/10.33586/hya.2023.3112

  5. Mata-Falcón, Jaime / Pallarés, Luis / Miguel, Pedro F. (2019): Proposal and experimental validation of simplified strut-and-tie models on dapped-end beams. In: Engineering Structures, v. 183 (March 2019).

    https://doi.org/10.1016/j.engstruct.2019.01.010

  6. Romero, Manuel L. / Miguel, Pedro F. / Cano, Juan J. (2002): A parallel procedure for nonlinear analysis of reinforced concrete three-dimensional frames. In: Computers & Structures, v. 80, n. 16-17 (July 2002).

    https://doi.org/10.1016/s0045-7949(02)00091-3

  7. Miguel, Pedro F. / Navarro-Gregori, Juan / Fernandez-Prada, Miguel A. / Bonet, José L. (2013): A simplified method to predict the ultimate shear stress of reinforced concrete membrane elements. In: Engineering Structures, v. 49 (April 2013).

    https://doi.org/10.1016/j.engstruct.2012.11.009

  8. Leite, L. / Bonet, J. L. / Pallarés, L. / Miguel, Pedro F. / Fernandez-Prada, Miguel A. (2013): Experimental research on high strength concrete slender columns subjected to compression and uniaxial bending with unequal eccentricities at the ends. In: Engineering Structures, v. 48 (March 2013).

    https://doi.org/10.1016/j.engstruct.2012.07.039

  9. Pallarés, L. / Miguel, Pedro F. / Fernandez-Prada, Miguel A. (2009): A numerical method to design reinforced concrete sections subjected to axial forces and biaxial bending based on ultimate strain limits. In: Engineering Structures, v. 31, n. 12 (December 2009).

    https://doi.org/10.1016/j.engstruct.2009.08.006

  10. Leite, L. / Bonet, J. L. / Pallarés, L. / Miguel, Pedro F. / Fernandez-Prada, Miguel A. (2012): Behavior of RC slender columns under unequal eccentricities and skew angle loads at the ends. In: Engineering Structures, v. 40 (July 2012).

    https://doi.org/10.1016/j.engstruct.2012.02.017

  11. Leite, Luiz C. / Bonet, José L. / Pallarés, Luis / Miguel, Pedro F. (2014): Cm-factor for RC slender columns under unequal eccentricities and skew angle loads at the ends. In: Engineering Structures, v. 71 (July 2014).

    https://doi.org/10.1016/j.engstruct.2014.04.020

  12. Meléndez, Carlos / Miguel, Pedro F. / Pallarés, Luis (2016): A simplified approach for the ultimate limit state analysis of three-dimensional reinforced concrete elements. In: Engineering Structures, v. 123 (September 2016).

    https://doi.org/10.1016/j.engstruct.2016.05.039

Search for a publication...

Only available with
My Structurae

Full text
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine