Kasım Mermerdaş 
- (2024): Effect of Aggregate Type and Size on the Fresh Properties of Self-Consolidating Geopolymer Concrete. In: International Journal of Civil Engineering, v. 22, n. 10 (May 2024).
- (2023): Effect of different types of calcined crude kaolins and high purity metakaolin on corrosion resistance of reinforcement in concretes: Experimental evaluation and analytical modeling. In: Construction and Building Materials, v. 382 (June 2023).
- (2023): Effect of Waste Tire Aggregate on Thermal and Strength Characteristics of Fly Ash–Based Geopolymer Composites Produced at Various Binder Contents. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 10 (October 2023).
- (2022): Engineering properties and SEM analysis of eco-friendly geopolymer mortar produced with crumb rubber. In: Journal of Sustainable Construction Materials and Technologies, v. 7, n. 2 (28 June 2022).
- (2014): Experimental investigation on durability performance of rubberized concrete. In: Advances in Concrete Construction, v. 2, n. 3 (November 2014).
- (2021): Optimization and modeling of axial strength of concrete-filled double skin steel tubular columns using response surface and neural-network methods. In: Journal of Building Engineering, v. 43 (November 2021).
- (2021): Effect of oxide composition and ingredient proportions on the rheological and mechanical properties of geopolymer mortar incorporating pumice aggregate. In: Journal of Building Engineering, v. 34 (February 2021).
- (2020): Combined effects of microsilica, steel fibre and artificial lightweight aggregate on the shrinkage and mechanical performance of high strength cementitious composite. In: Construction and Building Materials, v. 262 (November 2020).
- (2020): Influence of artificial aggregate on mechanical properties, fracture parameters and bond strength of concretes. In: Construction and Building Materials, v. 238 (March 2020).
- (2014): Analytical prediction of available rotation capacity of cold-formed rectangular and square hollow section beams. In: Thin-Walled Structures, v. 77 (April 2014).
- (2015): Predictive models of the flexural overstrength factor for steel thin-walled circular hollow section beams. In: Thin-Walled Structures, v. 94 (September 2015).
- (2017): Fresh, Mechanical and Absorption Characteristics of Self-Consolidating Concretes Including Low Volume Waste PET Granules. In: Civil Engineering Journal, v. 3, n. 10 (November 2017).
- (2014): Prediction of the flexural overstrength factor for steel beams using artificial neural network. In: Steel and Composite Structures, v. 17, n. 3 (September 2014).
- (2013): A novel formulation of the flexural overstrength factor for steel beams. In: Journal of Constructional Steel Research, v. 90 (November 2013).
- (2012): Fresh and hardened characteristics of self compacting concretes made with combined use of marble powder, limestone filler, and fly ash. In: Construction and Building Materials, v. 37 (December 2012).
- (2013): Effect of silica fume and steel fiber on the mechanical properties of the concretes produced with cold bonded fly ash aggregates. In: Construction and Building Materials, v. 40 (March 2013).
- (2013): Experimental evaluation and modeling of drying shrinkage behavior of metakaolin and calcined kaolin blended concretes. In: Construction and Building Materials, v. 43 (June 2013).
- (2013): Strength and transport properties of steam cured and water cured lightweight aggregate concretes. In: Construction and Building Materials, v. 49 (December 2013).
- (2014): Enhancement of shrinkage behavior of lightweight aggregate concretes by shrinkage reducing admixture and fiber reinforcement. In: Construction and Building Materials, v. 54 (March 2014).
- (2015): Strength and permeability properties of self-compacting concrete with cold bonded fly ash lightweight aggregate. In: Construction and Building Materials, v. 74 (January 2015).
- (2015): Explicit formulation of drying and autogenous shrinkage of concretes with binary and ternary blends of silica fume and fly ash. In: Construction and Building Materials, v. 94 (September 2015).
- (2017): Optimization of lightweight GGBFS and FA geopolymer mortars by response surface method. In: Construction and Building Materials, v. 139 (May 2017).
- (2014): Permeability properties of concretes with high reactivity metakaolin and calcined impure kaolin. In: Materials and Structures, v. 47, n. 4 (April 2014).
- (2015): Numerical modeling of time to corrosion induced cover cracking in reinforced concrete using soft-computing based methods. In: Materials and Structures, v. 48, n. 6 (June 2015).
- (2016): Evaluation and modeling of ultimate bond strength of corroded reinforcement in reinforced concrete elements. In: Materials and Structures, v. 49, n. 8 (August 2016).
- (2008): Improving strength, drying shrinkage, and pore structure of concrete using metakaolin. In: Materials and Structures, v. 41, n. 5 (June 2008).
- (2014): Effect of volcanic pumice powder on the fresh properties of self-compacting concretes with and without silica fume. In: Materials and Structures, v. 47, n. 11 (November 2014).
- (2007): Comparative study on strength, sorptivity, and chloride ingress characteristics of air-cured and water-cured concretes modified with metakaolin. In: Materials and Structures, v. 40, n. 10 (December 2007).
- (2016): Assessment of shear capacity of adhesive anchors for structures using neural network based model. In: Materials and Structures, v. 49, n. 3 (March 2016).
- (2012): Microstructural properties and pozzolanic activity of calcined kaolins as supplementary cementing materials. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 39, n. 12 (December 2012).
Structurae cooperates with
