0
  • DE
  • EN
  • FR
  • International Database and Gallery of Structures

Advertisement

G. Meneghetti ORCID

The following bibliography contains all publications indexed in this database that are linked with this name as either author, editor or any other kind of contributor.

  1. Resente, A. / Ricotta, M. / Sorgato, M. / Meneghetti, G. (2024): Static strength assessment of short glass fibre-reinforced polyphenilenesulphide in presence of notches according to different approaches. In: Composite Structures, v. 344 (September 2024).

    https://doi.org/10.1016/j.compstruct.2024.118312

  2. Meneghetti, G. / Campagnolo, A. / Atzori, B. (2018): The Peak Stress Method for fatigue analysis of welded details. Presented at: Ninth International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, 9-13 July 2018, Melbourne, Australia.

    https://doi.org/10.1201/9781315189390-61

  3. Meneghetti, G. / Terrin, A. / Giacometti, S. (2016): A twin disc test rig for contact fatigue characterization of gear materials. In: Procedia Structural Integrity, v. 2 ( 2016).

    https://doi.org/10.1016/j.prostr.2016.06.397

  4. Meneghetti, G. / Ricotta, M. / Sanità, M. / Refosco, D. (2016): Fully Reversed Axial Notch Fatigue Behaviour of Virgin and Recycled Polypropylene Compounds. In: Procedia Structural Integrity, v. 2 ( 2016).

    https://doi.org/10.1016/j.prostr.2016.06.282

  5. Ferro, P. / Colussi, M. / Meneghetti, G. / Berto, F. / Lachin, M. / Castiglione, S. A. (2017): On the use of the Peak Stress Method for the calculation of Residual Notch Stress Intensity Factors: a preliminary investigation. In: Procedia Structural Integrity, v. 3 ( 2017).

    https://doi.org/10.1016/j.prostr.2017.04.037

  6. Meneghetti, G. / Rigon, D. / Cozzi, D. / Waldhauser, W. / Dabalà, M. (2017): Influence of build orientation on static and axial fatigue properties of maraging steel specimens produced by additive manufacturing. In: Procedia Structural Integrity, v. 7 ( 2017).

    https://doi.org/10.1016/j.prostr.2017.11.072

  7. Terrin, A. / Libardoni, M. / Meneghetti, G. (2018): Experimental analysis of tooth-root strains in a sun gear of the final drive for an off-highway axle. In: Procedia Structural Integrity, v. 8 ( 2018).

    https://doi.org/10.1016/j.prostr.2017.12.029

  8. Rigon, D. / Ricotta, M. / Meneghetti, G. (2020): A literature survey on structural integrity of 3D printed virgin and recycled ABS and PP compounds. In: Procedia Structural Integrity, v. 28 ( 2020).

    https://doi.org/10.1016/j.prostr.2020.10.139

  9. Meneghetti, G. / Vecchiato, L. / Campagnolo, A. / Rech, P. / Cova, M. (2020): Numerical calibration of the direct current potential drop (DCPD) method in fracture mechanics fatigue tests. In: Procedia Structural Integrity, v. 28 ( 2020).

    https://doi.org/10.1016/j.prostr.2020.10.126

  10. Meneghetti, G. / Ricotta, M. / Atzori, B. (2014): The specific heat loss combined with the thermoelastic effect for an experimental analysis of the mean stress influence on axial fatigue of stainless steel plain specimens. In: Frattura ed Integrità Strutturale, v. 8, n. 30 (September 2014).

    https://doi.org/10.3221/igf-esis.30.25

  11. Atzori, B. / Meneghetti, G. / Ricotta, M. (2011): Analysis of the fatigue strength under two load levels of a stainless steel based on energy dissipation. In: Frattura ed Integrità Strutturale, v. 5, n. 17 (July 2011).

    https://doi.org/10.3221/igf-esis.17.02

  12. Atzori, B. / Meneghetti, G. / Rossi, B. (2009): Resistenza a fatica di strutture in leghe di alluminio: normative a confronto e verifica sperimentale. In: Frattura ed Integrità Strutturale, v. 3, n. 9 (July 2009).

    https://doi.org/10.3221/igf-esis.09.04

  13. Meneghetti, G. (2009): Utilizzo della tensione di picco per la verifica a fatica dei giunti saldati d’angolo con il metodo degli elementi finiti. In: Frattura ed Integrità Strutturale, v. 3, n. 9 (July 2009).

    https://doi.org/10.3221/igf-esis.09.09

  14. Meneghetti, G. / Campagnolo, A. / Berto, F. (2015): Some relationships between the peak stresses and the local strain energy density for cracks subjected to mixed-mode (I+II) loading. In: Frattura ed Integrità Strutturale, v. 9, n. 33 (June 2015).

    https://doi.org/10.3221/igf-esis.33.05

  15. Meneghetti, G. / Ricotta, M. (2017): The heat energy dissipated in a control volume to correlate the crack propagation rate in stainless steel specimens. In: Frattura ed Integrità Strutturale, v. 11, n. 41 (June 2017).

    https://doi.org/10.3221/igf-esis.41.40

  16. Meneghetti, G. / Ricotta, M. (2015): Experimental estimation of the heat energy dissipated in a volume surrounding the tip of a fatigue crack. In: Frattura ed Integrità Strutturale, v. 10, n. 35 (December 2015).

    https://doi.org/10.3221/igf-esis.35.20

  17. Meneghetti, G. / Atzori, B. / Campagnolo, A. / Berto, F. (2015): A link between the peak stresses and the averaged strain energy density for cracks under mixed-mode (I+II) loading. In: Frattura ed Integrità Strutturale, v. 9, n. 34 (September 2015).

    https://doi.org/10.3221/igf-esis.34.11

Search for a publication...

Only available with
My Structurae

Full text
Structurae cooperates with
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine