Priyan Mendis 
- (2023): Matrix design and performance development of eco-friendly high-strength, lightweight engineered cementitious composites. In: Journal of Building Engineering, v. 77 (October 2023).
- (2021): Microstructural Investigation of High-Volume Fly Ash Composites Containing Nano-Calcium Silicate Hydrate Crystals. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 12 (December 2021).
- (2021): A review and comparison of design methods for raft substructures on expansive soils. In: Journal of Building Engineering, v. 41 (September 2021).
- (2021): Residual stress-strain relationship for the biochar-based mortar after exposure to elevated temperature. In: Case Studies in Construction Materials, v. 14 (June 2021).
- (2019): Novel energy-based rational for nominal ductility design of very-high strength concrete columns (>100 MPa). In: Engineering Structures, v. 198 (November 2019).
- (2009): Modelling the dynamic response and failure modes of reinforced concrete structures subjected to blast and impact loading. In: Structural Engineering and Mechanics, v. 32, n. 2 (May 2009).
- (2021): Prefabricated Composite Steel-Timber Stiffened Wall Systems with Post-Tensioning: Structural Analysis and Experimental Investigation under Vertical Axial Load. In: Journal of Structural Engineering (ASCE), v. 147, n. 2 (February 2021).
- (2020): Life cycle performance of Cross Laminated Timber mid-rise residential buildings in Australia. In: Energy and Buildings, v. 223 (September 2020).
- (2015): Practical countermeasures for the aerodynamic performance of long-span cable-stayed bridges with open decks. In: Wind & Structures, v. 21, n. 2 (August 2015).
- (2020): Multi-scale analysis on thermal properties of cement-based materials containing micro-encapsulated phase change materials. In: Construction and Building Materials, v. 254 (September 2020).
- (2020): Large-scale experiment on the behaviour of concrete flat slabs subjected to standard fire. In: Journal of Building Engineering, v. 30 (July 2020).
- (2019): Prefabrication of substructures for single-detached dwellings on reactive soils: a review of existing systems and design challenges. In: Australian Journal of Civil Engineering, v. 17, n. 2 ( 2019).
- (2015): Numerical simulation of structural responses to a far-field explosion. In: Australian Journal of Structural Engineering, v. 16, n. 4 (October 2015).
- (2006): Progressive Collapse Analysis of RC Frames Subjected to Blast Loading. In: Australian Journal of Structural Engineering, v. 7, n. 2 ( 2006- 2007).
- (2003): Performance of interior post-tensioned concrete wide beams when subjected to lateral earthquake loading. In: Australian Journal of Structural Engineering, v. 5, n. 3 ( 2003- 2004).
- (2018): Manufacturing, Modeling, Implementation and Evaluation of a Weatherproof Seal for Prefabricated Construction. In: Buildings, v. 8, n. 9 (August 2018).
- (2019): Performance of lightweight hemp concrete with alkali-activated cenosphere binders exposed to elevated temperature. In: Construction and Building Materials, v. 224 (November 2019).
- (2019): New advancements, challenges and opportunities of multi-storey modular buildings – A state-of-the-art review. In: Engineering Structures, v. 183 (March 2019).
- (2017): Shear Strengthening and Shear Repair of 2-Span Continuous RC Beams with CFRP Strips. In: Journal of Composites for Construction, v. 21, n. 3 (June 2017).
- (2017): Shear Behavior of Geopolymer Concrete Beams Reinforced with GFRP Bars. In: ACI Structural Journal, v. 114, n. 2 (March 2017).
- (2016): Properties of cementitious mortar and concrete containing micro-encapsulated phase change materials. In: Construction and Building Materials, v. 120 (September 2016).
- (2018): Performance of high-strength concrete walls exposed to fire. In: Advances in Structural Engineering, v. 21, n. 8 (January 2018).
- (2015): Post-yield capacity of cold-formed channel sections in bending. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 168, n. 4 (April 2015).
- (2015): Quantification of the Blast-Loading Parameters of Large-Scale Explosions. In: Journal of Structural Engineering (ASCE), v. 141, n. 10 (October 2015).
- (2016): A probabilistic study of ground motion simulation for Bangkok soil. In: Bulletin of Earthquake Engineering, v. 15, n. 5 (November 2016).
- (2000): Optimum Use of High Performance Concrete in Prestressed Concrete Super-T Bridge Beams. In: PCI Journal, v. 45, n. 3 (May 2000).
- (2015): Investigations of Cavity Pressure Behaviors of Double-Skin Façade Systems Subjected to Blast Loads. In: Journal of Performance of Constructed Facilities (ASCE), v. 29, n. 5 (October 2015).
- (2000): Softening of Normal Strength and High-Strength Concrete Frames. In: Advances in Structural Engineering, v. 3, n. 2 (April 2000).
- (2014): Section classifications for cold-formed channel steel. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 167, n. 7 (July 2014).
- (2013): Rate Dependent Stress-Strain Relationship Model for Normal, High and Ultra-High Strength Concrete. In: International Journal of Protective Structures, v. 4, n. 3 (September 2013).
Structurae cooperates with
