Jaime Mata-Falcón 
- (2025): Cracked Membrane Model for Strain-Softening Fiber-Reinforced Concrete. In: Journal of Structural Engineering (ASCE), v. 151, n. 1 (January 2025).
- (2025): Experimental and analytical investigation of the crack behaviour of dapped-end beams. In: Engineering Structures, v. 322 (January 2025).
- (2023): Experimental investigation of the shear response of large-scale fibre-reinforced concrete panels. In: Engineering Structures, v. 295 (November 2023).
- (2023): Stress field model for bond in reinforced concrete ties. In: Engineering Structures, v. 294 (November 2023).
- (2023): Experimental investigation of bond and crack behaviour of reinforced concrete ties using distributed fibre optical sensing and digital image correlation. In: Engineering Structures, v. 292 (October 2023).
- (2023): Experimental exploration of digitally fabricated connections for structural concrete. In: Engineering Structures, v. 285 (June 2023).
- (2020): From Smart Dynamic Casting to a growing family of Digital Casting Systems. In: Cement and Concrete Research, v. 134 (August 2020).
- (2020): Opportunities and challenges for structural engineering of digitally fabricated concrete. In: Cement and Concrete Research, v. 133 (July 2020).
- (2018): Rethinking reinforcement for digital fabrication with concrete. In: Cement and Concrete Research, v. 112 (October 2018).
- (2023): Structural behaviour of post-installed reinforcement for 3D concrete printed shells – A case study on water tanks. In: Construction and Building Materials, v. 366 (February 2023).
- (2022): Shear strength of concrete beams using stay-in-place flexible formworks with integrated transverse textile reinforcement. In: Engineering Structures, v. 271 (November 2022).
- (2022): Digitally fabricated ribbed concrete floor slabs: a sustainable solution for construction. In: RILEM Technical Letters, v. 7 (August 2022).
- (2022): Design and fabrication of optimised ribbed concrete floor slabs using large scale 3D printed formwork. In: Automation in Construction, v. 144 (December 2022).
- (2022): Direction-dependent behaviour and size effect of steel fibre reinforced concrete based on the double punch test. In: Materials and Structures, v. 55, n. 7 (5 August 2022).
- (2022): Influence of short glass fibres and spatial features on the mechanical behaviour of weft-knitted textile reinforced concrete elements in bending. In: Construction and Building Materials, v. 344 (August 2022).
- (2021): Design and assessment with strut-and-tie models and stress fields: from simple calculations to detailed numerical analysis.. fédération internationale du béton (fib), Lausanne (Switzerland), ISBN 978-2-88394-151-9.
- (2022): Analysis of the tension chord in the flexural response of concrete elements: Methodology and application to weft-knitted textile reinforcement. In: Engineering Structures, v. 261 (June 2022).
- (2021): Load-deformation behaviour of weft-knitted textile reinforced concrete in uniaxial tension. In: Materials and Structures, v. 54, n. 6 (20 November 2021).
- (2022): Refined extraction of crack characteristics in large-scale concrete experiments based on digital image correlation. In: Engineering Structures, v. 251 (January 2022).
- (2021): Structural behaviour of 3D printed concrete beams with various reinforcement strategies. In: Engineering Structures, v. 240 (August 2021).
- (2020): Combined application of distributed fibre optical and digital image correlation measurements to structural concrete experiments. In: Engineering Structures, v. 225 (December 2020).
- (2020): Automated crack detection and measurement based on digital image correlation. In: Construction and Building Materials, v. 256 (September 2020).
- (2020): Structural stay-in-place formwork for robotic in situ fabrication of non-standard concrete structures: A real scale architectural demonstrator. In: Automation in Construction, v. 115 (July 2020).
- (2019): Compression Field Analysis of Fiber-Reinforced Concrete Based on Cracked Membrane Model. In: ACI Structural Journal, v. 116, n. 5 (September 2019).
- (2020): Cracked Membrane Model with Fixed, Interlocked Cracks: Numerical Implementation and Validation. In: Journal of Structural Engineering (ASCE), v. 146, n. 2 (February 2020).
- (2019): Proposal and experimental validation of simplified strut-and-tie models on dapped-end beams. In: Engineering Structures, v. 183 (March 2019).
Structurae cooperates with
