Mohammed Maslehuddin 
- (2024): Properties of Alkali-Activated Concrete Made Using the Optimum Combinations of Precursor Materials and Activation Parameters. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 4 (April 2024).
- (2023): Optimization of alkali-activated binders using natural minerals and industrial waste materials as precursor materials. In: Journal of Building Engineering, v. 69 (June 2023).
- (2022): Molecular-level investigation on the effect of surface moisture on the bonding behavior of cement-epoxy interface. In: Journal of Building Engineering, v. 61 (December 2022).
- (2023): Strategies for strengthening of corroded reinforced concrete beams using CFRP laminates and UHPC jacketing. In: Structural Concrete, v. 24, n. 1 (February 2023).
- (2022): Properties and sustainability of treated crumb rubber concrete. In: Journal of Building Engineering, v. 51 (July 2022).
- (2022): A review on treatment techniques to improve the durability of recycled aggregate concrete: Enhancement mechanisms, performance and cost analysis. In: Journal of Building Engineering, v. 55 (September 2022).
- (2020): Properties of natural pozzolan-based geopolymer concrete: effects of natural pozzolan content, type of alkaline activator, and silicate/alkali ratio. In: European Journal of Environmental and Civil Engineering, v. 27, n. 1 (November 2020).
- (2021): Influence of mix composition on the properties of recycled aggregate concrete. In: Structural Concrete, v. 22, n. 5 (September 2021).
- (2021): Performance evaluation of heavy oil fly ash as a retarder of Portland cement hydration. In: Journal of Building Engineering, v. 34 (February 2021).
- (2021): Influence of in-situ casting temperature and curing regime on the properties of blended cement concretes under hot climatic conditions. In: Construction and Building Materials, v. 272 (February 2021).
- (2020): Magnesium sulfate resistance of alkali/slag activated silico-manganese fume-based composites. In: Construction and Building Materials, v. 265 (December 2020).
- (2020): Stabilization and Solidification of Oil-Contaminated Sandy Soil Using Portland Cement and Supplementary Cementitious Materials. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 8 (August 2020).
- (2021): Sodium sulfate resistance of alkali/slag activated silico–manganese fume‐based composites. In: Structural Concrete, v. 22 (January 2021).
- (2020): Influence of heat curing period and temperature on the strength of silico-manganese fume-blast furnace slag-based alkali-activated mortar. In: Construction and Building Materials, v. 251 (August 2020).
- (2021): Sulfuric acid resistance of alkali/slag activated silico-manganese fume-based mortars. In: Structural Concrete, v. 22 (January 2021).
- (2018): Influence of nano-SiO2 on the strength and microstructure of natural pozzolan based alkali activated concrete. In: Construction and Building Materials, v. 173 (June 2018).
- (2019): Influence of accelerated carbonation curing on the properties of self-compacting concrete mixtures containing different mineral fillers. In: European Journal of Environmental and Civil Engineering, v. 26, n. 1 (October 2019).
- (2019): Radiation shielding performance of heavy-weight concrete mixtures. In: Construction and Building Materials, v. 224 (November 2019).
- (2019): Modelling the early strength of alkali-activated cement composites containing palm oil fuel ash. In: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 172, n. 3 (June 2019).
- (2019): Influence of composition and concentration of alkaline activator on the properties of natural-pozzolan based green concrete. In: Construction and Building Materials, v. 201 (March 2019).
- (1992): Strength and Corrosion Resistance of Superplasticized Concretes. In: Journal of Materials in Civil Engineering (ASCE), v. 4, n. 1 (February 1992).
- (1994): Influence of atmospheric corrosion on the mechanical properties of reinforcing steel. In: Construction and Building Materials, v. 8, n. 1 (January 1994).
- (1995): Role of chloride ions on expansion and strength reduction in plain and blended cements in sulfate environments. In: Construction and Building Materials, v. 9, n. 1 (February 1995).
- (2009): Performance of generic and proprietary corrosion inhibitors in chloride-contaminated silica fume cement concrete. In: Construction and Building Materials, v. 23, n. 5 (May 2009).
- (2014): Strength and microstructure of alkali-activated binary blended binder containing palm oil fuel ash and ground blast-furnace slag. In: Construction and Building Materials, v. 52 (February 2014).
- (2014): Influence of curing methods and concentration of NaOH on strength of the synthesized alkaline activated ground slag-ultrafine palm oil fuel ash mortar/concrete. In: Construction and Building Materials, v. 66 (September 2014).
- (2014): Properties of self-consolidating concrete made utilizing alternative mineral fillers. In: Construction and Building Materials, v. 68 (October 2014).
- (2019): Influence of admixing natural pozzolan as partial replacement of cement and microsilica in UHPC mixtures. In: Construction and Building Materials, v. 198 (February 2019).
- (2017): POFA-Engineered Alkali-activated Cementitious Composite Performance in Acid Environment. In: Journal of Advanced Concrete Technology, v. 15, n. 11 ( 2017).
- (2014): Performance of Different Grades of Palm Oil Fuel Ash with Ground Slag as Base Materials in the Synthesis of Alkaline Activated Mortar. In: Journal of Advanced Concrete Technology, v. 12, n. 10 ( 2014).
Structurae cooperates with
