Angelo Masi 
- (2023): Loss Functions for the Risk Assessment of Residential Buildings. In: Buildings, v. 13, n. 11 (26 October 2023).
- (2023): Level 3 Assessment of Highway Girder Deck Bridges according to the Italian Guidelines: Influence of Transverse Load Distribution. In: Buildings, v. 13, n. 7 (28 June 2023).
- (2021): The Italian Guidelines on Risk Classification and Management of Bridges: Applications and Remarks on Large Scale Risk Assessments. In: Infrastructures, v. 6, n. 8 (August 2021).
- (2021): Durability of Gerber Saddles in RC Bridges: Analyses and Applications (Musmeci Bridge, Italy). In: Infrastructures, v. 6, n. 2 (February 2021).
- (2023): An Italian platform for the seismic risk assessment of school buildings. In: Procedia Structural Integrity, v. 44 ( 2023).
- (2022): Modelling and Seismic Response Analysis of Italian Pre-Code and Low-Code Reinforced Concrete Buildings. Part II: Infilled Frames. In: Journal of Earthquake Engineering, v. 27, n. 6 (May 2022).
- (2022): Modelling and Seismic Response Analysis of Italian pre-code and low-code Reinforced Concrete Buildings. Part I: Bare Frames. In: Journal of Earthquake Engineering, v. 27, n. 6 (May 2022).
- (2013): Analysis of Site Response and Building Damage Distribution Induced by the 31 October 2002 Earthquake at San Giuliano di Puglia (Italy). In: Earthquake Spectra, v. 29, n. 2 (May 2013).
- (2019): Modeling of Landslide–Tunnel Interaction: the Varco d’Izzo Case Study. In: Geotechnical and Geological Engineering, v. 37, n. 6 (10 August 2019).
- (2022): Selection and spectral matching of recorded ground motions for seismic fragility analyses. In: Bulletin of Earthquake Engineering, v. 20, n. 10 (27 June 2022).
- (2020): Seismic Upgrading of RC Wide Beam–Column Joints Using Steel Jackets. In: Buildings, v. 10, n. 11 (23 October 2020).
- (2020): Analysis of slab action on the seismic behavior of external RC beam-column joints. In: Journal of Building Engineering, v. 32 (November 2020).
- (2020): Numerical Evaluation of the Steel Plate Energy Absorption Device (SPEAD) for Seismic Strengthening of RC Frame Structures. In: International Journal of Civil Engineering, v. 18, n. 8 (April 2020).
- (2020): Correlations between macroseismic intensity estimations and ground motion measures of seismic events. In: Bulletin of Earthquake Engineering, v. 18, n. 5 (January 2020).
- (2019): Key Mechanisms of the Seismic Behaviour of External RC Wide Beam–column Joints. In: The Open Construction and Building Technology Journal, v. 13, n. 1 (November 2019).
- (2018): Seismic Strengthening and Energy Efficiency: Towards an Integrated Approach for the Rehabilitation of Existing RC Buildings. In: Buildings, v. 8, n. 3 (March 2018).
- (2014): Identification of the structural model and analysis of the global seismic behaviour of a RC damaged building. In: Soil Dynamics and Earthquake Engineering, v. 65 (October 2014).
- (2018): Modeling and Seismic Response Analysis of Italian Code-Conforming Reinforced Concrete Buildings. In: Journal of Earthquake Engineering, v. 22 ( 2018).
- (2019): Recommendation of RILEM TC249-ISC on non destructive in situ strength assessment of concrete. In: Materials and Structures, v. 52, n. 4 (June 2019).
- (2003): Quick Survey of the Possible Causes of Damage Enhancement Observed in San Giuliano after the 2002 Molise, Italy Seismic Sequence. In: Journal of Earthquake Engineering, v. 7, n. 4 ( 2003).
- (2012): Cyclic Tests on External RC Beam-Column Joints: Role of Seismic Design Level and Axial Load Value on the Ultimate Capacity. In: Journal of Earthquake Engineering, v. 17, n. 1 ( 2012).
- (2016): Criteria for identifying concrete homogeneous areas for the estimation of in-situ strength in RC buildings. In: Construction and Building Materials, v. 121 (September 2016).
- (2015): Seismic performance of RC beam–column joints retrofitted with steel dissipation jackets. In: Engineering Structures, v. 85 (February 2015).
- (2013): Performance of the health facilities during the 2012 Emilia (Italy) earthquake and analysis of the Mirandola hospital case study. In: Bulletin of Earthquake Engineering, v. 12, n. 5 (December 2013).
- (2013): The role of site effects in the comparison between code provisions and the near field strong motion of the Emilia 2012 earthquakes. In: Bulletin of Earthquake Engineering, v. 12, n. 5 (December 2013).
- (2016): Consistency of analysis methods considered in EC8-3 for the seismic assessment of RC existing buildings. In: Bulletin of Earthquake Engineering, v. 15, n. 7 (December 2016).
- (2011): Building damage scenarios based on exploitation of Housner intensity derived from finite faults ground motion simulations. In: Bulletin of Earthquake Engineering, v. 10, n. 2 (August 2011).
- (2003): Seismic Vulnerability Assessment of Gravity Load Designed R/C Frames. In: Bulletin of Earthquake Engineering, v. 1, n. 3 ( 2003).
- (2011): Selection of Natural and Synthetic Accelerograms for Seismic Vulnerability Studies on Reinforced Concrete Frames. In: Journal of Structural Engineering (ASCE), v. 137, n. 3 (March 2011).
- (2009): Experimental and numerical evaluation of the fundamental period of undamaged and damaged RC framed buildings. In: Bulletin of Earthquake Engineering, v. 8, n. 3 (April 2009).
Structurae cooperates with
