Edoardo M. Marino 
- (2022): Calibration of the Length of the Plastic Hinge for Numerical Models of Reinforced Concrete Members. In: Buildings, v. 12, n. 10 (20 September 2022).
- (2022): Optimal design of the connection between RC slab and precast pre-stressed beam to column joint. In: Engineering Structures, v. 270 (November 2022).
- (2022): Design of Steel Exoskeleton Equipped with BRBs for Seismic Upgrading of RC Frames. In: The Open Construction and Building Technology Journal, v. 16, n. 1 (3 February 2022).
- (2022): Experimental Cyclic Response of a Novel Friction Connection for Seismic Retrofitting of RC Buildings with CLT Panels. In: Journal of Structural Engineering (ASCE), v. 148, n. 5 (May 2022).
- (2021): Proposal and validation of a design procedure for concentrically braced frames in the chevron configuration. In: Earthquake Engineering and Structural Dynamics, v. 50, n. 11 (September 2021).
- (2021): Seismic performance and cost comparative analysis of steel braced frames designed in the framework of EC8. In: Engineering Structures, v. 240 (August 2021).
- (2019): Design, testing and finite element analysis of an improved precast prestressed beam-to-column joint. In: Engineering Structures, v. 199 (November 2019).
- (2021): An over-damped multimodal adaptive nonlinear static analysis for seismic assessment of infilled RC buildings. In: Engineering Structures, v. 229 (February 2021).
- (2020): Full‐scale hybrid test for realistic verification of a seismic upgrading technique of RC frames by BRBs. In: Earthquake Engineering and Structural Dynamics, v. 49, n. 14 (November 2020).
- (2019): On the fibre modelling of beams in RC framed buildings with rigid diaphragm. In: Bulletin of Earthquake Engineering, v. 18, n. 1 (October 2019).
- (2017): A multimodal adaptive evolution of the N1 method for assessment and design of r.c. framed structures. In: Earthquakes and Structures, v. 12, n. 3 (March 2017).
- (2015): Critical review of the EC8 design provisions for buildings with eccentric braces. In: Earthquakes and Structures, v. 8, n. 6 (June 2015).
- (2018): Experimental study of a novel precast prestressed reinforced concrete beam-to-column joint. In: Engineering Structures, v. 156 (February 2018).
- (2015): Preliminary Validation of a Multimodal Adaptive Procedure. Presented at: IABSE Conference: Elegance in structures, Nara, Japan, 13-15 May 2015.
- (2017): multi-performance design method for seismic upgrading of existing RC frames by BRBs. In: Earthquake Engineering and Structural Dynamics, v. 46, n. 7 (June 2017).
- (2014): An accurate strength amplification factor for the design of SDOF systems withP-Δ effects. In: Earthquake Engineering and Structural Dynamics, v. 43, n. 4 (March 2014).
- (2012): Corrective eccentricities for assessment by the nonlinear static method of 3D structures subjected to bidirectional ground motions. In: Earthquake Engineering and Structural Dynamics, v. 41, n. 13 (25 October 2012).
- (2013): Design method and behavior factor for steel frames with buckling restrained braces. In: Earthquake Engineering and Structural Dynamics, v. 42, n. 8 (10 July 2013).
- (2009): On the evaluation of seismic response of structures by nonlinear static methods. In: Earthquake Engineering and Structural Dynamics, v. 38, n. 13 (25 October 2009).
- (2005): Comparison of European and Japanese seismic design of steel building structures. In: Engineering Structures, v. 27, n. 6 (May 2005).
- (2016): Influence of modelling of steel link beams on the seismic response of EBFs. In: Engineering Structures, v. 127 (November 2016).
- (2015): Modelling of steel link beams of short, intermediate or long length. In: Engineering Structures, v. 84 (February 2015).
- (2015): Predicting displacement demand of multi-storey asymmetric buildings by nonlinear static analysis and corrective eccentricities. In: Engineering Structures, v. 99 (September 2015).
- (2018): Development of a Minimal-Disturbance Rehabilitation System for Sustaining Bidirectional Loading. In: Journal of Structural Engineering (ASCE), v. 144, n. 6 (June 2018).
- (2013): An analytical method for the evaluation of the in-plan irregularity of non-regularly asymmetric buildings. In: Bulletin of Earthquake Engineering, v. 11, n. 5 (March 2013).
- (2017): Generalized corrective eccentricities for nonlinear static analysis of buildings with framed or braced structure. In: Bulletin of Earthquake Engineering, v. 15, n. 11 (May 2017).
- (2013): Comparison of nonlinear static methods for the assessment of asymmetric buildings. In: Bulletin of Earthquake Engineering, v. 11, n. 6 (June 2013).
- (2017): 11.23: Influence of the uniaxial material model of steel on the seismic response of steel structures. In: ce/papers, v. 1, n. 2-3 (September 2017).
- (2017): 11.17: Seismic retrofitting of concentrically braced frames by rocking walls and viscous dampers. In: ce/papers, v. 1, n. 2-3 (September 2017).
- (2018): design procedure for pin-supported rocking buckling-restrained braced frames. In: Earthquake Engineering and Structural Dynamics, v. 47, n. 14 (November 2018).
Structurae cooperates with
