Giuseppe Carlo Marano 
- (2024): Passivation behavior of reinforcement in simulated pore solutions of composite cement incorporating ultrafine steel slag and blast furnace slag. In: Journal of Building Engineering, v. 97 (November 2024).
- (2024): New S-g-C3N4 based photocatalytic mortar with long-term photocatalytic performance by constructing three-dimensional structure Mg-Al layered double hydroxides. In: Construction and Building Materials, v. 438 (August 2024).
- (2024): Reinterpretation of catenary vaulted spaces: Construction of a prototype and structural evaluation through Multibody Rope Approach. In: Structures, v. 66 (August 2024).
- : A probabilistic framework for the resilience assessment of transport infrastructure systems via structural health monitoring and control based on a cost function approach. In: Structure and Infrastructure Engineering.
- (2024): Nanoscale chloride diffusion in alkali-activated steel slag and ultrafine blast furnace slag considering the electrical double layer effect. In: Journal of Building Engineering, v. 88 (July 2024).
- (2023): Mortar with Substituted Recycled PET Powder: Experimental Characterization and Data-Driven Strength Predictive Models. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 9 (September 2023).
- (2023): Numerical models comparison for fluid-viscous dampers: Performance investigations through Genetic Algorithm. In: Computers & Structures, v. 288 (November 2023).
- (2023): Noise effects analysis on subspace-based damage detection with neural networks. In: Structures, v. 54 (August 2023).
- (2023): Optimisation-driven design in the architectural, engineering and construction industry. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 176, n. 12 (December 2023).
- (2019): Seismic Reassessment of the Leaning Tower of Pisa: Dynamic Monitoring, Site Response, and SSI. In: Earthquake Spectra, v. 35, n. 2 (May 2019).
- (2017): Numerical and experimental analysis of the leaning Tower of Pisa under earthquake. In: Procedia Engineering, v. 199 ( 2017).
- (2021): A new genetic algorithm-based framework for optimized design of steel-jacketing retrofitting in shear-critical and ductility-critical RC frame structures. In: Engineering Structures, v. 243 (September 2021).
- (2020): Optimal seismic retrofitting of reinforced concrete buildings by steel-jacketing using a genetic algorithm-based framework. In: Engineering Structures, v. 219 (September 2020).
- (2019): Probabilistic seismic response and uncertainty analysis of continuous bridges under near-fault ground motions. In: Frontiers of Structural and Civil Engineering, v. 13, n. 6 (October 2019).
- (2014): New analytical model for the hoop contribution to the shear capacity of circular reinforced concrete columns. In: Computers and Concrete, v. 14, n. 1 (July 2014).
- (2018): Parameter identification of degrading and pinched hysteretic systems using a modified Bouc–Wen model. In: Structure and Infrastructure Engineering, v. 14, n. 12 (December 2018).
- (2008): Sensitivity analysis of optimum stochastic nonstationary response spectra under uncertain soil parameters. In: Soil Dynamics and Earthquake Engineering, v. 28, n. 12 (December 2008).
- (2013): Optimum design of Tuned Mass Dampers by displacement and energy perspectives. In: Soil Dynamics and Earthquake Engineering, v. 49 (June 2013).
- (2013): Site based stochastic seismic spectra. In: Soil Dynamics and Earthquake Engineering, v. 55 (December 2013).
- (2016): Multi-objective optimization of a dissipative connection for seismic protection of wall-frame structures. In: Soil Dynamics and Earthquake Engineering, v. 87 (August 2016).
- (2005): Probabilistic seismic response and reliability assessment of isolated bridges. In: Earthquake Engineering and Engineering Vibration, v. 4, n. 1 (June 2005).
- (2018): Serviceability Performance Analysis of Concrete Box Girder Bridges Under Traffic-Induced Vibrations by Structural Health Monitoring: A Case Study. In: International Journal of Civil Engineering, v. 16, n. 5 (February 2018).
- (2013): Preliminary experimental study on the effects of surface-applied photocatalytic products on the durability of reinforced concrete. In: Construction and Building Materials, v. 48 (November 2013).
- (2014): On the Fresh/Hardened Properties of Cement Composites Incorporating Rubber Particles from Recycled Tires. In: Advances in Civil Engineering, v. 2014 ( 2014).
- (2014): Numerical study on the optimal sensor placement for historic swing bridge dynamic monitoring. In: Structure and Infrastructure Engineering, v. 10, n. 1 (August 2014).
- (2011): Simplified Lateral-Torsional Buckling Analysis in Special Truss-Reinforced Composite Steel-Concrete Beams. In: Journal of Structural Engineering (ASCE), v. 137, n. 12 (December 2011).
- (2008): Multiobjective Optimization Criteria for Linear Structures Subject to Random Vibrations. In: The Open Civil Engineering Journal, v. 2, n. 1 (December 2008).
- (2016): The Performance-cost optimization of tuned mass damper under low-moderate seismic actions. In: The Structural Design of Tall and Special Buildings, v. 25, n. 18 (25 December 2016).
- (2016): The Optimum design of viscous dissipative links in wall-frame systems. In: The Structural Design of Tall and Special Buildings, v. 25, n. 9 (25 June 2016).
- (2009): Robust optimum design of tuned mass dampers for high-rise buildings under moderate earthquakes. In: The Structural Design of Tall and Special Buildings, v. 18, n. 8 (December 2009).
Structurae cooperates with
