Tanvir Manzur 
- (2023): Halloysite clay nanotube composites as coating materials with enhanced properties. In: Construction and Building Materials, v. 392 (August 2023).
- (2021): A parametric study on the graphical approach to assess corrosion vulnerability of concrete mixes in chloride environment. In: Construction and Building Materials, v. 309 (November 2021).
- (2022): Optimum proportion of fly ash or slag for resisting concrete deterioration due to carbonation and chloride ingress. In: Structures, v. 41 (July 2022).
- (2022): Axial Behavior of Columns Confined with Engineered Cementitious Composite. In: ACI Structural Journal, v. 119, n. 1 ( 2022).
- (2021): Rapid curing prospects of geopolymer cementitious composite using frontal polymerization of methyl methacrylate monomer. In: Construction and Building Materials, v. 309 (November 2021).
- (2021): Experimental Evaluation of Deteriorated CMPs Retrofitted by Different Non-invasive Approaches. In: KSCE Journal of Civil Engineering, v. 25, n. 11 (August 2021).
- (2017): Suitability of locally manufactured galvanized iron (GI) wire fiber as reinforcing fiber in brick chip concrete. In: Case Studies in Construction Materials, v. 7 (December 2017).
- (2019): Performance enhancement of brick aggregate concrete using microbiologically induced calcite precipitation. In: Case Studies in Construction Materials, v. 11 (December 2019).
- (2021): Significance of properly proportioned fly ash based blended cement for sustainable concrete structures of tannery industry. In: Structures, v. 29 (February 2021).
- (2019): Investigating significance of various parameters affecting capacity of core drilled columns for safe core extraction. In: Engineering Structures, v. 200 (December 2019).
- (2021): Potential of Starch as Organic Admixture in Cementitious Composites. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 2 (February 2021).
- (2020): Assessment of Progressive Collapse Proneness of Existing Typical Garment Factory Buildings in Bangladesh. In: Journal of Performance of Constructed Facilities (ASCE), v. 34, n. 5 (October 2020).
- (2020): Arrowroot as bio-admixture for performance enhancement of concrete. In: Journal of Building Engineering, v. 30 (July 2020).
- (2020): Combined effect of binder type and target mix-design parameters in delaying corrosion initiation time of concrete. In: Construction and Building Materials, v. 242 (May 2020).
- (2019): Burnt Clay Brick Aggregate for Internal Curing of Concrete under Adverse Curing Conditions. In: KSCE Journal of Civil Engineering, v. 23, n. 12 (November 2019).
- (2019): Delaying time to corrosion initiation in concrete using brick aggregate as internal curing medium under adverse curing conditions. In: Construction and Building Materials, v. 228 (December 2019).
- (2016): Improving performance of light weight concrete with brick chips using low cost steel wire fiber. In: Construction and Building Materials, v. 106 (March 2016).
- (2016): Durability performance of internally cured concrete using locally available low cost LWA. In: KSCE Journal of Civil Engineering, v. 21, n. 4 (July 2016).
- (2015): Optimum mix ratio for carbon nanotubes in cement mortar. In: KSCE Journal of Civil Engineering, v. 19, n. 5 (February 2015).
- (2017): Optimum Proportion of Masonry Chip Aggregate for Internally Cured Concrete. In: International Journal of Concrete Structures and Materials, v. 11, n. 3 (September 2017).
- (2010): Deficiency Analysis of Coastal Buildings toward Storm Damage Reduction. In: Journal of Performance of Constructed Facilities (ASCE), v. 24, n. 2 (April 2010).
- (2018): Corrosion behavior of concrete mixes with masonry chips as coarse aggregate. In: Construction and Building Materials, v. 185 (October 2018).
- (2017): Potential of a Microbiologically Induced Calcite Precipitation Process for Durability Enhancement of Masonry Aggregate Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 5 (May 2017).
Structurae cooperates with
