Kjell Arne Malo
- (2023): Dynamic identification and model calibration of connection stiffness in multi-storey cross-laminated timber buildings. In: Journal of Building Engineering, v. 72 (August 2023).
- (2022): Modeling stiffness of connections and non-structural elements for dynamic response of taller glulam timber frame buildings. In: Engineering Structures, v. 261 (June 2022).
- (2022): Optimization framework for cost and carbon emission of timber floor elements. In: Engineering Structures, v. 252 (February 2022).
- (2022): Moment-resisting beam-to-column timber connections with inclined threaded rods: Structural concept and analysis by use of the component method. In: Construction and Building Materials, v. 322 (March 2022).
- (2022): Network arch timber bridges with light timber decks and spoked configuration of hangers – Parametric study. In: Engineering Structures, v. 253 (February 2022).
- (2021): Parametric analyses and feasibility study of moment-resisting timber frames under service load. In: Engineering Structures, v. 228 (February 2021).
- (2020): On strength and stiffness of screwed-in threaded rods embedded in softwood. In: Construction and Building Materials, v. 261 (November 2020).
- (2020): Stress-laminated timber decks in bridges: Friction between lamellas, butt joints and pre-stressing system. In: Engineering Structures, v. 213 (June 2020).
- (2013): Modified hysteretic damping model applied to Timoshenko timber beams. In: Computers & Structures, v. 121 (May 2013).
- (2015): Withdrawal capacity of threaded rods embedded in timber elements. In: Construction and Building Materials, v. 94 (September 2015).
- (2016): Withdrawal stiffness of threaded rods embedded in timber elements. In: Construction and Building Materials, v. 116 (July 2016).
- (2017): Moment resisting splice of timber beams using long threaded rods and grout-filled couplers – Experimental results and predictive models. In: Construction and Building Materials, v. 155 (November 2017).
- (2015): Prediction of material damping in timber floors, and subsequent evaluation of structural damping. In: Materials and Structures, v. 48, n. 6 (June 2015).
- (2017): Parametric study of radial hanger patterns for network arch timber bridges with a light deck on transverse crossbeams. In: Engineering Structures, v. 153 (December 2017).
- (2018): Moment resisting on-site splice of large glulam elements by use of mechanically coupled long threaded rods. In: Engineering Structures, v. 163 (May 2018).
- (2018): Parametric study on effects of load position on the stress distribution in network arch timber bridges with light timber decks on transverse crossbeams. In: Engineering Structures, v. 163 (May 2018).
- (2012): Effect of self-tapping screws on moisture induced stresses in glulam. In: Engineering Structures, v. 45 (December 2012).
- (2001): Fatigue tests on dowel joints in timber structures. Presented at: IABSE Conference: Innovative Wooden Structures and Bridges, Lahti, Finnland, 29-31 August 2001.
Structurae cooperates with
