Koichi Maekawa 
- (2008): Practitioners’ guide to finite element modelling of reinforced concrete structures. fédération internationale du béton (fib), Lausanne (Switzerland), ISBN 9782883940857.
- (2022): Simulation of concrete structures deformation affected by alkali–silica reaction considering environmental conditions and multiaxial stress state. In: Structure and Infrastructure Engineering, v. 18, n. 10-11 (August 2022).
- (2021): Remaining Shear Capacity of Fire-Damaged High Strength RC Beams after Moist Curing. In: Journal of Advanced Concrete Technology, v. 19, n. 8 (12 August 2021).
- (1992): Qualitative Studies On Mechanisms Of Stress Transfer Across Cracks In Concrete. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 1992, n. 451 ( 1992).
- (1990): Quantification Of Heat Evolution During Hydration Process Of Cement In Concrete. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 1990, n. 414 (February 1990).
- (1998): Shear Resistance And Ductility Of RC Columns After Yield Of Main Reinforcement. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 1998, n. 585 (February 1998).
- (1999): Re-formulation Of Spatially Averaged RC Constitutive Model With Quasi-orthogonal Bi-directional Cracking. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 1999, n. 634 (November 1999).
- (2001): Quantitative Evaluation Of Non-uniform Quality Of Concrete In RC Members. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 2001, n. 669 (February 2001).
- (2001): Shear Failure Of RC Members Subjected To Pre-cracks And Combined Axial Tension And Shear. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 2001, n. 690 (November 2001).
- (2002): Shear Failure And Numerical Performance Evaluation Of RC Beam Members With High Strength Materials. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 2002, n. 697 (February 2002).
- (2003): Proposed Model Of Shear Deformation Of Reinforced Concrete Beam After Diagonal Cracking. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 2003, n. 725 ( 2003).
- (2020): Shear Bifurcation and Gravelization of Low-Strength Concrete. In: Journal of Advanced Concrete Technology, v. 18, n. 12 (9 December 2020).
- (2020): Research on earthquake dynamic behavior of uneven multi-section subway tunnel in transverse direction. In: Soils and Foundations, v. 60, n. 5 (October 2020).
- (2020): Prediction of maximum thermal crack width of RC abutments utilizing actual construction data and study on influential parameters using neural networks. In: Construction and Building Materials, v. 260 (November 2020).
- (2020): Restraint Effect of Reinforcing Bar on ASR Expansion and Deterioration Characteristic of the Bond Behavior. In: Journal of Advanced Concrete Technology, v. 18, n. 4 (15 April 2020).
- (2019): Proposal of poro-mechanical coupling among ASR, corrosion and frost action for damage assessment of structural concrete with water. In: Engineering Structures, v. 188 (June 2019).
- (2019): Quantitative Deterioration Assessment of Road Bridge Decks Based on Site Inspected Cracks under Stagnant Water. In: Journal of Advanced Concrete Technology, v. 17, n. 1 (January 2019).
- (2017): Shear Creep Failures of Reinforced Concrete Slender Beams without Shear Reinforcement. In: ACI Structural Journal, v. 114, n. 6 (November 2017).
- (2017): Remaining Fatigue Life Assessment of Damaged RC Decks -Data Assimilation of Multi-scale Model and Site Inspection-. In: Journal of Advanced Concrete Technology, v. 15, n. 7 ( 2017).
- (2013): Pseudo-Cracking Approach to Fatigue life Assessment of RC Bridge Decks in Service. In: Journal of Advanced Concrete Technology, v. 11, n. 1 ( 2013).
- (2013): Predicting the Creep Strain of PVA-ECC at High Stress Levels based on the Evolution of Plasticity and Damage. In: Journal of Advanced Concrete Technology, v. 11, n. 2 ( 2013).
- (2008): Shear Fatigue Response of Cracked Concrete Interface. In: Journal of Advanced Concrete Technology, v. 6, n. 2 ( 2008).
- (2008): Shear Fatigue Simulation of RC Beams Subjected to Fixed Pulsating and Moving Loads. In: Journal of Advanced Concrete Technology, v. 6, n. 1 ( 2008).
- (2005): Simulation of Coupled Corrosive Product Formation, Migration into Crack and Propagation in Reinforced Concrete Sections. In: Journal of Advanced Concrete Technology, v. 3, n. 2 ( 2005).
- (2006): RC pile–soil interaction analysis using a 3D-finite element method with fibre theory-based beam elements. In: Earthquake Engineering and Structural Dynamics, v. 35, n. 13 (25 October 2006).
- (2006): Seismic analysis of underground reinforced concrete structures considering elasto-plastic interface element with thickness. In: Engineering Structures, v. 28, n. 8 (July 2006).
- (2004): Pre- and Postyield Finite Element Method Simulation of Bond of Ribbed Reinforcing Bars. In: Journal of Structural Engineering (ASCE), v. 130, n. 4 (April 2004).
- (2018): Remaining fatigue life assessment of in-service road bridge decks based upon artificial neural networks. In: Engineering Structures, v. 171 (September 2018).
- (2016): Scale-Dependent ASR Expansion of Concrete and Its Prediction coupled with Silica Gel Generation and Migration. In: Journal of Advanced Concrete Technology, v. 14, n. 8 ( 2016).
- (2002): Reinforcement Stability and Fracture of Cover Concrete in Reinforced Concrete Members. In: Journal of Structural Engineering (ASCE), v. 128, n. 10 (October 2002).
Structurae cooperates with
