Zhongguo John Ma 
-
: Mechanical properties of
CFRP and shrinkage compensating concrete actively confined and strengthened short columns under freeze–thaw cycles. In: Structural Concrete. - (2025): Experimental study on seismic performance of GFRP and highly ductile stainless steel hybrid reinforced concrete columns. In: Engineering Structures, v. 322 (January 2025).
- (2024): Interpretable Machine Learning Models for Prediction of UHPC Creep Behavior. In: Buildings, v. 14, n. 7 (2 July 2024).
- (2024): Lateral resistances of RC shear walls controlled by shear and sliding failure modes under axial tension. In: Engineering Structures, v. 318 (November 2024).
- (2023): A lode-dependent plasticity model for high-strength structural steel. In: Journal of Constructional Steel Research, v. 211 (December 2023).
- (2023): An Explicit Approach for Determining the Rational Length of Steel Portion in Steel–Concrete Hybrid Girder Bridges. In: Journal of Bridge Engineering (ASCE), v. 28, n. 1 (January 2023).
- (2022): Experimental and numerical investigations on shear performance of key tooth joints of precast concrete segmental bridge under repeated loading. In: Construction and Building Materials, v. 351 (October 2022).
- (2022): Experimental and numerical investigations on shear behavior of large keyed tooth joints. In: Construction and Building Materials, v. 344 (August 2022).
- (2019): Fatigue flexural analysis of concrete beams reinforced with hybrid GFRP and steel bars. In: Engineering Structures, v. 199 (November 2019).
- (2015): Improved definition of dynamic load allowance factor for highway bridges. In: Structural Engineering and Mechanics, v. 54, n. 3 (May 2015).
- (2021): Experimental Study on Behavior and Failure Mode of PSRC Bridge Pier under Close-In Blast Loading. In: Journal of Bridge Engineering (ASCE), v. 26, n. 2 (February 2021).
- (2020): Influence of mineralogical and chemical compositions on alkali-silica-reaction of Tennessee limestones. In: Construction and Building Materials, v. 261 (November 2020).
- (2017): Experimental investigation on long term flexural performance of expansive concrete beams eccentrically reinforced by CFRP. In: Composite Structures, v. 163 (March 2017).
- (2020): Improving the Interfacial Bond Properties of the Carbon Fiber Coated with a Nano-SiO2 Particle in a Cement Paste Matrix. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2020): Frost resistance of fiber-reinforced blended slag and Class F fly ash-based geopolymer concrete under the coupling effect of freeze-thaw cycling and axial compressive loading. In: Construction and Building Materials, v. 250 (July 2020).
- (2019): Freeze-thaw resistance of Class F fly ash-based geopolymer concrete. In: Construction and Building Materials, v. 222 (October 2019).
- (2019): Flexural behavior of prestressed CFRP reinforced concrete beams by two different tensioning methods. In: Engineering Structures, v. 189 (June 2019).
- (2019): Influence of masonry infills on seismic response of RC frames under low frequency cyclic load. In: Engineering Structures, v. 183 (March 2019).
- (2016): Investigation of using recycled powder from waste of clay bricks and cement solids in reactive powder concrete. In: Construction and Building Materials, v. 113 (June 2016).
- (2017): Flexural behavior of expansive concrete beams reinforced with hybrid CFRP enclosure and steel rebars. In: Construction and Building Materials, v. 150 (September 2017).
- (2017): Fatigue behavior of naturally corroded plain reinforcing bars. In: Construction and Building Materials, v. 152 (October 2017).
- (2017): Hysteretic model of SRUHSC column and SRC beam joints considering damage effects. In: Materials and Structures, v. 50, n. 1 (February 2017).
- (2015): Interfacial Behavior of RC Beams Strengthened with FRP under Fatigue Loading. In: Advances in Structural Engineering, v. 18, n. 2 (February 2015).
- (2016): Interface Behavior between Steel and Concrete Connected by Bonding. In: Journal of Bridge Engineering (ASCE), v. 21, n. 6 (June 2016).
- (2013): Longitudinal Joints with Accelerated Construction Features in Decked Bulb-Tee Girder Bridges: Strut-and-Tie Model and Design Guidelines. In: Journal of Bridge Engineering (ASCE), v. 18, n. 5 (May 2013).
- (2012): Fatigue Evaluation of Longitudinal U-Bar Joint Details for Accelerated Bridge Construction. In: Journal of Bridge Engineering (ASCE), v. 17, n. 2 (March 2012).
- (2012): Fatigue Evaluation of Transverse U-Bar Joint Details for Accelerated Bridge Construction. In: Journal of Bridge Engineering (ASCE), v. 17, n. 2 (March 2012).
- (2010): Improved Longitudinal Joint Details in Decked Bulb Tees for Accelerated Bridge Construction: Fatigue Evaluation. In: Journal of Bridge Engineering (ASCE), v. 15, n. 5 (September 2010).
- (2018): Flexural response of high-strength steel-ultra-high-performance fiber reinforced concrete beams based on a mesoscale constitutive model: Experiment and theory. In: Structural Concrete, v. 19, n. 3 (June 2018).
- (2016): Full-scale lateral impact testing of prestressed concrete girder. In: Structural Concrete, v. 17, n. 6 (December 2016).
Structurae cooperates with
