Kunlin Ma 
- (2024): A Comprehensive Study on the Impact of Direct Electric Curing on the Performance of Molybdenum Tailings in Cementitious Materials. In: Case Studies in Construction Materials, v. 21 (December 2024).
- (2024): Influence of Molybdenum Tailings Powder on the Hydration Characteristics of Cement Paste. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 6 (June 2024).
- (2023): Effect of low temperature calcined electrolytic manganese residue on the early-age hydration of cement paste. In: Construction and Building Materials, v. 387 (July 2023).
- (2023): Multiscale mechanical evolution of the interface between self-compacting concrete and steam-cured concrete. In: Journal of Building Engineering, v. 73 (August 2023).
- (2023): Microstructure characteristics and evolution of the bonding interface between SCC and steam-cured concrete. In: Construction and Building Materials, v. 400 (October 2023).
- (2023): Hydration kinetics analysis of cementitious paste composites produced by binary and ternary binder materials for potential use in massive concrete structures. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2023): Effect of alternating current curing on properties of carbon black-cement conductive composite: Setting, hydration and microstructure. In: Journal of Building Engineering, v. 72 (August 2023).
- (2023): Mechanical properties and crack evolution of SCC with macro-crack under freeze-thaw cycles. In: Journal of Building Engineering, v. 69 (June 2023).
- (2023): Experimental and finite element investigations on hydration heat and early cracks in massive concrete piers. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2023): Influence of CO2 enhancement of recycled aggregate on microstructure of ITZs in recycled concrete. In: Journal of Building Engineering, v. 65 (April 2023).
- (2023): Influence of recycled concrete aggregate enhancement methods on the change of microstructure of ITZs in recycled aggregate concrete. In: Construction and Building Materials, v. 371 (March 2023).
- (2023): Influence of direct electric curing on the hydration and microstructure of cement paste excluding ohmic heating. In: Construction and Building Materials, v. 369 (March 2023).
- (2022): Influence of rapid curing methods on concrete microstructure and properties: A review. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2022): Finite element analysis on properties evolution of slab track FLC under the coupling action of rainfall and fatigue load. In: Engineering Structures, v. 271 (November 2022).
- (2022): Experimental study on dynamic and static structure establishment and recovery rate of fresh cement paste by composite thickening agents. In: Construction and Building Materials, v. 343 (August 2022).
- (2022): Effects of intense ultraviolet irradiation on drying shrinkage and microstructural characteristics of cement mortar. In: Construction and Building Materials, v. 347 (September 2022).
- (2022): Experimental investigation on flexural and compressive toughness of mortar and concrete with hybrid toughening materials. In: Structures, v. 43 (September 2022).
- (2021): Hydration and multiscale pore structure characterization of steam-cured cement paste investigated by X-ray CT. In: Construction and Building Materials, v. 282 (May 2021).
- (2021): The morphological characteristics of brick-concrete recycled coarse aggregate based on the digital image processing technique. In: Journal of Building Engineering, v. 44 (December 2021).
- (2021): Experimental investigation on mechanical strength and microstructure of cement paste by electric curing with different voltage and frequency. In: Construction and Building Materials, v. 299 (September 2021).
- (2021): Effect of Packing Density According to CPM on the Rheology of Cement–Fly Ash–Slag Paste. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 8 (August 2021).
- (2021): Mechanical evolutionary behavior of steam‐cured concrete under the coupling effect of flexural fatigue and minus temperature. In: Structural Concrete, v. 22, n. 5 (September 2021).
- (2022): The improved mix design method of pervious concrete based on slurry layer thickness. In: Magazine of Concrete Research, v. 74, n. 2 (January 2022).
- (2020): Performance Evolution and Damage Constitutive Model of Thin Layer SCC under the Coupling Effect of Freeze–Thaw Cycles and Load. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 6 (June 2020).
- (2021): Influence of workability parameters and filling time on the quality of SCC filling layer. In: Magazine of Concrete Research, v. 73, n. 12 (June 2021).
- (2019): Effects of Freeze and Cyclic Load on Impact Resistance of Filling Layer Self-Compacting Concrete (FLSCC). In: KSCE Journal of Civil Engineering, v. 23, n. 7 (April 2019).
- (2019): Effects of freeze and cyclic flexural load on mechanical evolution of filling layer self-compacting concrete. In: Construction and Building Materials, v. 200 (March 2019).
- (2016): Effects of mineral admixtures on shear thickening of cement paste. In: Construction and Building Materials, v. 126 (November 2016).
- (2017): Improved mix design method of self-compacting concrete based on coarse aggregate average diameter and slump flow. In: Construction and Building Materials, v. 143 (July 2017).
- (2018): Development of High-Performance Self-Compacting Concrete Applied as the Filling Layer of High-Speed Railway. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 2 (February 2018).
Structurae cooperates with
