Hongwei Ma 
- (2025): Active vibration control of functionally graded graphene nanoplatelets reinforced composite plates with piezoelectric layers under multi-order excitation. In: Engineering Structures, v. 322 (January 2025).
- (2024): Frequency trajectory and modal analysis of variable stiffness composite cylindrical shells with flange. In: Composite Structures, v. 344 (September 2024).
- (2024): Study on In-plane Mechanical Performance of Poplar LVL Orthogonal Rib-beam Floor. In: Case Studies in Construction Materials, v. 21 (December 2024).
- (2024): Coupled vibration analysis of bolted variable angle tow plates under combined nonlinear effects. In: Composite Structures, v. 330 (February 2024).
- (2023): Coupled vibration of an annular plate-cylindrical drum structure with material-nonlinearity damping patches considering position-mistuned and stiffness-mistuned connections. In: Composite Structures, v. 321 (October 2023).
- (2023): Dynamic modeling and vibration analysis of planar pipeline with partial constrained layer damping treatment: Theoretical and experimental studies. In: Composite Structures, v. 323 (November 2023).
- (2023): Linear and nonlinear guided wave based debonding monitoring in CFRP-reinforced steel structures. In: Construction and Building Materials, v. 400 (October 2023).
- (2023): Finite element modeling of straight pipeline with partially attached viscoelastic damping patch based on variable thickness laminated element. In: Composite Structures, v. 314 (June 2023).
- (2023): Analysis of ultrasonic nonlinearity for bolt hole crack detection in rail joints by wavelet packet decomposition. In: Advances in Structural Engineering, v. 26, n. 8 (March 2023).
- (2024): Application of chaotic information entropy for ultrasonic guided wave detection in pipe. In: Journal of Civil Structural Health Monitoring, v. 14, n. 1 (January 2024).
- (2022): Pattern Matching-Based Structural Damage Identification Using Mode Shape Difference Ratio with Limited Sensors. In: International Journal of Structural Stability and Dynamics, v. 23, n. 9 (December 2022).
- (2022): An Experimental Study of an SMA-Based Self-Centering Damper. In: International Journal of Steel Structures, v. 22, n. 2 (25 March 2022).
- (2022): Damage detection in bridges under moving loads based on subspace projection residuals. In: Advances in Structural Engineering, v. 25, n. 5 (February 2022).
- (2021): Seismic collapse resistance performance on out-jacketing frames with concrete-encased CFST columns for adding storeys. In: Structures, v. 33 (October 2021).
- (2019): Bridge condition monitoring under moving loads using two sensor measurements. In: Structural Health Monitoring, v. 19, n. 3 (June 2019).
- (2020): Investigation on interface fracture properties and nonlinear fracture model between ECC and concrete subjected to salt freeze-thaw cycles. In: Construction and Building Materials, v. 259 (October 2020).
- (2021): Derivation of circumferential guided waves equations for a multilayered laminate composite hollow cylinder by state-vector and Legendre polynomial hybrid formalism. In: Composite Structures, v. 255 (January 2021).
- (2020): Analysis on Fracture Behavior and Optimization of Beam-Column Connections with Expanded Flanges of Steel Frames. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2020): Monitoring of Bending Stiffness of BFRP Reinforced Concrete Beams Using Piezoceramic Transducer Enabled Active Sensing. In: Smart Materials and Structures, v. 29, n. 10 (August 2020).
- (2020): Design of a skeleton-stabilized warm mix asphalt mixture and investigation of its fatigue and fracture performance. In: Construction and Building Materials, v. 248 (July 2020).
- (2020): Bridge condition monitoring using fixed moving principal component analysis. In: Structural Control and Health Monitoring, v. 27, n. 6 (June 2020).
- (2019): Structural damage detection using wavelet packet transform combining with principal component analysis. In: International Journal of Lifecycle Performance Engineering, v. 3, n. 2 ( 2019).
- (2011): Experimental study on two types of new beam-to-column connections. In: Steel and Composite Structures, v. 11, n. 4 (July 2011).
- (2019): Behaviour and Modeling of the Bearing Capacity of Shear Stud Connectors. In: International Journal of Steel Structures, v. 19, n. 2 ( 2019).
- (2019): Serviceability of one-way high-volume fly ash-self-compacting concrete slabs reinforced with basalt FRP bars. In: Construction and Building Materials, v. 217 (August 2019).
- (2011): Modelling of a self-centring damper and its application in structural control. In: Journal of Constructional Steel Research, v. 67, n. 4 (April 2011).
- (2011): Experimental study of the strength and behaviour of reinforced coped beams. In: Journal of Constructional Steel Research, v. 67, n. 11 (November 2011).
- (2008): A numerical study on bolted end-plate connection using shape memory alloys. In: Materials and Structures, v. 41, n. 8 (October 2008).
- (2007): Feasibility study on a self-centering beam-to-column connection by using the superelastic behavior of SMAs. In: Smart Materials and Structures, v. 16, n. 5 (October 2007).
- (2018): Numerical study on static component generation from the primary Lamb waves propagating in a plate with nonlinearity. In: Smart Materials and Structures, v. 27, n. 4 (April 2018).
Structurae cooperates with
