Baoguo Ma
- (2024): Hydration mechanism of a sodium-doped phosphogypsum-based hemihydrate whisker (omongwaite) in supersulfated cement system. In: Construction and Building Materials, v. 427 (May 2024).
- (2023): Impact of calcium sulfoaluminate cement on printability and early strength development of a slag-based 3D printing cementitious material. In: Construction and Building Materials, v. 404 (November 2023).
- (2023): Improving the volume stability of the β-hemihydrate phosphogypsum – Cement system by incorporating GGBS. In: Construction and Building Materials, v. 408 (December 2023).
- (2024): Enhancement and mechanism of macro-defect free (MDF) gypsum water resistance achieved by hydrophobic modification. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2023): Influence of H3PO4 and H2PO4− on the performance of PCE in hemihydrate gypsum pastes. In: Construction and Building Materials, v. 394 (August 2023).
- (2022): Improving the mechanical property and water resistance of β-hemihydrate phosphogypsum by incorporating ground blast-furnace slag and steel slag. In: Construction and Building Materials, v. 344 (August 2022).
- (2022): Influence of fluoride ion on the performance of PCE in hemihydrate gypsum pastes. In: Journal of Building Engineering, v. 46 (April 2022).
- (2022): Effect of tricalcium aluminate and nano silica on performance of hemihydrate gypsum. In: Construction and Building Materials, v. 321 (February 2022).
- (2022): Mechanical properties and hydration process of steel slag-cement binder containing nano-SiO2. In: Construction and Building Materials, v. 314 (January 2022).
- (2021): On-demand setting of extrusion-based 3D printing gypsum using a heat-induced accelerator. In: Construction and Building Materials, v. 304 (October 2021).
- (2021): Hydration and mechanical properties of cement-marble powder system incorporating triisopropanolamine. In: Construction and Building Materials, v. 266 (January 2021).
- (2020): Low-Energy Consumption Preparation of Fine Waterproof Cementitious Material with High-Volume Phosphogypsum. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 11 (November 2020).
- (2020): Effect of triisopropanolamine on chloride binding of cement paste with ground-granulated blast furnace slag. In: Construction and Building Materials, v. 256 (September 2020).
- (2018): Effect of triisopropanolamine on compressive strength and hydration of cement-fly ash paste. In: Construction and Building Materials, v. 179 (August 2018).
- (2018): Influence of steam curing and nano silica on hydration and microstructure characteristics of high volume fly ash cement system. In: Construction and Building Materials, v. 171 (May 2018).
- (2018): Improvement in fluidity loss of magnesia phosphate cement by incorporating polycarboxylate superplasticizer. In: Construction and Building Materials, v. 165 (March 2018).
- (2018): Improvement in compatibility of polycarboxylate superplasticizer with poor-quality aggregate containing montmorillonite by incorporating polymeric ferric sulfate. In: Construction and Building Materials, v. 162 (February 2018).
- (2020): Investigation of silica fume as foam cell stabilizer for foamed concrete. In: Construction and Building Materials, v. 237 (March 2020).
- (2020): Modeling the microstructure at steel–concrete interface in reinforced concrete. In: Structural Concrete, v. 21, n. 3 (June 2020).
- (2020): Effects of amorphous aluminum hydroxide on chloride immobilization in cement-based materials. In: Construction and Building Materials, v. 231 (January 2020).
- (2011): Effects of Temperature on the Performance of Sucrose in Cement Hydration. In: Journal of Materials in Civil Engineering (ASCE), v. 23, n. 7 (July 2011).
- (2016): Influence of nano-TiO2 on physical and hydration characteristics of fly ash–cement systems. In: Construction and Building Materials, v. 122 (September 2016).
- (2016): Mechanical and hydration characteristics of autoclaved aerated concrete (AAC) containing iron-tailings: Effect of content and fineness. In: Construction and Building Materials, v. 128 (December 2016).
- (2017): Influence of Ca/Si ratio of concrete pore solution on thaumasite formation. In: Construction and Building Materials, v. 153 (October 2017).
- (2015): Managing Zn wastes in C3S: comparison of two incorporation methods. In: Materials and Structures, v. 48, n. 8 (August 2015).
- (2009): Manufacturing technique and performance of functionally graded concrete segment in shield tunnel. In: Frontiers of Architecture and Civil Engineering in China, v. 3, n. 1 (January 2009).
- (2018): Effect of triisopropanolamine on compressive strength and hydration of steaming-cured cement-fly ash paste. In: Construction and Building Materials, v. 192 (December 2018).
- (2017): Improvement of Polyethylene Glycol in Compatibility with Polycarboxylate Superplasticizer and Poor-Quality Aggregates Containing Montmorillonite. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 9 (September 2017).
- (2017): Effect of the Adsorbing Behavior of Phosphate Retarders on Hydration of Cement Paste. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 9 (September 2017).
- (2002): Neural Network Analysis of Chloride Diffusion in Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 14, n. 4 (August 2002).
Structurae cooperates with
