Qi Luo 
- (2024): Evaluating bonding strength in UHPC-NC composite: A comprehensive review of direct and indirect characterization methods. In: Construction and Building Materials, v. 443 (September 2024).
- (2024): Exploring the influence of calcined clay grade on the rheological dynamics of LC3 mortar. In: Construction and Building Materials, v. 444 (September 2024).
- (2024): A novel thermal-tailored strategy to mitigate thermal cracking of cement-based materials by carbon fibers and liquid-metal-based microencapsulated phase change materials. In: Construction and Building Materials, v. 428 (May 2024).
- (2024): Integrated use of Bayer red mud and electrolytic manganese residue in limestone calcined clay cement (LC3) via thermal treatment activation. In: Journal of Building Engineering, v. 94 (October 2024).
- (2024): Effect of CaO/Na2SiO3 ratio on mechanical properties, microstructures and environmental leaching characteristics of neutralization slag based geopolymers. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Exploring synergistic effects and hydration mechanisms in metakaolin-blended cement system with varying metakaolin and wollastonite content. In: Construction and Building Materials, v. 425 (April 2024).
- (2024): Strength development and polymerization reaction mechanism of sulfur-tailings-based geopolymer produced with CaO and Na2SiO3 composite activator. In: Construction and Building Materials, v. 421 (March 2024).
- (2024): Re-using excavated rock from underground tunneling activities to develop eco-friendly ultrahigh performance concrete. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2024): Microstructural damage characterization of NC-UHPC composite under salt freeze-thaw cycles based on ex-situ X-ray computed tomography. In: Construction and Building Materials, v. 414 (February 2024).
- (2023): Influence of flaw distribution on tensile behavior of Engineered Cementitious Composites (ECC) based on flaw probability model. In: Construction and Building Materials, v. 402 (October 2023).
- (2023): A prediction model of the tensile properties of engineered cementitious composites (ECC) based on the continuous crack tracking algorithm. In: Journal of Building Engineering, v. 79 (November 2023).
- (2023): Reduce the cost and embodied carbon of ultrahigh performance concrete using waste clay. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2023): The influence of moisture and epoxy bonding agents on interfacial behavior between normal concrete substrate and ultrahigh performance concrete as a repair material: Experimental and molecular dynamics study. In: Construction and Building Materials, v. 372 (April 2023).
- (2023): Molecular simulation of calcium-silicate-hydrate and its applications: A comprehensive review. In: Construction and Building Materials, v. 409 (December 2023).
- : Experimental investigation on the deformation coordination between an optical fibre and backfilling sand of borehole. In: Proceedings of the Institution of Civil Engineers - Geotechnical Engineering.
- (2023): Evaluation of mechanical properties and abrasion resistance of PAN fiber-reinforced sulfoaluminate cement composites. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2023): Lithium slag-based geopolymer synthesized with hybrid solid activators. In: Construction and Building Materials, v. 365 (February 2023).
- (2022): Influence of substrate moisture on the interfacial bonding between calcium silicate hydrate and epoxy. In: Construction and Building Materials, v. 320 (February 2022).
- (2022): Investigating the effect of polycarboxylate-ether based superplasticizer on the microstructure of cement paste during the setting process. In: Case Studies in Construction Materials, v. 16 (June 2022).
- (2022): Effect of a specific PCE superplasticizer on the initial dissolution and early hydration of Portland cement. In: Journal of Building Engineering, v. 46 (April 2022).
- (2021): Influence of PCE-type GA on cement hydration performances. In: Construction and Building Materials, v. 302 (October 2021).
- (2021): Research on Deformation Prediction of Foundation Pit Based on PSO-GM-BP Model. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2021): Probabilistic seismic performance assessment of timber-steel hybrid structures subjected to mainshock-aftershock sequences. In: Soil Dynamics and Earthquake Engineering, v. 141 (February 2021).
- (2020): Experimental and Analytical Study on Deformation Behavior in Hogging Moment Regions of Composite Beams. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2020): Mechanical Properties of Microsteel Fiber Reinforced Concrete and Its Gradient Design in the Partially Reinforced RC Beam. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2021): Properties and microstructure of lithium-slag-based geopolymer by one-part mixing method. In: Construction and Building Materials, v. 273 (March 2021).
- (2021): Structural Damage Evaluation of Multistory Timber–Steel Hybrid Structures through Shake Table Tests. In: Journal of Performance of Constructed Facilities (ASCE), v. 35, n. 1 (February 2021).
- (2021): Improvement of early age properties of Portland cement by a ternary hardening accelerating admixture. In: Magazine of Concrete Research, v. 73, n. 4 (February 2021).
- (2019): Aggregated chain morphological variation analysis of magnetorheological fluid (MRF) in squeeze mode. In: Smart Materials and Structures, v. 28, n. 10 (29 August 2019).
- (2018): Seismic performance evaluation of timber-steel hybrid structure through large-scale shaking table tests. In: Engineering Structures, v. 175 (November 2018).
Structurae cooperates with
