Kai Luo 
- (2024): The leaching model and leaching kinetics of lithium slag in alkaline solution. In: Construction and Building Materials, v. 432 (June 2024).
- (2024): Leaching kinetics and dissolution model of steel slag in NaOH solution. In: Construction and Building Materials, v. 434 (July 2024).
- (2024): Leaching kinetics and reactivity regulation of red mud in an NaOH solution. In: Construction and Building Materials, v. 421 (March 2024).
- (2023): Recycled mineral admixtures based on recycled clay brick. In: Journal of Building Engineering, v. 76 (October 2023).
- (2024): Research on the flexural buckling behavior of the cold-formed steel back-to-back built-up columns with Σ-section. In: Engineering Structures, v. 302 (March 2024).
- (2023): Utilization of Carbide Slag in Autoclaved Aerated Concrete Preparation. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 12 (December 2023).
- (2024): Axial compressive behavior of cold-formed steel built-up box-shape columns with longitudinal stiffeners. In: Journal of Constructional Steel Research, v. 212 (January 2024).
- (2023): Rheological and early hydration of cementitious material containing recycled concrete powders collected from recycled aggregates. In: Construction and Building Materials, v. 393 (August 2023).
- (2023): Mechanical properties of the composite lattice structure with variable density and multi-configuration. In: Composite Structures, v. 304 (January 2023).
- (2022): Effects of steel slag on the early hydration of hydraulic lime. In: Materials and Structures, v. 55, n. 9 (20 October 2022).
- (2023): Properties of Natural Hydraulic Lime Prepared from Calcite Tailings. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 2 (February 2023).
- (2022): Thermal deformation and microstructure characteristics of low-heat Portland cement-based concrete in a high plateau environment. In: Journal of Building Engineering, v. 58 (October 2022).
- (2021): Preparation and performances of foamed hydraulic lime. In: Construction and Building Materials, v. 290 (July 2021).
- : Application of Edge Detection Based on Hexagonal Image Structure to Delamination Detection of Carbon Fiber Reinforced Polymer Material. In: Smart Materials and Structures.
- (2022): Application of Edge Detection Based on Hexagonal Image Structure to Delamination Detection of Carbon Fiber Reinforced Polymer Material. In: Smart Materials and Structures, v. 31, n. 4 (February 2022).
- (2022): Performance of hydraulic lime by using carbide slag. In: Journal of Building Engineering, v. 51 (July 2022).
- (2022): Enhanced Probabilistic Spatiotemporal Wind Speed Forecasting Based on Deep Learning, Quantile Regression, and Error Correction. In: Journal of Energy Engineering, v. 148, n. 2 (April 2022).
- (2020): Effect of hydrated lime on structures and properties of decorative rendering mortar. In: Construction and Building Materials, v. 256 (September 2020).
- (2020): Influence of nano-SiO2 and carbonation on the performance of natural hydraulic lime mortars. In: Construction and Building Materials, v. 235 (February 2020).
- (2016): Long-term structural analysis and stability assessment of three-pinned CFST arches accounting for geometric nonlinearity. In: Steel and Composite Structures, v. 20, n. 2 ( 2016).
- (2019): Effect of nano-SiO2 on early hydration of natural hydraulic lime. In: Construction and Building Materials, v. 216 (August 2019).
- (2015): Investigation into long-term behaviour and stability of concrete-filled steel tubular arches. In: Journal of Constructional Steel Research, v. 104 (January 2015).
- (2019): Preparation and properties of nanopore-rich lightweight cement paste based on swelled bentonite. In: Construction and Building Materials, v. 199 (February 2019).
Structurae cooperates with
