Yingcheng Luan
- (2024): Design and evaluation of semi self-compacting cold mix polyurethane mixture for steel bridge deck pavement. In: Construction and Building Materials, v. 419 (March 2024).
- (2023): Experimental investigation on the mechanical performance and microscopic characterization of desulfurization gypsum-reinforced ternary geopolymer. In: Construction and Building Materials, v. 392 (August 2023).
- (2023): Effect of existing pavement condition and overlaying strategy on the reflective cracking resistance of asphalt pavement. In: Construction and Building Materials, v. 401 (October 2023).
- (2023): Research on the effects of asphalt performance on rutting resistance and its correlation with rutting performance indicators. In: Construction and Building Materials, v. 400 (October 2023).
- (2024): Study on mechanical properties of composite support structures in TBM tunnel under squeezing soft rock conditions. In: Tunnelling and Underground Space Technology, v. 144 (February 2024).
- (2023): Modification mechanism of flue gas desulfurization gypsum on fly ash and ground granulated blast-furnace slag alkali-activated materials: Promoting green cementitious material. In: Construction and Building Materials, v. 396 (September 2023).
- (2023): Investigation on the effects of physical property and stress state of graded crushed stone on resilient modulus and permanent deformation. In: Construction and Building Materials, v. 400 (October 2023).
- (2023): Research on strength improvement and stabilization mechanism of organic polymer stabilizer for clay soil of subgrade. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2023): Research on key influencing factors of scrap tire-soil retaining wall. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2022): Molecular dynamics simulation on cohesion and adhesion properties of the emulsified cold recycled mixtures. In: Construction and Building Materials, v. 333 (May 2022).
- (2022): Compaction performance of cold recycled asphalt mixture using SmartRock sensor. In: Automation in Construction, v. 140 (August 2022).
- (2019): Study on Bearing Mechanism and Coupling Mechanism of Steel Arch-concrete Composite Structure of Initial Support System of Large Section Tunnel. In: Geotechnical and Geological Engineering, v. 37, n. 6 (10 August 2019).
- (2022): Mechanical Property Evaluation for Steel Slag in Asphalt Mixture with Different Skeleton Structures Using Modified Marshall Mix Design Methodology. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 1 (January 2022).
- (2021): Multilevel Analysis of the Aging Mechanisms and Performance Evolution of Rubber-Modified Asphalt. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 12 (December 2021).
- (2021): Experimental and numerical research on fabricated joint for CFST set in underground construction. In: Structures, v. 34 (December 2021).
- (2021): Mechanized construction of fabricated arches for large-diameter tunnels. In: Automation in Construction, v. 124 (April 2021).
- (2020): Performance Characterization of Recycled-Asphalt Pavement with Stabilized Rubber–Modified Asphalt Using Balanced Mix Design Method. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 12 (December 2020).
- (2019): Study on key technology of tunnel fabricated arch and its mechanical mechanism in the mechanized construction. In: Tunnelling and Underground Space Technology, v. 83 (January 2019).
Structurae cooperates with
