Wei Lu 
- (2024): Experimental study on the mechanical properties of FRP reinforced shotcrete lining of tunnel in extremely fractured surrounding rock. In: Tunnelling and Underground Space Technology, v. 149 (July 2024).
- (2011): Design of screwed steel sheeting connection at ambient and elevated temperatures. In: Thin-Walled Structures, v. 49, n. 12 (December 2011).
- (2012): Behaviour of shear connectors in cold-formed steel sheeting at ambient and elevated temperatures. In: Thin-Walled Structures, v. 61 (December 2012).
- (2024): Behavior of fin-plate connection of a composite beam subjected to different fire scenarios. In: Rakenteiden Mekaniikka = Journal of Structural Mechanics, v. 57, n. 1 (27 March 2024).
- (2024): Failure law of floor during strip mining backfill with paste-tailings over confined aquifer: A case study in China mine. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2023): Cyclic performance of severely earthquake-damaged RC bridge columns repaired using grouted UHPC jacket. In: Engineering Structures, v. 280 (April 2023).
- (2022): Evaluating the mechanical behavior of post-tensioned recombinant bamboo frame with metal energy-dissipating connections. In: Structures, v. 46 (December 2022).
- (2022): Effect of crack width and wet-dry cycles on the chloride penetration resistance of engineered cementitious composite (ECC). In: Construction and Building Materials, v. 352 (October 2022).
- (2022): Development of an FEM-DEM Model to Investigate Preliminary Compaction of Asphalt Pavements. In: Buildings, v. 12, n. 7 (5 July 2022).
- (2022): Behaviour of vertically loaded steel beams under a travelling fire. In: Structures, v. 44 (October 2022).
- (2022): Exploring the Risk Transmission Characteristics Among Unsafe Behaviors Within Urban Railway Construction Accidents. In: Journal of Civil Engineering and Management, v. 28, n. 6 (27 May 2022).
- (2010): Fluid-structure interaction of submerged floating tunnel in wave field. In: Procedia Engineering, v. 4 ( 2010).
- (2013): Diagnosis and recovering on spatially distributed acceleration using consensus data fusion. In: Smart Structures and Systems, v. 12, n. 3-4 (September 2013).
- (2022): Coupled CFD-FE analysis of a long-span truss beam exposed to spreading fires. In: Engineering Structures, v. 259 (May 2022).
- (2022): An experimental assessment of ultra high performance concrete beam reinforced with negative Poisson’s ratio (NPR) steel rebar. In: Construction and Building Materials, v. 327 (April 2022).
- (2022): Behavior comparison of seven-types of steel–concrete composite stub columns under axial compression. In: Engineering Structures, v. 252 (February 2022).
- (2021): Application of a Stress-Fractional Model for Capturing the Stress-Strain Behavior of Granular Soils. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2021): Experimental and numerical research on fabricated joint for CFST set in underground construction. In: Structures, v. 34 (December 2021).
- (2021): The Effect of Steel Strength on the Behavior of a K‐Joint in a Slim‐floor Truss. In: ce/papers, v. 4, n. 2-4 (September 2021).
- (2021): Heat Transfer Analysis of U-Type Deep Borehole Heat Exchangers of Geothermal Energy. In: Energy and Buildings, v. 237 (April 2021).
- (2019): Acquisition of thermal field of spatial steel structure based on temperature measurements. In: International Journal of Lifecycle Performance Engineering, v. 3, n. 2 ( 2019).
- (2019): Diffusion and distribution of chloride ions in carbonated concrete with fly ash. In: Construction and Building Materials, v. 218 (September 2019).
- (2006): Fuzzy optimization of cold-formed steel sheeting using genetic algorithms. In: Journal of Constructional Steel Research, v. 62, n. 12 (December 2006).
- (2017): Analysis on Calculated Length for Buckling Stability of Steel Pipe Pile Based on Energy Method. In: The Open Civil Engineering Journal, v. 11, n. 1 (December 2017).
- (2013): Design of shot nailed steel sheeting connection at ambient and elevated temperatures. In: Engineering Structures, v. 49 (April 2013).
- (2018): Development of a tool to monitor static balance of construction workers for proactive fall safety management. In: Automation in Construction, v. 94 (October 2018).
- (2017): 10.04: Behaviour of plane frames of high strength steel in fire. In: ce/papers, v. 1, n. 2-3 (September 2017).
- (2018): Experimental Study on Bond-Slip Behavior of Bamboo Bolt-Modified Slurry Interface under Pull-Out Load. In: Advances in Civil Engineering, v. 2018 ( 2018).
- (2018): Experimental Research on Destruction Mode and Anchoring Performance of Carbon Fiber Phyllostachys pubescens Anchor Rod with Different Forms. In: Advances in Civil Engineering, v. 2018 ( 2018).
- (2018): Application of Ultra-High Performance Concrete in bridge engineering. In: Construction and Building Materials, v. 186 (October 2018).
Structurae cooperates with
