Mohammad Ali Lotfollahi-Yaghin 
- (2016): Static strength of doubler plate reinforced tubular T/Y-joints subjected to brace compressive loading: Study of geometrical effects and parametric formulation. In: Thin-Walled Structures, v. 107 (October 2016).
- (2016): Static strength of offshore tubular T/Y-joints reinforced with collar plate subjected to tensile brace loading. In: Thin-Walled Structures, v. 103 (June 2016).
- (2016): Static performance of doubler plate reinforced tubular T/Y-joints subjected to brace tension. In: Thin-Walled Structures, v. 108 (November 2016).
- (2017): Static capacity of tubular X-joints reinforced with collar plate subjected to brace compression. In: Thin-Walled Structures, v. 119 (October 2017).
- (2012): The development of fatigue design formulas for the outer brace SCFs in offshore three-planar tubular KT-joints. In: Thin-Walled Structures, v. 58 (September 2012).
- (2013): Reduced wavelet component energy-based approach for damage detection of jacket type offshore platform. In: Smart Structures and Systems, v. 11, n. 6 (June 2013).
- (2021): Stress concentration factors in steel tubular KT-connections with FRP-Wrapping under bending moments. In: Structures, v. 33 (October 2021).
- (2015): On the absolute maximum dynamic response of a beam subjected to a moving mass. In: Structural Engineering and Mechanics, v. 54, n. 1 (April 2015).
- (2021): Punching Shear Strength of Voided Slabs on the Elastic Bases. In: Iranian Journal of Science and Technology, Transactions of Civil Engineering, v. 45, n. 4 (September 2021).
- (2021): A Laboratory Study on the Flexural and Shear Behavior of RC Beams Retrofitted with Steel Fiber-Reinforced Self-compacting Concrete Jacket. In: Iranian Journal of Science and Technology, Transactions of Civil Engineering, v. 45, n. 4 (September 2021).
- (2013): Chord-side SCF distribution of central brace in internally ring-stiffened tubular KT-joints: A geometrically parametric study. In: Thin-Walled Structures, v. 70 (September 2013).
- (2011): Geometrical effect on SCF distribution in uni-planar tubular DKT-joints under axial loads. In: Journal of Constructional Steel Research, v. 67, n. 8 (August 2011).
- (2012): Geometrically parametric study of central brace SCFs in offshore three-planar tubular KT-joints. In: Journal of Constructional Steel Research, v. 71 (April 2012).
- (2016): Structural behavior of tubular T/Y-joints with collar plate under static in-plane bending. In: Journal of Constructional Steel Research, v. 123 (August 2016).
- (2016): Static strength of collar plate reinforced tubular T/Y-joints under brace compressive loading. In: Journal of Constructional Steel Research, v. 119 (March 2016).
- (2017): Static strength of doubler plate reinforced tubular T/Y-joints under in-plane bending load. In: Journal of Constructional Steel Research, v. 136 (September 2017).
- (2019): Calibration and Bias-Correction of the Steel Offshore Jacket Platform Models Using Experimental Data. In: Journal of Waterway, Port, Coastal, and Ocean Engineering, v. 145, n. 3 (May 2019).
- (2018): Structural behavior of tubular X-joints strengthened with collar plate under axially compressive load at elevated temperatures. In: Marine Structures, v. 61 (September 2018).
- (2018): Static strength of axially loaded tubular KT-joints at elevated temperatures: Study of geometrical effects and parametric formulation. In: Marine Structures, v. 61 (September 2018).
Structurae cooperates with
