Zhao Liu 
- : Ductility‐oriented design of UHPC T‐beams: Mechanical model and design recommendations. In: Structural Concrete.
- (2024): Bond-slip behavior of deformed rebar in grouted duct connection: Experiment, theoretical analysis and cohesive-zone element model. In: Construction and Building Materials, v. 421 (March 2024).
- (2023): Dynamic Metro Stations Importance Evaluation Based on Network Topology and Real-Time Passenger Flows. In: KSCE Journal of Civil Engineering, v. 27, n. 10 (September 2023).
- (2023): Analytical approach for bursting cracking analysis of post-tensioned anchorage zone. In: Structures, v. 52 (June 2023).
- (2023): Bearing capacity of concentric anchorage zones in post-tensioned members: A stress field solution. In: Structures, v. 50 (April 2023).
- (2023): Analytical solutions for thermal effects of suspension bridges based on a surrogate model with longitudinal restraint stiffness. In: Structures, v. 50 (April 2023).
- (2022): Dynamic Response Analysis of Super Shallow-Buried Rectangular Tunnel. In: Advances in Civil Engineering, v. 2022 (January 2022).
- (2022): A coupled adhesive-frictional model tailored for interfacial behaviors between UHPC and NC materials. In: Structures, v. 38 (April 2022).
- (2022): Bond Behaviors between UHPC and Normal-Strength Concrete: Experimental Investigation and Database Construction. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 1 (January 2022).
- (2021): Aesthetics and Torsional Rigidity Improvements of a Triple-Cable Suspension Bridge by Uniform Distribution of Dead Loads to Three Cables in the Transverse Direction. In: Journal of Bridge Engineering (ASCE), v. 26, n. 11 (November 2021).
- (2021): Circular-linear-linear probabilistic model based on vine copulas: An application to the joint distribution of wind direction, wind speed, and air temperature. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 215 (August 2021).
- (2021): Additional Shear Stresses in Webs of Segmental Concrete Bridges due to Anchorage of Cantilever Tendons. In: Journal of Bridge Engineering (ASCE), v. 26, n. 7 (July 2021).
- (2021): Effect of the main cable bending stiffness on flexural and torsional vibrations of suspension bridges: Analytical approach. In: Engineering Structures, v. 240 (August 2021).
- (2021): Crack-based serviceability assessment of post-tensioned segmental concrete box-girder bridges. In: Structures, v. 30 (April 2021).
- (2019): Analytical Solutions for Flexural Stress of One-way UHPC-NC Hybrid Slab. Presented at: IABSE Congress: The Evolving Metropolis, New York, NY, USA, 4-6 September 2019.
- (2019): An analytical algorithm for reasonable central tower stiffness in the three-tower suspension bridge with unequal-length main spans. In: Engineering Structures, v. 199 (November 2019).
- (2020): Analysis of suspension bridges in construction and completed status considering the pylon saddles. In: European Journal of Environmental and Civil Engineering, v. 26, n. 9 (December 2020).
- (2020): Decoupling of arch action and truss action in deep beams by strain energy. In: Structures, v. 26 (August 2020).
- (2020): Development of Strut-and-Tie Models Using Load Path in Structural Concrete. In: Journal of Structural Engineering (ASCE), v. 146, n. 5 (May 2020).
- (2019): Analytical methods for the assessment of hanger forces of a suspension bridge based on measured main cable configuration. In: Advances in Structural Engineering, v. 23, n. 7 (December 2019).
- (2016): Deformation analysis of a non-prismatic beam with corrugated steel webs in the elastic stage. In: Thin-Walled Structures, v. 109 (December 2016).
- (2020): Analytical Assessment of Main Cable Shape for Three-Pylon Suspension Bridge with Unequal Main-Span Lengths: Thermal Effect Consideration. In: Journal of Bridge Engineering (ASCE), v. 25, n. 1 (January 2020).
- (2019): Analytical Study of Uniform Thermal Effects on Cable Configuration of a Suspension Bridge during Construction. In: Journal of Bridge Engineering (ASCE), v. 24, n. 11 (November 2019).
- (2019): An analytical algorithm for the pylon saddle pushing stage and distance during the suspension bridge construction. In: Advances in Structural Engineering, v. 22, n. 15 (July 2019).
- (2019): Analytical Pushover Method and Hysteretic Modeling of Precast Segmental Bridge Piers with High-Strength Bars Based on Cyclic Loading Test. In: Journal of Structural Engineering (ASCE), v. 145, n. 7 (July 2019).
- (2018): Elastic-to-Plastic Strut-and-Tie Model for Deep Beams. In: Journal of Bridge Engineering (ASCE), v. 23, n. 4 (April 2018).
- (2017): Elastic-to-Plastic Strut-and-Tie Model for Concentric Anchorage Zones. In: Journal of Bridge Engineering (ASCE), v. 22, n. 10 (October 2017).
- (2017): Crack Propagation and Control in Concentric Posttensioned Anchorage Zones. In: Journal of Bridge Engineering (ASCE), v. 22, n. 10 (October 2017).
- (2018): Elastic-to-plastic strut-and-tie model for multianchorage zones. In: Structural Concrete, v. 19, n. 4 (August 2018).
- (2018): Comparison study on hysteretic energy dissipation and displacement components between cast-in-place and precast piers with high-strength bars. In: Structural Concrete, v. 19, n. 3 (June 2018).
Structurae cooperates with
