Yushi Liu 
- (2024): Influence of microwave curing on the early performance of heat-stored LC3 composites. In: Journal of Building Engineering, v. 95 (October 2024).
- (2024): Curing parameters development and long-term performance of ohmic heating cured conductive cementitious composites: A comparative study on fiber fraction. In: Journal of Building Engineering, v. 91 (August 2024).
- (2024): Electrical performance of conductive cementitious composites under different curing regimes: Enhanced conduction by carbon fibers towards self-sensing function. In: Construction and Building Materials, v. 421 (March 2024).
- (2024): Absorbing effect of air entraining agent on early frost expansion of mortar: Calculation model and application. In: Construction and Building Materials, v. 415 (February 2024).
- (2023): Enabling superior thermo-mechanical performance of hydrated salt-based phase change energy storage cementitious composite using graphene oxide reinforced micro-interface. In: Journal of Building Engineering, v. 76 (October 2023).
- (2023): Internal structural evolution of conductive cementitious composites subjected to multi-step ohmic heating curing strategy under severely cold temperature. In: Journal of Building Engineering, v. 80 (December 2023).
- (2024): Ohmic heating curing of carbon fiber concrete beam in realistic cold weather: The influence of electrically insulated steel rebars. In: Construction and Building Materials, v. 411 (January 2024).
- (2023): Performance Evolution and Chloride Adsorption Efficiency of Seawater Mixed Cement-Based Materials Subjected to Ohmic Heating Curing under a Severely Cold Environment. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 12 (December 2023).
- (2023): Effect of stirrup arrangements on electrical and heating performances of electric activation manufactured concrete beam: Simulation and experimental investigation. In: Journal of Building Engineering, v. 78 (November 2023).
- (2023): Bending behavior of strain hardening cementitious composites based on the combined fiber-interface constitutive model. In: Computers & Structures, v. 281 (June 2023).
- (2023): Electric activation curing behaviour of reinforced concrete beam under severely-cold environment: Breakthrough of rapid concrete manufacturing at cold region. In: Construction and Building Materials, v. 384 (June 2023).
- (2023): Effect of coarse aggregate grading optimization on temperature, thermal stress and compressive strength of carbon fiber-reinforced concrete by ohmic heating curing. In: Journal of Building Engineering, v. 66 (May 2023).
- (2022): Gradient power modified ohmic heating curing to prepare hybrid carbon fibers/high performance concrete under deep-freeze low temperature. In: Construction and Building Materials, v. 330 (May 2022).
- (2021): Early frost resistance and permeability properties of carbon fiber/cement-based composite cured by ohmic heating under ultra-low temperature. In: Construction and Building Materials, v. 282 (May 2021).
- (2022): Urban "Three States" Human Settlements High-Quality Coordinated Development. In: Buildings, v. 12, n. 2 (18 January 2022).
- (2021): Experimental Research on Thermomechanical Properties of Thermal Energy Storage Cement Mortar Incorporated with Phase-Change Material. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2021): Thermal and mechanical properties of ultra-high performance concrete incorporated with microencapsulated phase change material. In: Construction and Building Materials, v. 273 (March 2021).
- (2020): Prediction for temperature evolution and compressive strength of non-mass concrete with thermal insulation curing in cold weather. In: Journal of Building Engineering, v. 32 (November 2020).
- (2020): BSE-based dispersion quantification of carbon fibres in cementitious composite through FCM-CA approach. In: Construction and Building Materials, v. 260 (November 2020).
- (2020): Effect of calcium oxide on mechanical properties and microstructure of alkali-activated slag composites at sub-zero temperature. In: Journal of Building Engineering, v. 32 (November 2020).
- (2020): Preparation of waste cooking oil emulsion as shrinkage reducing admixture and its potential use in high performance concrete: Effect on shrinkage and mechanical properties. In: Journal of Building Engineering, v. 32 (November 2020).
- (2020): Rapid strength formation of on-site carbon fiber reinforced high-performance concrete cured by ohmic heating. In: Construction and Building Materials, v. 244 (May 2020).
- (2020): 3D CA-LBM investigation of the interconnection of the platelet network within packed random porous structures. In: Construction and Building Materials, v. 239 (April 2020).
- (2019): Cement-Lime-Fly Ash Bound Macadam Pavement Base Material with Enhanced Early-Age Strength and Suppressed Drying Shrinkage via Incorporation of Slag and Gypsum. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2018): Use of Silica Fume and GGBS to Improve Frost Resistance of ECC with High-Volume Fly Ash. In: Advances in Civil Engineering, v. 2018 ( 2018).
- (2018): Use of calcium silicate-coated paraffin/expanded perlite materials to improve the thermal performance of cement mortar. In: Construction and Building Materials, v. 189 (November 2018).
Structurae cooperates with
