Yunpeng Liu 
- (2024): Mechanical Properties and Microstructure of Alkali-Activated Cements with Granulated Blast Furnace Slag, Fly Ash and Desert Sand. In: Buildings, v. 14, n. 11 (22 October 2024).
- (2024): The Influence of FA Content on the Mechanical and Hydration Properties of Alkali-Activated Ground Granulated Blast Furnace Slag Cement. In: Buildings, v. 14, n. 9 (25 August 2024).
- (2023): Sustainable cementitious material with ultra-high content partially calcined limestone-calcined clay. In: Construction and Building Materials, v. 373 (April 2023).
- (2024): Coconut coir dust extract as a novel green corrosion inhibitor for carbon steel in the chloride-contaminated concrete pore solution. In: Journal of Building Engineering, v. 82 (April 2024).
- (2019): Preparation of calcium carbonate binders via CO2 activation of magnesium slag. In: Cement and Concrete Research, v. 121 (July 2019).
- (2019): Early-state water migration characteristics of superabsorbent polymers in cement pastes. In: Cement and Concrete Research, v. 118 (April 2019).
- (2022): Effect of w/c ratio and antifreeze admixture on the frost damage of sulfoaluminate cement concrete at − 20 °C. In: Construction and Building Materials, v. 347 (September 2022).
- (2022): Enhancing the mechanical behaviour of concretes through polymer modification of the aggregate-cement paste interface. In: Journal of Building Engineering, v. 54 (August 2022).
- (2021): Performance evaluation of regenerated clinker from completely recyclable mortar. In: Construction and Building Materials, v. 309 (November 2021).
- (2021): Evaluation on recycled clinker production and properties from regeneration of completely recycle concrete. In: Construction and Building Materials, v. 301 (September 2021).
- (2021): Effects of Asphalt Modification of Paste–Aggregate Interface on the Transport and Mechanical Properties of Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 6 (June 2021).
- (2019): Air purification behavior of magnesium oxychloride cement combined with Ag/AgBr particle under visible light. In: Construction and Building Materials, v. 211 (June 2019).
- (2012): Experimental study on the stability of asphalt emulsion for CA mortar by laser diffraction technique. In: Construction and Building Materials, v. 28 (March 2012).
- (2013): Effect of early cement hydration on the chemical stability of asphalt emulsion. In: Construction and Building Materials, v. 42 (May 2013).
- (2014): A microstructural approach to adherence mechanism of cement and asphalt mortar (CA mortar) to repair materials. In: Construction and Building Materials, v. 66 (September 2014).
- (2016): Photocatalytic activity of Portland cement loaded with 3D hierarchical Bi 2 WO 6 microspheres under visible light. In: Construction and Building Materials, v. 120 (September 2016).
- (2016): Internal curing – A suitable method for improving the performance of heat-cured concrete. In: Construction and Building Materials, v. 122 (September 2016).
- (2016): Compatibility of repair materials with substrate low-modulus cement and asphalt mortar (CA mortar). In: Construction and Building Materials, v. 126 (November 2016).
- (2017): Properties of alkali-activated slag with addition of cation exchange material. In: Construction and Building Materials, v. 146 (August 2017).
- (2019): Rheological Properties of Sulfoaluminate Cement–Asphalt Emulsion Paste. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 1 (January 2019).
Structurae cooperates with
