Tiejun Liu 
- (2024): Impact of supplementary cementitious materials on the solid–liquid equilibrium curve of calcium in cement hydrates. In: Materials and Structures, v. 57, n. 3 (5 March 2024).
- (2024): Enhancing marine anti-washout concrete: Optimal silica fume usage for improved compressive strength and abrasion resistance. In: Construction and Building Materials, v. 428 (May 2024).
- (2024): Compressive strength development and microstructure evolution of mortars prepared using reactivated cementitious materials under carbonation curing. In: Developments in the Built Environment, v. 18 (April 2024).
- (2024): CO2 avoidance cost of fly ash geopolymer concrete. In: Construction and Building Materials, v. 416 (February 2024).
- (2024): A failure thickness prediction model for concrete exposed to external sulfate attack. In: Construction and Building Materials, v. 416 (February 2024).
- (2023): Identification of experienced temperature in mortar and concrete using microstructural image and deep learning. In: Construction and Building Materials, v. 409 (December 2023).
- (2023): Improving mechanical properties and durability of polyether sealant in prefabricated buildings with titanium dioxide and graphene. In: Construction and Building Materials, v. 408 (December 2023).
- (2024): Coarse-grained molecular dynamics study on submicron structuring of calcium silicate hydrate with enhanced tensile modulus and strength. In: Journal of Building Engineering, v. 82 (April 2024).
- (2023): Identification and analysis of seashells in sea sand using computer vision and machine learning. In: Case Studies in Construction Materials, v. 18 (July 2023).
- (2023): Calcium Leaching Mechanism of Cementitious Materials in the Marine Environment. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 6 (June 2023).
- (2023): Image-based reinforced concrete component mechanical damage recognition and structural safety rapid assessment using deep learning with frequency information. In: Automation in Construction, v. 150 (June 2023).
- (2021): Experimental and numerical study of the effects of solution concentration and temperature on concrete under external sulfate attack. In: Cement and Concrete Research, v. 139 (January 2021).
- (2020): A chemo-transport-damage model for concrete under external sulfate attack. In: Cement and Concrete Research, v. 132 (June 2020).
- (2023): Axial compressive behaviour of corroded steel reinforced concrete columns retrofitted with a basalt fibre reinforced polymer-ultrahigh performance concrete jacket. In: Composite Structures, v. 304 (January 2023).
- (2021): Comparative study on the effects of rice husk ash and silica fume on the freezing resistance of metakaolin-based geopolymer. In: Construction and Building Materials, v. 293 (July 2021).
- (2022): Calcium leaching from cement hydrates exposed to sodium sulfate solutions. In: Construction and Building Materials, v. 351 (October 2022).
- (2022): Effect of post-fire curing on compressive strength of ultra-high performance concrete and mortar. In: Construction and Building Materials, v. 346 (September 2022).
- (2021): Compressive strength assessment of sulfate-attacked concrete by using sulfate ions distributions. In: Construction and Building Materials, v. 293 (July 2021).
- (2016): Influence of axial loads on the health monitoring of concrete structures using embedded piezoelectric transducers. In: Structural Health Monitoring, v. 16, n. 2 (September 2016).
- (2021): Improvement in freeze-thaw durability of recycled aggregate permeable concrete with silane modification. In: Construction and Building Materials, v. 268 (January 2021).
- (2020): Electromechanical impedance instrumented circular piezoelectric-metal transducer for corrosion monitoring: modeling and validation. In: Smart Materials and Structures, v. 29, n. 3 (27 January 2020).
- (2020): Dynamic response of unsaturated full-space caused by a circular tunnel subjected to a vertical harmonic point load. In: Soil Dynamics and Earthquake Engineering, v. 130 (March 2020).
- (2018): Experimental investigation on the durability performances of concrete using cathode ray tube glass as fine aggregate under chloride ion penetration or sulfate attack. In: Construction and Building Materials, v. 163 (February 2018).
- (2019): Effects of temperature on the performance of the piezoelectric-based smart aggregates active monitoring method for concrete structures. In: Smart Materials and Structures, v. 28, n. 3 (March 2019).
- (2019): Effects of recycled CRT glass fine aggregate size and content on mechanical and damping properties of concrete. In: Construction and Building Materials, v. 202 (March 2019).
- (2014): Influence of creep and drying shrinkage of reinforced concrete shear walls on the axial shortening of high-rise buildings. In: Construction and Building Materials, v. 55 (March 2014).
- (2016): The damping property of recycled aggregate concrete. In: Construction and Building Materials, v. 102 (January 2016).
- (2016): In-situ crack propagation monitoring in mortar embedded with cement-based piezoelectric ceramic sensors. In: Construction and Building Materials, v. 126 (November 2016).
- (2014): Feasibility of water seepage monitoring in concrete with embedded smart aggregates by P-wave travel time measurement. In: Smart Materials and Structures, v. 23, n. 6 (June 2014).
- (2013): Exploratory study on water seepage monitoring of concrete structures using piezoceramic based smart aggregates. In: Smart Materials and Structures, v. 22, n. 6 (June 2013).
Structurae cooperates with
