Ning Liu 
- (2024): Development and property optimization of a sustainable phosphogypsum-based cementitious system with ground-granulated blast furnace slag and carbide slag. In: Construction and Building Materials, v. 449 (October 2024).
- (2024): Estimate of Zero-Plane Displacement for Open-Channel Flows with Submerged Rigid Vegetation. In: Journal of Engineering Mechanics (ASCE), v. 150, n. 10 (October 2024).
- (2024): Performance comparison of different filters based on fibre optic lighting systems and evaluation of architectural lighting effects. In: Building and Environment, v. 258 (June 2024).
- (2024): Cooling and lighting effects of new plastic optical fiber lighting system based on high-transmittance heat-insulating film. In: Energy and Buildings, v. 307 (March 2024).
- (2023): Characterising the effect of model dormitory on energy-saving intention of college students through the lens of reference points. In: Journal of Building Engineering, v. 77 (October 2023).
- (2023): Improving air quality through urban form optimization: A review study. In: Building and Environment, v. 243 (September 2023).
- (2023): Dust diffusion laws during partition excavation by boom-type roadheader in a metro tunnel. In: Tunnelling and Underground Space Technology, v. 141 (November 2023).
- (2023): Effects of zeolite on rheological properties of asphalt materials and asphalt-filler interaction ability. In: Construction and Building Materials, v. 382 (June 2023).
- (2023): A coupled heat and mass transfer model of green roof with water storage layer. In: Building and Environment, v. 235 (May 2023).
- (2023): Damage Detection in Reinforced Concrete Member Using Local Time-Frequency Transform Applied to Vibration Measurements. In: Buildings, v. 13, n. 1 (13 January 2023).
- (2022): Performance Optimization of Building Facade Floodlighting under Dynamic Sky Luminance. In: Journal of Architectural Engineering (ASCE), v. 28, n. 4 (December 2022).
- (2022): Analysis of bitumen material test methods and bitumen surface phase characteristics via atomic force microscopy-based infrared spectroscopy. In: Construction and Building Materials, v. 346 (September 2022).
- (2022): Innovative solutions for layout planning and implementation of a metro station and its accessory structures in mountainous cities, China. In: Tunnelling and Underground Space Technology, v. 129 (November 2022).
- (2022): Comparative research on the application of slag as an alternative to cement in binder-bentonite cutoff wall backfills. In: Construction and Building Materials, v. 325 (March 2022).
- (2022): Geological investigation and treatment measures against water inrush hazard in karst tunnels: A case study in Guiyang, southwest China. In: Tunnelling and Underground Space Technology, v. 124 (June 2022).
- (2021): Experimental Study on Lateral Bearing Mechanical Characteristics and Damage Numerical Simulation of Micropile. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2020): Application of Improved Single-Hole Superposition Theory in Nonequal Cross-Section Tunnel Intersection. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2020): An isogeometric continuum shell element for modeling the nonlinear response of functionally graded material structures. In: Composite Structures, v. 237 (April 2020).
- (2017): Isogeometric analysis of laminated composite and functionally graded sandwich plates based on a layerwise displacement theory. In: Composite Structures, v. 176 (September 2017).
- (2020): Investigation on the strength, durability and swelling of cement- solidified dredged sludge admixed fly ash and nano-SiO2. In: European Journal of Environmental and Civil Engineering, v. 26, n. 7 (July 2020).
- (2020): Mechanical Performances of Concrete Produced with Desert Sand After Elevated Temperature. In: International Journal of Concrete Structures and Materials, v. 14, n. 1 (7 January 2020).
- (2017): Combining Load-Controlled and Displacement-Controlled Algorithms to Model Thermal-Mechanical Snap-Through Instabilities in Structures. In: Journal of Engineering Mechanics (ASCE), v. 143, n. 8 (August 2017).
- (2018): Adaptive isogeometric analysis in structural frames using a layer-based discretization to model spread of plasticity. In: Computers & Structures, v. 196 (February 2018).
- (2013): A novel lightweight concrete-fabrication and its thermal and mechanical properties. In: Construction and Building Materials, v. 44 (July 2013).
- (2014): Experimental study of the influence of EPS particle size on the mechanical properties of EPS lightweight concrete. In: Construction and Building Materials, v. 68 (October 2014).
- (2016): Experimental research on magnesium phosphate cements containing alumina. In: Construction and Building Materials, v. 121 (September 2016).
- (2016): Investigation of the properties of asphalt mixtures incorporating reclaimed SBS modified asphalt pavement. In: Construction and Building Materials, v. 113 (June 2016).
- (2016): Effects of long-term aging on the properties of asphalt binder containing diatoms. In: Construction and Building Materials, v. 123 (October 2016).
- (2016): Experimental and model study on dynamic behaviour and fatigue damage of tunnel invert. In: Construction and Building Materials, v. 126 (November 2016).
- (2017): long-term safety of a deeply buried soft rock tunnel lining under inside-to-outside seepage conditions. In: Tunnelling and Underground Space Technology, v. 67 (August 2017).
Structurae cooperates with
