Jun Liu 
- (2023): Comparative study on the effect of steel and plastic synthetic fibers on the dynamic compression properties and microstructure of ultra-high-performance concrete (UHPC). In: Composite Structures, v. 324 (November 2023).
- (2023): Damage and energy absorption behaviour of composite laminates under impact loading using different impactor geometries. In: Composite Structures, v. 321 (October 2023).
- (2024): Analytical model of vertical load acting on jacked pipe considering soil arching effect in cohesionless soil. In: Underground Space, v. 14 (February 2024).
- (2023): Construction techniques and mechanical behavior of newly-built large-span tunnel ultra-short distance up-crossing the existing shield tunnel with oblique angle. In: Tunnelling and Underground Space Technology, v. 138 (August 2023).
- (2023): Aerodynamic Characteristics Analysis of Iced Conductor Based on BP Neural Network. In: Buildings, v. 13, n. 1 (13 January 2023).
- (2022): Behavior of deformation joints of RC utility tunnels considering multi-hazard conditions. In: Case Studies in Construction Materials, v. 17 (December 2022).
- (2022): Application potential analysis of biochar as a carbon capture material in cementitious composites: A review. In: Construction and Building Materials, v. 350 (October 2022).
- (2022): Differential Analysis and Prediction Optimization of Ground Surface Settlement Induced by Quasi-Rectangular Shield and Pipe Jacking Tunnelling. In: Advances in Civil Engineering, v. 2022 (January 2022).
- (2022): Behavior of Prefabricated Composite Arch Coupling Beam for Shear Walls Subjected to Cyclic Loading. In: Buildings, v. 12, n. 7 (5 July 2022).
- (2022): Behavior Choice Mechanisms and Tax Incentive Mechanisms in the Game of Construction Safety. In: Buildings, v. 12, n. 8 (31 July 2022).
- (2022): Discrepancies in using CO2 or water as heat-carrier fluid on the output temperature of deep coaxial borehole heat exchanger. In: Energy and Buildings, v. 270 (September 2022).
- (2022): Alkali-activated binders based on incinerator bottom ash combined with limestone-calcined clay or fly ash. In: Construction and Building Materials, v. 320 (February 2022).
- (2021): Better Rested than Sorry: Data-Driven Approach to Reducing Drowsy Driving Crashes on Interstates. In: Journal of Transportation Engineering, Part A: Systems, v. 147, n. 10 (October 2021).
- (2021): Application of Design-Expert Response Surface Methodology for the Optimization of Recycled Asphalt Mixture with Waste Engine Oil. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 5 (May 2021).
- (2016): A comparative study of driving performance in metropolitan regions using large-scale vehicle trajectory data: Implications for sustainable cities. In: International Journal of Sustainable Transportation, v. 11, n. 3 (October 2016).
- (2021): Chemical Aging Indexes and Rheological Parameters for Cracking Susceptibility Evaluation of Alaskan Polymer–Modified Asphalt Binders. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 3 (March 2021).
- (2021): Axial compression capacity of steel circular tube with large initial curvature: Column curve and application in structural assessment. In: Journal of Constructional Steel Research, v. 177 (February 2021).
- (2014): Classroom energy efficiency and air environment with displacement natural ventilation in a passive public school building. In: Energy and Buildings, v. 70 (February 2014).
- (2019): Analytical solution of heat and mass transfer process in internally cooled liquid desiccant dehumidifiers using refrigerant as cooling medium. In: Energy and Buildings, v. 190 (May 2019).
- (2020): Deformation of laminated and sandwich cylindrical shell with covered or embedded piezoelectric layers under compression and electrical loading. In: Composite Structures, v. 240 (May 2020).
- (2018): Analysis of laminated composite and sandwich plates based on the scaled boundary finite element method. In: Composite Structures, v. 187 (March 2018).
- (2019): Compressive failure of woven fabric reinforced thermoplastic composites with an open-hole: An experimental and numerical study. In: Composite Structures, v. 213 (April 2019).
- (2019): Comparison of internally cooled and adiabatic liquid desiccant dehumidification-regeneration system. In: Building and Environment, v. 163 (October 2019).
- (2015): Axisymmetric dynamic response of the multi-layered transversely isotropic medium. In: Soil Dynamics and Earthquake Engineering, v. 78 (November 2015).
- (2002): Dynamic failure numeric simulations of model concrete-faced rock-fill dam. In: Soil Dynamics and Earthquake Engineering, v. 22, n. 9-12 (October 2002).
- (2013): Dynamic interaction numerical models in the time domain based on the high performance scaled boundary finite element method. In: Earthquake Engineering and Engineering Vibration, v. 12, n. 4 (December 2013).
- (2017): Chloride transport and microstructure of concrete with/without fly ash under atmospheric chloride condition. In: Construction and Building Materials, v. 146 (August 2017).
- (2014): Bearing capacity and critical punch-through depth of spudcan on sand overlying clay. In: China Ocean Engineering, v. 28, n. 1 (February 2014).
- (2016): Damage evaluation of a simplified hull girder subjected to underwater explosion load: A semi-analytical model. In: Marine Structures, v. 45 (January 2016).
- (2018): Atmospheric chloride deposition in field concrete at coastal region. In: Construction and Building Materials, v. 190 (November 2018).
Structurae cooperates with
