Jian Liu 
- (2024): Microbial-induced carbonate reinforcement for 3D-printed concrete: testing in printable and mechanical strength. In: Materials and Structures, v. 57, n. 9 (10 October 2024).
- (2024): Levee Safety Monitoring: Algorithm for Feature Recognition in Point Clouds of Levee Landslides. In: KSCE Journal of Civil Engineering, v. 28, n. 10 (August 2024).
- (2024): Influence of low vacuum and high temperature condition on moisture transport and dry shrinkage of mature concrete. In: Journal of Building Engineering, v. 95 (October 2024).
- (2024): Interaction between microcapsules and crack using XFEM and data-driven fracture toughness predictive model. In: Structures, v. 64 (June 2024).
- (2023): Local buckling characteristic of hollow π-type steel-concrete composite support in hilly-gully region of loess tunnel. In: Engineering Failure Analysis, v. 143 (January 2023).
- (2024): Investigation of rheological properties of asphalt modified with low-temperature microencapsulated eutectic phase change materials. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2023): Involving prediction of dynamic modulus in asphalt mix design with machine learning and mechanical-empirical analysis. In: Construction and Building Materials, v. 407 (December 2023).
- (2024): Investigations on geopolymer-based seawater sea-sand high performance concrete slabs reinforced with basalt FRP bars under direct contact explosions. In: Construction and Building Materials, v. 411 (January 2024).
- (2023): Influence of CO2 enhancement of recycled aggregate on microstructure of ITZs in recycled concrete. In: Journal of Building Engineering, v. 65 (April 2023).
- (2023): Influence of recycled concrete aggregate enhancement methods on the change of microstructure of ITZs in recycled aggregate concrete. In: Construction and Building Materials, v. 371 (March 2023).
- (2022): Innovative synthetic data augmentation for dam crack detection, segmentation, and quantification. In: Structural Health Monitoring, v. 22, n. 4 (December 2022).
- (2022): Improving asphalt mix design considering international roughness index of asphalt pavement predicted using autoencoders and machine learning. In: Construction and Building Materials, v. 360 (December 2022).
- (2022): Improving asphalt mix design by predicting alligator cracking and longitudinal cracking based on machine learning and dimensionality reduction techniques. In: Construction and Building Materials, v. 354 (November 2022).
- (2022): Influence of low vacuum condition on mechanical performance and microstructure of hardened cement paste at early age. In: Construction and Building Materials, v. 346 (September 2022).
- (2022): Linking maximum-impact and cumulative-impact indices to quantify the cooling effect of waterbodies in a subtropical city: A seasonal perspective. In: Sustainable Cities and Society, v. 82 (July 2022).
- (2022): Investigation of ultra-high performance concrete slabs under contact explosions with a calibrated K&C model. In: Engineering Structures, v. 255 (March 2022).
- (2022): Investigation of geopolymer-based ultra-high performance concrete slabs against contact explosions. In: Construction and Building Materials, v. 315 (January 2022).
- (2021): The influences of cooling regimes on fire resistance of ultra-high performance concrete under static-dynamic coupled loads. In: Journal of Building Engineering, v. 44 (December 2021).
- (2021): Innovative Gypsum–Particle Composite Used as Building Structural Panels. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 8 (August 2021).
- (2021): Innovative design and construction of the sponge city facilities in the Chaotou Park, Talent Island, Jiangmen, China. In: Sustainable Cities and Society, v. 70 (July 2021).
- (2021): Microscopic adhesion properties of asphalt–mineral aggregate interface in cold area based on molecular simulation technology. In: Construction and Building Materials, v. 268 (January 2021).
- (2021): Investigations on the response of ceramic ball aggregated and steel fibre reinforced geopolymer-based ultra-high performance concrete (G-UHPC) to projectile penetration. In: Composite Structures, v. 255 (January 2021).
- (2019): Mesoscale analysis on ultra-high performance steel fibre reinforced concrete slabs under contact explosions. In: Composite Structures, v. 228 (November 2019).
- (2020): Mechanical behaviour and damage evolution of Beishan granite considering the transient and time-dependent effects of excavation unloading. In: European Journal of Environmental and Civil Engineering, v. 26, n. 8 (September 2020).
- (2018): Macroelement for Complete Shear Behavior of Continuous Deep Girders. In: ACI Structural Journal, v. 115, n. 4 (July 2018).
- (2021): Improvement of early age properties of Portland cement by a ternary hardening accelerating admixture. In: Magazine of Concrete Research, v. 73, n. 4 (February 2021).
- (2019): Mechanical properties and microstructures of hypergolic and calcined coal gangue based geopolymer recycled concrete. In: Construction and Building Materials, v. 221 (October 2019).
- (2010): Laboratory Test and Numerical Simulation of Time-Dependent Thermomechanical Behavior of the Three-Gorges Dam. In: Journal of Materials in Civil Engineering (ASCE), v. 22, n. 2 (February 2010).
- (2017): Influence of the Ground Displacement and Deformation of Soil around a Tunnel Caused by Shield Backfilled Grouting during Construction. In: Journal of Performance of Constructed Facilities (ASCE), v. 31, n. 3 (June 2017).
- (2016): Investigation of Ground Heave due to Jet Grouting in Soft Clay. In: Journal of Performance of Constructed Facilities (ASCE), v. 30, n. 6 (December 2016).
Structurae cooperates with
