Guoqiang Liu 
- (2024): Characterization of Three-Dimensional Strong Force Chain Properties of Mineral Aggregate Mixtures Based on the Discrete Element Method. In: Buildings, v. 14, n. 10 (8 October 2024).
- (2024): Evaluation on tension-compression anisotropic behavior of recycled asphalt mixture. In: Construction and Building Materials, v. 451 (November 2024).
- (2024): Measurement accuracy evaluation and optimization of embedded strain sensor for asphalt mixture: laboratory tests and finite element simulation. In: Smart Materials and Structures, v. 33, n. 7 (7 June 2024).
- (2024): Frosting characteristics of microchannel heat exchangers: Parametric studies and correlation development. In: Journal of Building Engineering, v. 90 (August 2024).
- (2024): Applicability of a new method for mesoscopic structure segmentation of asphalt mixture based on two-dimensional image. In: Construction and Building Materials, v. 421 (March 2024).
- (2023): Improved parameter acquisition of generalized Maxwell model in asphalt mixtures by continuous relaxation spectrum. In: Construction and Building Materials, v. 408 (December 2023).
- (2024): Frosting and defrosting characteristics of household refrigerators and freezers: Recent progress and perspectives. In: Energy and Buildings, v. 303 (January 2024).
- (2023): Forward Modeling and Model Test of Ground-Penetrating Radar toward Typical Asphalt Pavement Distresses. In: Advances in Civil Engineering, v. 2023 (February 2023).
- (2023): Effective Load Transfer Capacity Analysis for Asphalt Mixture Skeleton Based on Main Force Chain Characteristics and Discrete Element Method. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 9 (September 2023).
- (2023): An enhanced empirical Fourier decomposition method for bearing fault diagnosis. In: Structural Health Monitoring, v. 23, n. 2 (July 2023).
- (2023): An investigation on the efficient reverse cycle defrosting strategy for microchannel heat exchanger heat pump system. In: Journal of Building Engineering, v. 71 (July 2023).
- (2023): Case study on the large diameter pipe jacking for utility tunnel. In: Stavební obzor - Civil Engineering Journal, v. 32, n. 1 (30 April 2023).
- (2023): Micromechanics prediction of dynamic modulus for asphalt mastic considering filler distribution characteristic: A new perspective. In: Construction and Building Materials, v. 364 (January 2023).
- (2023): Dynamic integrated control for Chinese district heating system to balance the heat supply and heat demand. In: Sustainable Cities and Society, v. 88 (January 2023).
- (2021): Cost-effectiveness evaluation of pavement maintenance treatments using multiple regression and life-cycle cost analysis. In: Construction and Building Materials, v. 292 (July 2021).
- (2022): Asphalt mixture skeleton main force chains composition criteria and characteristics evaluation based on discrete element methods. In: Construction and Building Materials, v. 323 (March 2022).
- (2022): Probability-based diagnostic imaging with corrected weight distribution for damage detection of stiffened composite panel. In: Structural Health Monitoring, v. 21, n. 4 (January 2022).
- (2012): Baffled Bioreactor for Municipal Wastewater Treatment. In: Journal of Environmental Engineering (ASCE), v. 138, n. 3 (March 2012).
- (2021): Asphalt-Mixture Force Chains Length Distribution and Skeleton Composition Investigation Based on Computational Granular Mechanics. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 4 (April 2021).
- (2020): Field and laboratory evaluations of maintenance treatments for semi-rigid base asphalt pavement. In: Construction and Building Materials, v. 258 (October 2020).
- (2020): Quantitative Investigation of Aggregate Skeleton Force Chains of Asphalt Mixtures Based on Computational Granular Mechanics. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2020): Optimization of gradation design of recycled asphalt mixtures based on fractal and Mohr-Coulomb theories. In: Construction and Building Materials, v. 248 (July 2020).
- (2020): Heating process monitoring and evaluation of hot in-place recycling of asphalt pavement using infrared thermal imaging. In: Automation in Construction, v. 111 (March 2020).
- (2018): Degradation reliability modeling of stabilized base course materials based on a modulus decrement process. In: Construction and Building Materials, v. 177 (July 2018).
- (2018): Effects of aging on rheological properties of asphalt materials and asphalt-filler interaction ability. In: Construction and Building Materials, v. 168 (April 2018).
- (2019): Laboratory improvement and field assessment of Volumetric design method based on multi-point Supported skeleton for asphalt mixtures (V-S method). In: Construction and Building Materials, v. 224 (November 2019).
- (2019): Long-Term Performance and Deicing Effect of Sustained-Release Snow Melting Asphalt Mixture. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2016): Effects of temperature and loading frequency on asphalt and filler interaction ability. In: Construction and Building Materials, v. 124 (October 2016).
- (2017): Fatigue performance evaluation of asphalt mixtures based on energy-controlled loading mode. In: Construction and Building Materials, v. 157 (December 2017).
- (2017): Applicability of evaluation indices for asphalt and filler interaction ability. In: Construction and Building Materials, v. 148 (September 2017).
Structurae cooperates with
