Guojian Liu 
- (2023): Interlayer adhesion of 3D printed concrete: Influence of layer stacked vertically. In: Construction and Building Materials, v. 399 (October 2023).
- (2024): Reactive molecular dynamics study on carbon steel corrosion induced by chloride: Effects of applied potential and temperature. In: Construction and Building Materials, v. 411 (January 2024).
- (2023): 3D Printed concrete with coarse aggregates: Built‒in‒Stirrup permanent concrete formwork for reinforced columns. In: Journal of Building Engineering, v. 70 (July 2023).
- (2023): Degradation of mortar fully buried in saline soil containing sodium sulfate or magnesium sulfate. In: Construction and Building Materials, v. 369 (March 2023).
- (2023): Corrosion of Steel Fibers in Chloride-Contaminated Simulated Concrete Pore Solutions. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 2 (February 2023).
- (2023): Effect of multifunctional modification of waste rubber powder on the workability and mechanical behavior of cement-based materials. In: Construction and Building Materials, v. 363 (January 2023).
- (2023): Modified random hierarchical bundle model for predicting gas permeability of cement-based materials. In: Construction and Building Materials, v. 363 (January 2023).
- (2022): Investigation on the influence of modified waste rubber powder on the abrasion resistance of concrete. In: Construction and Building Materials, v. 357 (November 2022).
- (2023): Numerical simulation of effective diffusivity in concrete with random microcracks. In: Journal of Building Engineering, v. 63 (January 2023).
- (2022): Solidification mechanisms of copper in ferrite-rich Portland cement and its action mechanism in mineral phase. In: Journal of Building Engineering, v. 58 (October 2022).
- (2022): Relationship between water transport behaviour and interlayer voids of 3D printed concrete. In: Construction and Building Materials, v. 326 (April 2022).
- (2021): Extrusion-based 3D printing concrete with coarse aggregate: Printability and direction-dependent mechanical performance. In: Construction and Building Materials, v. 296 (August 2021).
- (2022): Mechanical properties and antifreeze performance of cement-based composites with liquid paraffin/diatomite capsule low-temperature phase change. In: Construction and Building Materials, v. 341 (July 2022).
- (2022): Steel fiber orientational distribution and effects on 3D printed concrete with coarse aggregate. In: Materials and Structures, v. 55, n. 3 (19 March 2022).
- (2021): Study on dynamic and static structural build-up of fresh cement paste with limestone powder based on structural kinetics model. In: Construction and Building Materials, v. 305 (October 2021).
- (2021): Investigation on preparation and multifunctionality of reduced graphene oxide cement mortar. In: Construction and Building Materials, v. 275 (March 2021).
- (2021): Experimental study on water absorption of unsaturated concrete: w/c ratio, coarse aggregate and saturation degree. In: Construction and Building Materials, v. 272 (February 2021).
- (2020): Investigation on parameters optimization for gas permeability testing of concrete: Inlet-gas pressure and confining pressure. In: Construction and Building Materials, v. 250 (July 2020).
- (2020): A comparable study on the deterioration of limestone powder blended cement under sodium sulfate and magnesium sulfate attack at a low temperature. In: Construction and Building Materials, v. 243 (May 2020).
- (2020): Effects of fly ash on Portland limestone cement under sulfate attack at low temperature. In: Magazine of Concrete Research, v. 72, n. 3 (February 2020).
- (2018): Fresh properties of a novel 3D printing concrete ink. In: Construction and Building Materials, v. 174 (June 2018).
- (2018): Numerical simulation of the effect of cement particle shapes on capillary pore structures in hardened cement pastes. In: Construction and Building Materials, v. 173 (June 2018).
- (2018): Experimental study on the performance of lime-based low carbon cementitious materials. In: Construction and Building Materials, v. 168 (April 2018).
- (2019): Rheological and harden properties of the high-thixotropy 3D printing concrete. In: Construction and Building Materials, v. 201 (March 2019).
- (2019): Influence of sodium hydroxide on the performance and hydration of lime-based low carbon cementitious materials. In: Construction and Building Materials, v. 200 (March 2019).
- (2016): Corrosion behavior of steel submitted to chloride and sulphate ions in simulated concrete pore solution. In: Construction and Building Materials, v. 115 (July 2016).
- (2017): Study of depassivation of carbon steel in simulated concrete pore solution using different equivalent circuits. In: Construction and Building Materials, v. 157 (December 2017).
- (2017): Modelling of diffusion behavior of ions in low-density and high-density calcium silicate hydrate. In: Construction and Building Materials, v. 155 (November 2017).
- (2018): Numerical modelling of elastic modulus and diffusion coefficient of concrete as a three-phase composite material. In: Construction and Building Materials, v. 189 (November 2018).
Structurae cooperates with
