Gang Liu 
- (2025): Study on a novel type of metallic damper. In: Journal of Building Engineering, v. 101 ( 2025).
- (2024): Study on the Improvement Performance of Different Clay Components with Desulfurization Gypsum-Containing Cementitious Material. In: Buildings, v. 14, n. 10 (8 October 2024).
- (2024): Study on Impact Resistance of Alkali-Activated Slag Cementitious Material with Steel Fiber. In: Buildings, v. 14, n. 11 (22 October 2024).
- (2025): Study on Stability of Soil Slope in Seasonally Frozen Region Based on Water Transfer and Strength Deterioration under Freeze–Thaw Cycles. In: Journal of Cold Regions Engineering, v. 39, n. 1 (March 2025).
- (2024): Understanding of leaning utility poles for visual monitoring of power distribution infrastructure. In: Journal of Civil Structural Health Monitoring, v. 14, n. 8 (June 2024).
- : Tensile analysis of loop joints with different overlap lengths. In: Journal of Asian Architecture and Building Engineering.
- (2024): Thermal Environment Analysis and Optimization for Large Space Buildings with Radiant Cooling Floors: A Case Study of Xianyang International Airport. In: Buildings, v. 14, n. 5 (24 April 2024).
- : Vibration Mitigation Using 3D-PSTMD for the Offshore Wind Turbine Considering Self-Excitation Behaviors. In: International Journal of Structural Stability and Dynamics.
- (2024): A Statistical Damage Constitutive Model for Graded Gravels Incorporating the Degree of Compaction and the Damage-Softening Index. In: International Journal of Geomechanics, v. 24, n. 4 (April 2024).
- (2024): Study on the curing conditions on the physico-mechanical and environmental performance of phosphogypsum-based artificial aggregates. In: Construction and Building Materials, v. 415 (February 2024).
- (2023): Study of synergistic effect of diatomite and modified attapulgite on reducing asphalt volatile organic compounds emission. In: Construction and Building Materials, v. 400 (October 2023).
- (2023): Study on the properties of an excess-sulphate phosphogypsum slag cement stabilized base-course mixture containing phosphogypsum-based artificial aggregate. In: Construction and Building Materials, v. 409 (December 2023).
- (2024): Study on the high temperature hydration characteristics of titanium extraction slag cementing fluid. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2023): Three-Dimensional Prestressed Tuned Mass Damper for Passive Vibration Control of Coupled Multiple DOFs Offshore Wind Turbine. In: Structural Control and Health Monitoring, v. 2023 (February 2023).
- (2023): Stress responses analysis of asphalt mixture particles based on average principle during the rolling compaction process of weld SBDP. In: Construction and Building Materials, v. 400 (October 2023).
- (2023): Structural design and experimental study of multi-ring and multi-disc magnetorheological valve. In: Smart Materials and Structures, v. 32, n. 4 (2 March 2023).
- (2023): Venis: A designer-centric support tool for building performance design at early design stages. In: Journal of Building Engineering, v. 63 (January 2023).
- (2021): Valorization of converter steel slag into eco-friendly ultra-high performance concrete by ambient CO2 pre-treatment. In: Construction and Building Materials, v. 280 (April 2021).
- (2019): Sensor fault detection with generalized likelihood ratio and correlation coefficient for bridge SHM. In: Journal of Sound and Vibration, v. 442 (March 2019).
- (2021): The utilization of waste incineration filter dust (WIFD) in sodium carbonate activated slag mortars. In: Construction and Building Materials, v. 313 (December 2021).
- (2020): Seismic performance of seawater and sea sand concrete-filled ultra-high performance concrete tubes under low-cycle reversed lateral loading. In: Advances in Structural Engineering, v. 24, n. 6 (December 2020).
- (2020): Stability Analysis of a Two-Layered Slope with Cracks by Finite Element Limit Analysis. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2020): Success DNA of a Record-Breaking Megaproject. In: Journal of Construction Engineering and Management, v. 146, n. 8 (August 2020).
- (2020): Utilization of municipal sewage sludge and waste glass powder in production of lightweight aggregates. In: Construction and Building Materials, v. 256 (September 2020).
- (2020): Sensor faults classification for SHM systems using deep learning-based method with Tsfresh features. In: Smart Materials and Structures, v. 29, n. 7 (May 2020).
- (2018): Study on the structure and properties of autoclaved aerated concrete produced with the stone-sawing mud. In: Construction and Building Materials, v. 184 (September 2018).
- (2018): VOCs characteristics and their relation with rheological properties of base and modified bitumens at different temperatures. In: Construction and Building Materials, v. 160 (January 2018).
- (2017): Structural damage diagnosis with uncertainties quantified using interval analysis. In: Structural Control and Health Monitoring, v. 24, n. 10 (October 2017).
- (2017): Slip and stress of tensile armors in unbonded flexible pipes close to end fitting considering an exponentially decaying curvature distribution. In: Marine Structures, v. 51 (January 2017).
- (2016): Tensile Properties of Hybrid Fiber-Reinforced Reactive Powder Concrete After Exposure to Elevated Temperatures. In: International Journal of Concrete Structures and Materials, v. 10, n. 1 (March 2016).
Structurae cooperates with
