Chang Liu 
- (2021): Overview of Tunnel Boring Machine Dynamic Balance Construction. In: IOP Conference Series: Earth and Environmental Science, v. 804, n. 2 (1 July 2021).
- (2024): Measurement, Spatial Differences, and the Dynamic Evolution of China's Urban Business Environment Levels. In: Journal of Urban Planning and Development, v. 150, n. 2 (June 2024).
- (2024): Model Test on the Collapse Evolution Law of Tunnel Excavation in Composite Strata with a Cavity. In: Buildings, v. 14, n. 4 (27 March 2024).
- (2023): Graded infill lattice structures design based on the moving morphable component method and partitioned coordinate mapping technique. In: Composite Structures, v. 326 (December 2023).
- (2023): Kinematical Analysis of 3D Seismic Stability of Slopes in Unsaturated and Inhomogeneous Soils Using a Pseudodynamic Method. In: International Journal of Geomechanics, v. 23, n. 9 (September 2023).
- (2023): Parallel Bar Compressive Strength Model for Pumice Concrete Considering Frost-Heave Stress. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 3 (March 2023).
- (2023): Limit Analysis for 3D Stability of Unsaturated Inhomogeneous Slopes Reinforced with Piles. In: International Journal of Geomechanics, v. 23, n. 4 (April 2023).
- (2023): Identification of High-Value Land for Green Infrastructure in Urban Fringe Areas: A Case Study of Zhengzhou, Henan Province, China. In: Journal of Urban Planning and Development, v. 149, n. 2 (June 2023).
- (2023): Interaction analysis between composite supports and rheological rock considering progressive hardening characteristic of shotcrete. In: Construction and Building Materials, v. 374 (April 2023).
- (2023): Long-term mechanical analysis of tunnel structures in rheological rock considering the degradation of primary lining. In: Underground Space, v. 10 (June 2023).
- (2023): Investigating the concentration distribution characteristics of methane in large storage facility using desorption-concentration gradient method and CFD simulation. In: Building and Environment, v. 228 (January 2023).
- (2023): Model tests on progressive collapse mechanism of a shallow subway tunnel in soft upper and hard lower composite strata. In: Tunnelling and Underground Space Technology, v. 131 (January 2023).
- (2022): Investigation of the performance of lateral ventilation in subway station fires. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 228 (September 2022).
- (2022): Lining cracking mechanism of old highway tunnels caused by drainage system deterioration: A case study of Liwaiao Tunnel, Ningbo, China. In: Engineering Failure Analysis, v. 137 (July 2022).
- (2022): High fidelity 3D mesoscale modeling of concrete with ultrahigh volume fraction of irregular shaped aggregate. In: Composite Structures, v. 291 (July 2022).
- (2020): A log-spiral limit equilibrium analysis for passive earth pressure under the effect of unsaturated seepage conditions. In: European Journal of Environmental and Civil Engineering, v. 27, n. 1 (November 2020).
- (2020): New Method for Characterizing the Shear Damage of Natural Rock Joint Based on 3D Engraving and 3D Scanning. In: International Journal of Geomechanics, v. 20, n. 2 (February 2020).
- (2020): Measuring the Smart Growth Pattern for Medium-Sized Cities. In: Journal of Urban Planning and Development, v. 146, n. 3 (September 2020).
- (2021): Influence of Dry Beach on the Dynamic Stability of Ash Storage Field: A Numerical Analysis. In: Advances in Civil Engineering, v. 2021 (January 2021).
- (2021): Interfacial properties of CFRP sheets and concrete subjected to variable amplitude fatigue loading. In: Structural Concrete, v. 22, n. 4 (June 2021).
- (2020): Intumescent coating thickness effect on the post-heat mechanical properties of composites. In: Structures, v. 28 (December 2020).
- (2020): Monitoring and modeling the damage evolution in engineered cementitious composites subjected to sulfate attack through continuous ultrasonic measurements. In: Construction and Building Materials, v. 262 (November 2020).
- (2020): Modelling and experimental validation on drilling delamination of aramid fiber reinforced plastic composites. In: Composite Structures, v. 236 (March 2020).
- (2021): Man-machine model: Pattern recognition and forecasts for complex structures supervised by multi-model ensembles. In: Structural Safety, v. 88 (January 2021).
- (2020): Modelling Triaxial Tests on Fibre-Reinforced Sands with Different Fibre Orientations Using the Discrete Element Method. In: KSCE Journal of Civil Engineering, v. 24, n. 8 (July 2020).
- (2017): Operation Effort Optimization for Planning Performance-Based Snow-Removal Projects. In: Journal of Computing in Civil Engineering, v. 31, n. 6 (November 2017).
- (1997): Model for Severity of Hurricanes in Gulf of Mexico. In: Journal of Waterway, Port, Coastal, and Ocean Engineering, v. 123, n. 3 (May 1997).
- (1997): Model for Recurrence Rate of Hurricanes in Gulf of Mexico. In: Journal of Waterway, Port, Coastal, and Ocean Engineering, v. 123, n. 3 (May 1997).
- (2015): Optimizing Earthmoving Job Planning Based on Evaluation of Temporary Haul Road Networks Design for Mass Earthworks Projects. In: Journal of Construction Engineering and Management, v. 141, n. 3 (March 2015).
- (2015): Investigations of nonlinear dynamic performance of top-and-seat with web angle connections subjected to sudden column removal. In: Engineering Structures, v. 99 (September 2015).
Structurae cooperates with
