Baoju Liu 
- (2024): Self-healing properties of mortar with crystalline admixture: experimental investigation and parameter optimization. In: Smart Materials and Structures, v. 33, n. 6 (May 2024).
- (2005): Influence of steam curing on the compressive strength of concrete containing supplementary cementing materials. In: Cement and Concrete Research, v. 35, n. 5 (May 2005).
- (2023): Influence of recycled concrete aggregate enhancement methods on the change of microstructure of ITZs in recycled aggregate concrete. In: Construction and Building Materials, v. 371 (March 2023).
- (2022): Utilization of desert sand in the production of sustainable cement-based materials: A critical review. In: Construction and Building Materials, v. 327 (April 2022).
- (2021): Effect of steam curing regimes on temperature and humidity gradient, permeability and microstructure of concrete. In: Construction and Building Materials, v. 281 (April 2021).
- (2022): Synergistic effect of glycine and triethanolamine on mechanical properties and permeability of cement mortar. In: Journal of Building Engineering, v. 51 (July 2022).
- (2022): Revealing spatiotemporal correlation of urban roads via traffic perturbation simulation. In: Sustainable Cities and Society, v. 77 (February 2022).
- (2021): Autogenous shrinkage and nano-mechanical properties of UHPC containing waste brick powder derived from construction and demolition waste. In: Construction and Building Materials, v. 306 (November 2021).
- (2021): New perspectives on utilization of CO2 sequestration technologies in cement-based materials. In: Construction and Building Materials, v. 272 (February 2021).
- (2020): Experimental Studies and Microstructure Analysis for Rapid-Hardening Cement Emulsified Asphalt Mortar. In: Journal of Construction Engineering and Management, v. 146, n. 12 (December 2020).
- (2020): Evolution of mechanical properties and permeability of concrete during steam curing process. In: Journal of Building Engineering, v. 32 (November 2020).
- (2020): Preparation and characterization of lightweight aggregate foamed geopolymer concretes aerated using hydrogen peroxide. In: Construction and Building Materials, v. 256 (September 2020).
- (2020): Synergistic enhancement of mechanical property of the high replacement low-calcium ultrafine fly ash blended cement paste by multiple chemical activators. In: Journal of Building Engineering, v. 32 (November 2020).
- (2020): Effect of steam curing on surface permeability of concrete: Multiple transmission media. In: Journal of Building Engineering, v. 32 (November 2020).
- (2020): Effect of curing regime on long-term mechanical strength and transport properties of steam-cured concrete. In: Construction and Building Materials, v. 255 (September 2020).
- (2020): Properties evolution of high-early-strength cement paste and interfacial transition zone during steam curing process. In: Construction and Building Materials, v. 252 (August 2020).
- (2020): Effects of steam curing regimes on the capillary water absorption of concrete: Prediction using multivariable regression models. In: Construction and Building Materials, v. 256 (September 2020).
- (2020): Effects of curing methods of concrete after steam curing on mechanical strength and permeability. In: Construction and Building Materials, v. 256 (September 2020).
- (2020): Heat damage of concrete surfaces under steam curing and improvement measures. In: Construction and Building Materials, v. 252 (August 2020).
- (2020): Mechanical and permeability properties of polymer-modified concrete using hydrophobic agent. In: Journal of Building Engineering, v. 31 (September 2020).
- (2020): Experimental study of performance of repair mortar: Evaluation of in-situ tests and correlation analysis. In: Journal of Building Engineering, v. 31 (September 2020).
- (2018): Effect of curing conditions on the permeability of concrete with high volume mineral admixtures. In: Construction and Building Materials, v. 167 (April 2018).
- (2019): Influence of Silane-based Impregnation Agent on the Permeability of Concretes. In: KSCE Journal of Civil Engineering, v. 23, n. 8 (June 2019).
- (2017): Image analysis for detection of bugholes on concrete surface. In: Construction and Building Materials, v. 137 (April 2017).
- (2017): Effect of mass ratio of asphalt to cement on the properties of cement modified asphalt emulsion mortar. In: Construction and Building Materials, v. 134 (March 2017).
- (2017): Factors influencing bugholes on concrete surface analyzed by image processing technology. In: Construction and Building Materials, v. 153 (October 2017).
Structurae cooperates with
