Zuohua Li 
- (2024): Bond strength theory between rebar and recycled aggregate concrete after freeze-thaw cycles under stress state Ⅰ: Uniaxial lateral compression. In: Construction and Building Materials, v. 411 (January 2024).
- (2023): Research on the Non-Planar Deformation Behavior of Reinforced Concrete Components Based on Size Effect. In: Buildings, v. 13, n. 7 (28 June 2023).
- (2022): Bond Strength between Recycled Concrete and Rebar under Stirrup Constraint after Freeze-thaw Cycles. In: KSCE Journal of Civil Engineering, v. 27, n. 2 (November 2022).
- (2022): Measurement of the stress of steel members using the ultrasonic phase spectrum. In: Structural Control and Health Monitoring, v. 29, n. 9 (10 August 2022).
- (2021): Experimental and theoretical study of bond stress distribution between recycled concrete and deformed steel bar after freeze–thaw damage. In: Structural Concrete, v. 23, n. 6 (December 2021).
- (2022): Bond performance of deformed rebar embedded in recycled aggregate concrete subjected to repeated loading after freeze–thaw cycles. In: Construction and Building Materials, v. 318 (February 2022).
- (2022): Development and experimental study of a novel steel brace with load-bearing adjustable capacity utilizing the buckling behavior of partial steel plates. In: Engineering Structures, v. 252 (February 2022).
- (2021): Design and experimental study of a buckling-restrained steel plate shear wall with novel buckling-restrained panels for improving bearing capacity and energy dissipation. In: Engineering Structures, v. 244 (October 2021).
- (2021): Seismic design method for multi-story SMA braced frames based on inelastic displacement ratio. In: Soil Dynamics and Earthquake Engineering, v. 147 (August 2021).
- (2017): Absolute stress measurement of structural steel members with ultrasonic shear-wave spectral analysis method. In: Structural Health Monitoring, v. 18, n. 1 (December 2017).
- (2021): Seismic performance of a novel prefabricated beam-to-column steel joint considering buckling behaviour of dampers. In: Engineering Structures, v. 229 (February 2021).
- (2020): Bond behavior between recycled aggregate concrete and deformed rebar after Freeze-thaw damage. In: Construction and Building Materials, v. 250 (July 2020).
- (2020): Experimental investigation of prefabricated beam-to-column steel joints for precast concrete structures under cyclic loading. In: Engineering Structures, v. 209 (April 2020).
- (2016): A dynamic analysis algorithm for RC frames using parallel GPU strategies. In: Computers and Concrete, v. 18, n. 5 (November 2016).
- (2019): Comparison of the Lcr wave TOF and shear‐wave spectrum methods for the uniaxial absolute stress evaluation of steel members. In: Structural Control and Health Monitoring, v. 26, n. 6 (May 2019).
- (2019): A Comparative Test Study on the Seismic Damage Sustained by Frame-Core Tube Structures. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2016): Numerical optimization of an impressed current cathodic protection system for reinforced concrete structures. In: Construction and Building Materials, v. 119 (August 2016).
- (2017): Corrosion behavior of a steel bar embedded in a cement-based conductive composite. In: Construction and Building Materials, v. 134 (March 2017).
- (2017): Numerical simulation and experimental investigation of the stray current corrosion of viaducts in the high-speed rail transit system. In: Construction and Building Materials, v. 157 (December 2017).
- (2016): Experimental study of damage evolution in cuboid stirrup-confined concrete. In: Materials and Structures, v. 49, n. 7 (July 2016).
- (2018): Seismic Performance and Failure Mechanism of Megabraced Frame-Core Tube Structures with Different Brace Patterns. In: Advances in Civil Engineering, v. 2018 ( 2018).
Structurae cooperates with
