Zhiwei Li 
- (2024): Adsorption Models and Kinetic Analysis of Molybdenum on the Sediment of the Yellow River in China. In: Journal of Environmental Engineering (ASCE), v. 150, n. 12 (December 2024).
- (2024): Dual room temperature target controlof district heating substation based on room temperature detection. In: Energy and Buildings, v. 318 (September 2024).
- (2024): Excess-sulphate phosphogypsum slag cement blended with magnesium ion: Part Ⅱ-the long-term microstructure characterisation and phase evolution. In: Construction and Building Materials, v. 431 (June 2024).
- (2024): Characterization and design of three-dimensional skeleton structure of asphalt mixture based on network science. In: Construction and Building Materials, v. 419 (March 2024).
- (2024): Passenger spatiotemporal distribution prediction in airport terminals based on physics-guided spatio-temporal graph convolutional network and its effect on indoor environment prediction. In: Sustainable Cities and Society, v. 106 (July 2024).
- (2024): Optimization on hydration efficiency of an all-solid waste binder: Carbide slag activated excess-sulphate phosphogypsum slag cement. In: Journal of Building Engineering, v. 86 (June 2024).
- (2024): Effect of MgO and superfine slag modification on the carbonation resistance of phosphogypsum-based cementitious materials: Based on hydration enhancement and phase evolution regulation. In: Construction and Building Materials, v. 415 (February 2024).
- (2023): Multi-scale investigation on the adhesion properties of warm-mixed recycled SBS modified asphalt. In: Construction and Building Materials, v. 377 (May 2023).
- (2023): Adhesion Mechanism of Warm-Mixed Recycled SBS Modified Asphalt Binder: Surface Free Energy, Microstructure and Chemical Compositions. In: Case Studies in Construction Materials, v. 19 (December 2023).
- (2023): A hybrid control method for district heating substations based on time-based room temperature demand. In: Energy and Buildings, v. 297 (October 2023).
- (2023): Passenger spatiotemporal distribution prediction in airport terminals based on insect intelligent building architecture and its contribution to fresh air energy saving. In: Sustainable Cities and Society, v. 97 (October 2023).
- (2023): Feature selection for indoor temperature prediction in large-space buildings based on transfer entropy and life cycle cost. In: Building and Environment, v. 243 (September 2023).
- (2023): Improving room temperature stability and operation efficiency using a model predictive control method for a district heating station. In: Energy and Buildings, v. 287 (May 2023).
- (2022): Performance of inclined-vertical framed retaining wall for excavation in clay. In: Tunnelling and Underground Space Technology, v. 130 (December 2022).
- (2022): Development of a novel parallel soft manipulator with sensing capabilities. In: Smart Materials and Structures, v. 32, n. 1 (2 December 2022).
- (2022): Fatigue damage evolution in asphalt mixture based on X-ray CT images. In: Construction and Building Materials, v. 358 (December 2022).
- (2023): Laboratory investigation of the increased content of aged SBS modified asphalt attributable to the warm-mixed recycled technology. In: Construction and Building Materials, v. 362 (January 2023).
- (2022): Data-oriented distributed overall optimization for large-scale HVAC systems with dynamic supply capability and distributed demand response. In: Building and Environment, v. 221 (August 2022).
- (2022): Experimental study on phase change heat storage of valley electricity and economic evaluation of commercial building heating. In: Sustainable Cities and Society, v. 86 (November 2022).
- (2022): Hydration characterization of Mg2+ blended excess-sulphate phosphogypsum slag cement system during early age. In: Construction and Building Materials, v. 345 (August 2022).
- (2022): Mechanistic study of graphene reinforcement of rheological performance of recycled polyethylene modified asphalt: A new observation from molecular dynamics simulation. In: Construction and Building Materials, v. 320 (February 2022).
- (2022): A model-free method for identifying time-delay characteristics of HVAC system based on multivariate transfer entropy. In: Building and Environment, v. 217 (June 2022).
- (2014): Evaluation of Climate Change Impact on Drinking Water Treatment Plant Operation. In: Journal of Environmental Engineering (ASCE), v. 140, n. 9 (September 2014).
- (2021): Effect of anti-icing additives on the stability of emulsified asphalt binders. In: Construction and Building Materials, v. 275 (March 2021).
- (2021): Nonlinear rheological characteristics of fine aggregate matrix based on FT-rheology. In: Construction and Building Materials, v. 274 (March 2021).
- (2021): Evaluation of the adhesion characteristics of material composition for polyphosphoric acid and SBS modified bitumen based on surface free energy theory. In: Construction and Building Materials, v. 266 (January 2021).
- (2020): Design and online calibration methods of pressure-independent intelligent regulating valve based on hydrodynamic resistance characteristics. In: Energy and Buildings, v. 224 (October 2020).
- (2020): Effect of Sodium Hypochlorite-Activated Crumb Rubber on Rheological Properties of Rubber-Modified Asphalt. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 11 (November 2020).
- (2019): Aerodynamics of high-speed maglev trains passing each other in open air. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 188 (May 2019).
- (2018): Effect of Elevated Temperature on Meso- and Micro-Structure and Compressive Strength of High-Strength Concrete and Mortar Containing Blast-Furnace Slag. In: Journal of Advanced Concrete Technology, v. 16, n. 10 (October 2018).
Structurae cooperates with
