Yue Li 
- (2024): Substitution of blast furnace slag by melting furnace slag as active component in green concrete application. In: Construction and Building Materials, v. 449 (October 2024).
- (2024): Test of Cl- and SO42- in concrete exposed to composite salt environment by conductivity titration. In: Construction and Building Materials, v. 443 (September 2024).
- (2024): Study on damage deterioration mechanism and service life prediction of hybrid fibre concrete under different salt freezing conditions. In: Construction and Building Materials, v. 435 (July 2024).
- (2023): Structural vibration-based identification of delamination in CFRP cylinders using complex frequency domain correlation and CNN. In: Composite Structures, v. 321 (October 2023).
- (2023): Two-Parameter–Based Damage Measure for Probabilistic Seismic Analysis of Concrete Structures. In: ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, v. 9, n. 1 (March 2023).
- (2022): The study of effect of carbon nanotubes on the compressive strength of cement-based materials based on machine learning. In: Construction and Building Materials, v. 358 (December 2022).
- (2022): Study on graphene oxide reinforced magnesium phosphate cement composites. In: Construction and Building Materials, v. 359 (December 2022).
- (2022): Strength deterioration and crack dilation behavior of BFRC under dynamic fatigue loading. In: Case Studies in Construction Materials, v. 16 (June 2022).
- (2023): Time-dependent reliability assessment of steel pipelines subjected to localized corrosion. In: Structure and Infrastructure Engineering, v. 19, n. 11 (March 2023).
- (2021): Time-Dependent Reliability Analysis of Buried Water Distribution Network: Combined Finite-Element and Probabilistic Approach. In: ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, v. 7, n. 4 (December 2021).
- (2021): Time-dependent reliability-based redundancy assessment of deteriorated RC structures against progressive collapse considering corrosion effect. In: Structural Safety, v. 89 (March 2021).
- (2017): A study on effects of water-cement ratio and crack width on chloride ion transmission rate in concrete. In: Computers and Concrete, v. 19, n. 4 (April 2017).
- (2011): Stochastic Modeling of Snow Loads Using a Filtered Poisson Process. In: Journal of Cold Regions Engineering, v. 25, n. 1 (March 2011).
- (2013): Study on a Simplified Calculation Method for Hydrodynamic Pressure to Slender Structures Under Earthquakes. In: Journal of Earthquake Engineering, v. 17, n. 5 ( 2013).
- (2012): Utilization of phase change materials and rubber particles to improve thermal and mechanical properties of mortar. In: Construction and Building Materials, v. 28 (March 2012).
- (2015): Toughness improvement of epoxy resin mortar by incorporation of ground calcium carbonate. In: Construction and Building Materials, v. 100 (December 2015).
- (2017): A study of the bonding performance of magnesium phosphate cement on mortar and concrete. In: Construction and Building Materials, v. 142 (July 2017).
- (2018): A Study on Ceramsite Production Using Dredging Sea Mud and Its Biofilm Formation Capacity Evaluation. In: Advances in Civil Engineering, v. 2018 ( 2018).
- (2019): A study on the deterioration of interfacial bonding properties of chloride-contaminated reinforced concrete after electrochemical chloride extraction treatment. In: Construction and Building Materials, v. 197 (February 2019).
- (2010): Uniform hazard versus uniform risk bases for performance-based earthquake engineering of light-frame wood construction. In: Earthquake Engineering and Structural Dynamics, v. 39, n. 11 (September 2010).
Structurae cooperates with
